Acta Metallurgica Sinica (English Letters) ›› 2021, Vol. 34 ›› Issue (7): 1007-1020.DOI: 10.1007/s40195-020-01167-0
Previous Articles Next Articles
Y. D. Liu1,2, J. H. Liu1,2, W. S. Gu1,2, H. L. Li2, W. H. Li1,2, Z. L. Pei2(), J. Gong2, C. Sun2()
Received:
2020-07-29
Revised:
2020-09-01
Accepted:
2020-09-22
Online:
2021-11-23
Published:
2020-11-23
Contact:
Z. L. Pei,C. Sun
About author:
C. Sun, csun@imr.ac.cnY. D. Liu, J. H. Liu, W. S. Gu, H. L. Li, W. H. Li, Z. L. Pei, J. Gong, C. Sun. Oxidation, Mechanical and Tribological Behaviors of the Ni/cBN Abrasive Coating-Coated Titanium Alloys[J]. Acta Metallurgica Sinica (English Letters), 2021, 34(7): 1007-1020.
Add to citation manager EndNote|Ris|BibTeX
Fig. 4 Isothermal oxidation kinetic curves a-c and corresponding oxidation rate constants d-f for the TC4, the abrasive coating at 500 °C a, d, 600 °C b, e, 700 °C c, f, respectively
Fig. 7 Cross-sectional morphologies of the coated specimens after oxidation at 500 °C a, b, 600 °C d, e, 700 °C g, h, corresponding line scanning analysis c, f, i across the coating/substrate interface as shown by a black straight line on the micrographs b, e, h
Position | Composition (at.%) | ||
---|---|---|---|
Ni | Ti | Al | |
1 | 75.83 | 24.17 | - |
2 | 51.39 | 48.61 | - |
3 | 75.20 | 24.80 | - |
4 | 49.88 | 43.19 | 6.93 |
5 | 74.48 | 25.52 | - |
6 | 49.65 | 44.15 | 6.20 |
7 | 30.07 | 64.12 | 5.81 |
Table 1 Chemical compositions of the intermetallic compounds for Ni/cBN coatings
Position | Composition (at.%) | ||
---|---|---|---|
Ni | Ti | Al | |
1 | 75.83 | 24.17 | - |
2 | 51.39 | 48.61 | - |
3 | 75.20 | 24.80 | - |
4 | 49.88 | 43.19 | 6.93 |
5 | 74.48 | 25.52 | - |
6 | 49.65 | 44.15 | 6.20 |
7 | 30.07 | 64.12 | 5.81 |
Fig. 8 Tensile performance of the coated and uncoated specimens at different temperatures. a Specified disproportionate elongation strength; b tensile strength; c fracture elongation; d reduction of cross-section area; e engineering stress-strain curves
Fig. 9 Fracture morphologies of the specimens after tensile tests. a, d, c, f, h, k uncoated specimens at RT, 500 °C and 600 °C, respectively; b, e, g, j, i, l coated specimens at RT, 500 °C and 600 °C, respectively
Fig. 12 Surface micrographs a, b, optical profilometry images c, d and line profiles e, f for the wear tracks of TC4 a, c, e, Ni/cBN coating b, d, f at RT
Fig. 13 Surface micrographs a, b, optical profilometry images c, d and line profiles e, f for the wear tracks of TC4(a, c, e), Ni/cBN coating b, d, f at 600 °C
[1] | R.R. Boyer , Mater. Sci. Eng. A 213, 103 (1996) |
[2] | S. Rani, A.K. Agrawal, V. Rastogi , Case Stud. Eng. Fail. Anal. 8, 1(2017) |
[3] | N. Fois, J. Stringer , Wear 304, 202 (2013) |
[4] | K. Laul, S. Rahemanji , Adv. Mater. Res. 170, 54(2012) |
[5] |
R. Rajendran , Eng. Fail. Anal. 26, 355(2012)
DOI URL |
[6] |
I. Gurrappa , J. Alloys Compd. 389, 190(2005)
DOI URL |
[7] |
M. Berthaud, I. Popa, R. Chassagnon, O. Heintz, J. Lavková, S. Chevalier , Corros. Sci. 164, 108049(2020)
DOI URL |
[8] | D.G. Teer, F.B. Salem , Thin Solid Films 45, 583 (1977) |
[9] |
R. David, D. Mark, B. Justin , Mater. High Temp. 33, 1(2016)
DOI URL |
[10] |
J.C. Williams, E.A. Starke , Acta Mater. 51, 5775(2003)
DOI URL |
[11] | M. Watson , N. Fois, Wear 338-339, 268(2015) |
[12] |
Y.D. Liu, J. Sun, Z.L. Pei, W. Li, J.H. Liu, J. Gong, C. Sun , Corros. Sci. 167, 108486(2020)
DOI URL |
[13] | D. Kim, D. Seo, X. Huang, T. Sawatzky, H. Saari, J. Hong, Y.W. Kim , Int. Mater. Rev. 59, 297(2014) |
[14] | Y.D. Liu, J.P. Zhang, Z.L. Pei, J.H. Liu, W.H. Li, J. Gong , C. Sun, Wear 456-457, 203389(2020) |
[15] |
B. Li, J.H. Jia, Y.M. Gao, H.J. Guo, M.M. Han, W.Z. Wang, Acta Metall. Sin. (Engl. Lett.) 30, 801(2017)
DOI URL |
[16] | C.F. Sun, Y.B. Wang, Q. Su, Z.G. Guo, L. Shi , Adv. Mater. Sci. Eng. 2016,1(2016) |
[17] | J.H. Liu, Y.D. Liu, Z.L. Pei, W.H. Li, W.B. Shi, J. Gong , C. Sun, Wear 452-453, 203300(2020) |
[18] | Z.X. Ping, G.A. Cheng, Y.D. He, Acta Metall. Sin. (Engl. Lett.) 23, 137(2010) |
[19] |
W. Wang, S.Q. Qian, X.Y. Zhou , J. Mater. Sci. 45, 1617(2010)
DOI URL |
[20] | S.R. Fu, L.J. Yang, P. Wang, S.P. Wang, Z.X. Li , Coatings 10, 702 (2020) |
[21] | R. Tyagi, D.S. Xiong, J. Li, J. Dai , Wear 269, 884 (2010) |
[22] |
M.A. Farrokhzad , Surf. Coat. Technol. 309, 390(2017)
DOI URL |
[23] |
J.R. Davenport, L. Mendez-Garcia, S. Purkayastha, M.E. Hancock, R.J. Stearn, W.J. Clegg , Mater. Sci. Technol. 30, 1877(2014)
DOI URL |
[24] |
H. Guleryuz, H. Cimenoglu , J. Alloys. Compd. 472, 241(2009)
DOI URL |
[25] |
R. Siab, G. Bonnet, J.M. Brossard, J. Balmain, J.F. Dinhut , Appl. Surf. Sci. 253, 3425(2007)
DOI URL |
[26] |
H. Guleryuz, H. Cimenoglu , Surf. Coat. Technol. 192, 164(2005)
DOI URL |
[27] |
K. Katuku, A. Koursaris, I. Sigalas , Corros. Sci. 64, 55(2012)
DOI URL |
[28] |
D.B. Wei, P.Z. Zhang, Z.J. Yao, J.T. Zhou, X.F. Wei, P. Zhou , Appl. Surf. Sci. 261, 800(2012)
DOI URL |
[29] |
H.L. Du, P.K. Datta, D.B. Lewis, J.S. Burnell Gray, Corros. Sci. 36, 631(1994)
DOI URL |
[30] |
R. Peraldi, D. Monceau, B. Pieraggi , Oxid. Met. 58, 249(2002)
DOI URL |
[31] |
R. Peraldi, D. Monceau, B. Pieraggi , Oxid. Met. 58, 275(2002)
DOI URL |
[32] |
Y. Zhou, Q. Wang, D.L. Sun, X.L. Han , J. Alloys. Compd. 509, 1201(2011)
DOI URL |
[33] |
G. Khosravi, M.H. Sohi, H.M. Ghasemi, A.K. Vafadar , Int. J. Surf. Sci. Eng. 9, 43(2015)
DOI URL |
[34] |
P. Novak, P. Pokorný, V. Vojtech, A. Knaislova, A. Skolakov, J. Capek, M. Karlíkb, J. Kopecekc , Mater. Chem. Phys. 155, 113(2015)
DOI URL |
[35] |
C. Velmurugan, V. Senthilkumar, S. Sarala, J. Arivarasan , J. Mater. Process. Technol. 234, 272(2016)
DOI URL |
[36] | Y.X. Xia, D. Li , Rare Met. Mater. Eng. 30, 388(2001) |
[37] | C. Parlikar, M.Z. Alam, D. Chatterjee, D.K. Das , Mater. Sci. Eng. A 682, 518 (2017) |
[38] | S. Gao, J.S. Hou, F. Yang, Y.G. Guo, C.S. Wang, L.Z. Zhou , Mater. Sci. Eng. A 706, 153 (2017) |
[39] | R. Braun, N. Laska, S. Knittel, U. Schulz , Mater. Sci. Eng. A 699, 118 (2017) |
[40] |
Z.P. Zhao, N.H. Tariq, J.R. Tang, C.L. Jia, X. Qiu, Y.P. Ren, H.H. Liu, Y.F. Shen, H. Du, X.Y. Cui, J.Q. Wang, T.Y. Xiong , Mater. Des. 185, 108249(2020)
DOI URL |
[41] |
R. Aninat, N. Valle , Corros. Sci. 156, 171(2019)
DOI |
[42] |
M. Franco, W. Sha, G. Aldic, S. Malinov, H. Çimenoğlu , Tribol. Int. 97, 265(2016)
DOI URL |
[43] |
N. Sunwang, P. Wangyao, Y. Boonyongmaneerat , Surf. Coat. Technol. 206, 1096(2011)
DOI URL |
[44] | R.S. Magaziner, V.K. Jain, S. Mall , Wear 264, 1002 (2008) |
[45] | M.C. Gui, S.B. Kang, J.M. Lee , Wear 240, 186 (2000) |
[46] |
J.H. Choi, G. Gyawali, D.R. Dhakal, B. Joshi, S.W. Lee, Acta Metall. Sin. (Engl. Lett.) 33, 573(2020)
DOI URL |
[47] | Z.H. Li, H.F. Zheng, Y.M. Zhu, Q.M. Yuan , Key Eng. Mater. 280-283, 1395(2005) |
[48] | W.H. Xue, S.Y. Gao, D.L. Duan, J.P. Zhang, Y. Liu , S. Li, Wear 410-411, 25(2018) |
[49] | R. Endo, M. Shima, M. Susa , Int. J. Thermophys. 31, 1991 (2010) |
[1] | Guoliang Ma, Yong Zhao, Hongzhi Cui, Xiaojie Song, Mingliang Wang, Kwangmin Lee, Xiaohua Gao, Qiang Song, Canming Wang. Addition Al and/or Ti Induced Modifications of Microstructures, Mechanical Properties, and Corrosion Properties in CoCrFeNi High-Entropy Alloy Coatings [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(8): 1087-1102. |
[2] | Jiafen Song, Zishu Chai, Jian Zheng, Qingfeng Wu, Feng He, Zenan Yang, Junjie Li, Jincheng Wang, Haiou Yang, Zhijun Wang. Design Fe-based Eutectic Medium-Entropy Alloys Fe2NiCrNbx [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(8): 1103-1108. |
[3] | Ling-Yi Qian, Jing Wang, Yun-Shan Guo, He Liu, Ze-Bin Bao. Influences of Iridium and Palladium on Oxidation Resistance of PtAl Coating [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(8): 1120-1130. |
[4] | Fuzhao Yan, Jing Li, Yiyi Li, Liangyin Xiong, Shi Liu. Formation Mechanism of Nanoparticles in Fe-Cr-Al ODS Alloy Fabricated by Direct Oxidation Method [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(7): 963-972. |
[5] | Xuan Kong, Yang Liu, Minghui Chen, Tao Zhang, Fuhui Wang. High Temperature Oxidation and Tribological Behaviors of NiCrAl-Graphite Self-Lubricating Composites [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(7): 900-912. |
[6] | B. Mehdi, R. Badji, V. Ji, B. Alili, D. Bradai, W. Bedjaoui, F. Deschaux-Beaume, F. Brisset. Unveiling the Residual Stresses, Local Micromechanical Properties and Crystallographic Texture in a Ti-6Al-4V Weld Joint [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(7): 997-1006. |
[7] | Zhitao Yu, Minghui Chen, Qunchang Wang, Xiaolan Wang, Fuhui Wang. Effect of Interfacial Microstructure on Mechanical and Tribological Properties of Cu/WS2 Self-lubricating Composites Sintered by Spark Plasma Sintering [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(7): 913-924. |
[8] | Liwen Tan, Zhongwei Wang, Yanlong Ma. Tribocorrosion Behavior and Degradation Mechanism of 316L Stainless Steel in Typical Corrosive Media [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(6): 813-824. |
[9] | Dong Wu, Shitong Wei, Shanping Lu. A Study of Microstructure and Mechanical Properties for the Autogenous Single-Pass Butt Weldment of a Ferritic/Martensitic Steel Using Gas Tungsten Arc Welding [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(5): 628-638. |
[10] | Hui Xiao, Yu Liu, Kai Wang, Zhipeng Wang, Te Hu, Touwen Fan, Li Ma, Pingying Tang. Effects of Mn Content on Mechanical Properties of FeCoCrNiMnx (0≤x≤0.3) High-Entropy Alloys: A First-Principles Study [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(4): 455-464. |
[11] | Ibrahim Ondicho, Bernard Alunda, Fredrick Madaraka, Melody Chepkoech. Effect of Bimodal Grain Size Distribution on the Strain Hardening Behavior of a Medium-Entropy Alloy [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(4): 465-475. |
[12] | Jinsen Tian, Jiang Ma, Ming Yan, Zhuo Chen, Jun Shen, Jing Wu. Orientation Dependence of the Micro-Pillar Compression Strength in an Electron Beam Melted Ti-6Al-4V Alloy [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(4): 476-484. |
[13] | Hua-Zhen Jiang, Zheng-Yang Li, Tao Feng, Peng-Yue Wu, Qi-Sheng Chen, Yun-Long Feng, Long-Fei Chen, Jing-Yu Hou, He-Jian Xu. Effect of Process Parameters on Defects, Melt Pool Shape, Microstructure, and Tensile Behavior of 316L Stainless Steel Produced by Selective Laser Melting [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(4): 495-510. |
[14] | Long Xin, Yongming Han, Ligong Ling, Yonghao Lu, Tetsuo Shoji. Surface Oxidation and Subsurface Microstructure Evolution of Alloy 690TT Induced by Partial Slip Fretting Corrosion in High-Temperature Pure Water [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(4): 543-554. |
[15] | Chun-Hua Ma, Fu-Sheng Pan, Ding-Fei Zhang, Ai-Tao Tang, Zhi-Wen Lu. Effects of Sb Addition on Microstructural Evolution and Mechanical Properties of Mg-9Al-5Sn Alloy [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(2): 278-288. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||