Effects of Washing and Drying on Crystal Structure and Pore Size Distribution (PSD) of Zn4O13C24H12 Framework (IRMOF-1)

doi:10.1007/s40195-013-0105-0

Abstract

Abstract:

In this study, the effects of various methods of washing and drying of MOF-5 nanocrystals on structure formation were investigated. Eight samples of MOF-5 were synthesized under different conditions. TGA, XRD and PSD analysis were applied to characterize of the samples. The methods of washing and drying were found to be important in determining the final structure of MOF-5s. MOF-5 with high BET surface area can be obtained by choosing a suitable method of washing and drying. According to the results obtained in this work, it was found that vacuum drying at 425℃ is sufficient to dissolve the MOF-5-DMF. Similar results were obtained by washing method (with CH₂Cl₂ and CHCl₃), when compared with vacuum drying at 425℃ according to XRD test. The pore size distribution of samples 1-5 and 8 were calculated by SHN1 method and results showed that the samples in which solvent vacuum was DMF, have lower pore volume, uniform pore size distribution and the pore size are smaller than samples 3, 4 and 8. It was also found that activated MOF-5 can be converted to its deactivated form prior to drying of the samples.

Key words: Metal organic framework (MOF), MOF-5 nanocrystal, Characterization, SHN1 method

Mehrzad Arjmandi,Majid Pakizeh. Effects of Washing and Drying on Crystal Structure and Pore Size Distribution (PSD) of Zn₄O₁₃C₂₄H₁₂ Framework (IRMOF-1)[J]. Acta Metallurgica Sinica (English Letters), DOI: 10.1007/s40195-013-0105-0.

References

[1]M. Dinca and J.R. Long, Angew. Chem. Int. Ed. 47(2008) 6766.
[2]N.L. Rosi, J. Eckert, M. Eddaoudi, D.T. Vodak, J. Kim, M.O'Keeffe and O.M. Yaghi, Science 300 (2003) 1127.
[3]J.W. Yoon, Y.K. Seo, Y.K. Hwang, J.S. Chang, H. Leclerc, S.Wuttke, P. Bazin, A. Vimont, M. Daturi, E. Bloch, P.L. Llewellyn, C.Serre, P. Horcajada, J.M. Greneche, A.E. Rodrigues and G. Ferey,Angew. Chem. Int. Ed. 49 (2010) 5949.
[4]R.J. Kuppler, D.J. Timmons, Q.R. Fang, J.R. Li, T.A. Makal,M.D. Young, D.Yuan, D. Zhao,W. Zhuang and H.C. Zhou, Coord. Chem.Rev. 253 (2009) 3042.
[5]R.C. Huxford, J.D. Rocca and W. Lin, Curr. Opin. Chem.Biol. 14) (2010) 262.
[6]J.Y. An, S.J. Geib and N.L. Rosi, J. Am. Chem. Soc.131 (2009) 8376.
[7] G. de Combarieu, M. Morcrette, F. Millange, N. Guillou, J.Cabana, C.P. Grey, I. Margiolaki, G. Ferey and J.M. Tarascon, Chem.Mater. 21 (2009) 1602.
[8]Y.K. Hwang, D.Y. Hong, J.S. Chang, S.H. Jhung, Y.K. Seo, J.Kim, A. Vimont, M. Daturi, C. Serre and G. Ferey, Angew. Chem. Int.Ed. 47 (2008) 4144.
[9]L.F. Yang, S. Kinoshita, T. Yamada, S. Kanda, H. Kitagawa,M. Tokunaga, T. Ishimoto, T. Ogura, R. Nagumo, A. Miyamoto and M.Koyama, Angew. Chem. Int. Ed. 49 (2010) 5348.
[10]H. Li, M. Eddaoudi, M. O'Keeffe and O.M. Yaghi, Nature 402 (1999) 276
[11]M. Muller, S. Hermes, K. Kaehler, M.W.E. van de Berg, M.Muhler and R.A. Fischer, Chem. Mater. 20 (2008) 4576.
[12]F. Salles, H. Jobic, G. Maurin, M.M. Koza, P.L.Llewwellyn, T. Devic, C. Serre and G. Ferey, Phys. Rev. Lett.100 (2008) 245901.
[13]J.S. Choi, W.J. Son, J. Kim, and W.S. Ahn, Microporous Mesoporous Mater. 116 (2008) 727.
[14]F. Sun, Z. Yin, Q. Q. Wang, D. Sun, M. Zeng and M. Kurmoo,Angew. Chem. Int. Ed. 52 (2013) 4538.
[15]S. Brunauer, P.H. Emmett and E. Teller, J. Am. Chem. Soc.60 (1938) 309.
[16]A. Shahsavand and M.N. Shahrak, Colloids Surf. A 378(2011) 1.
[17] Z. Jia, H. Li, Zh. Yu, P. Wang and X. Fan, Mater. Lett.65 (2011) 2445.
[18]L. Zhang and Y.H. Hu, Mater. Sci. Eng. B 176(2011) 573.
[19]E.V. Perez, K.J. Jr Balkus, J.P. Ferraris and I.H.Musselman, J. Membr. Sci. 328 (2009) 165.
[20]T. Mueller, M. Schubert, F. Teich, H. Puetter, K.Schierle-Arndt and J. Pastre, J. Mater. Chem. 16 (2005)626.
[21]A.R. Millward and O.M. Yaghi, J. Am. Chem. Soc.127 (2005) 17998.
[22]M. Zeng, Y.Tan, Y. He, Z. Yin, Q. Chen and M. Kurmoo,Inorg. Chem. 52 (2013) 2353.
[23]S.S. Kaye, A. Dailly, O.M. Yaghi and J.R. Long, J. Am.Chem. Soc. 129 (2007) 14176.
[24]L. Huang, H. Wang, J. Chen, Z. Wang, J. Sun, D. Zhao and Y. Yan, Microporous Mesoporous Mater. 58 (2003) 105.
[25]E. S. Boes 1, P. R. Livotto and H. Stassen, Chem. Phys.331 (2006) 142.

Effects of Washing and Drying on Crystal Structure and Pore Size Distribution (PSD) of Zn₄O₁₃C₂₄H₁₂ Framework (IRMOF-1)

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Jin-Wen Zou, Xiao-Feng Wang, Jie Yang, Chuan-Bo Ji, Xu-Qing Wang, Xian-Qiang Fan, Zhi-Peng Guo. Characterization of Interfacial Bonding Mechanism for Graphene-Modified Powder Metallurgy Nickle-Based Superalloy [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(7): 753-760.
[2]	Can Huang, Jian Tu, Yu-Ren Wen, Zhi Hu, Zhi-Ming Zhou, An-Ping Dong, Guo-Liang Zhu. Microstructural Characterization of Pure Titanium Treated by Laser Surface Treatment Under Different Processing Parameters [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(3): 321-328.
[3]	Ajit Mishra. Performance of Corrosion-Resistant Alloys in Concentrated Acids [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(4): 306-318.
[4]	Qi-Xiang Fan, Jiao-Jiao Zhang, Zheng-Huan Wu, Yan-Mei Liu, Tao Zhang, Bing Yan, Tie-Gang Wang. Influence of Al Content on the Microstructure and Properties of the CrAlN Coatings Deposited by Arc Ion Plating [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(12): 1221-1230.
[5]	G. Ravi, CH. Sudhakar Reddy, K. Sreenu, Ravinder Guje, Radha Velchuri, M. Vithal. Degradation of Methylene Blue and Rhodamine B Using a New Visible Light-Responsive Photocatalyst, KSb₂PO_8-_x N _y [J]. Acta Metallurgica Sinica (English Letters), 2016, 29(4): 335-343.
[6]	Peng-Yu Lin,Zhi-Hui Zhang,Shu-Hua Kong,Hong Zhou,Yunhong Liang,Xin Tong,Lu-Quan Ren. Mechanical Properties of Vermicular Graphite Cast Iron Processed by Selective Laser Surface Alloying with Ultra-fine ZrO₂ Ceramic Particulates [J]. Acta Metallurgica Sinica (English Letters), 2016, 29(11): 985-992.
[7]	Yun-Long Xue, Shuang-Ming Li, Hong Zhong, Lai-Ping Li, Heng-Zhi Fu. Microstructure Characterization and Fracture Toughness of Laves Phase-Based Cr-Nb-Ti Alloys [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(4): 514-520.
[8]	Suresh Palla, Ravinder Guje, G. Ravi, Radha Velchuri, M. Vithal. Enhanced Photocatalytic Activity of N-doped Li₂VPO₆ Under Visible Light Irradiation [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(2): 216-222.
[9]	Antonio Piccininni, Gabriella Di Michele, Gianfranco Palumbo, Donato Sorgente, Luigi Tricarico. Improving the Hydromechanical Deep-Drawing Process Using Aluminum Tailored Heat Treated Blanks [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(12): 1482-1489.
[10]	Rico Haase, Roland Mü, ller, Dirk Landgrebe, Peter Scholz, Matthias Riemer. Process Design for Hybrid Sheet Metal Components [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(12): 1518-1524.
[11]	Shuang Shao, Yong Liu, Chun-Shui Xu, Ying-Xuan Xu, Bin Wu, Xiao-Shu Zeng, Xian-Feng Lu, Xiang-Jie Yang. Effects of Cooling Rate and Component on the Microstructure and Mechanical Properties of Mg-Zn-Y Alloys [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(1): 7-14.
[12]	R. Sridhar, K. Devendranath Ramkumar, N. Arivazhagan. Characterization of Microstructure, Strength, and Toughness of Dissimilar Weldments of Inconel 625 and Duplex Stainless Steel SAF 2205 [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(6): 1018-1030.
[13]	Gurunathan Baskar, Bathrinarayanan Pranav Vasanthi, Muthukumarasamy Vasanth Kumar, Thangavelu Dilliganesh. Characterization of Intracellular Gold Nanoparticles Synthesized by Biomass of Aspergillus terreus [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(4): 569-572.
[14]	Mondal Biplob, Dutta Lachit, Roychaudhury Chirosree, Mohanta Dambarudhar, Mukherjee Nillohit, Saha Hiranmay. Effect of Annealing Temperature on the Morphology and Sensitivity of the Zinc Oxide Nanorods-Based Methane Senor [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(4): 593-600.
[15]	Lü Junxia, Yang Wuxiong, Wu Shikai, Zhao Xudong, Xiao Rongshi. Microstructure and Mechanical Properties of Galvanized Steel/AA6061 Joints by Laser Fusion Brazing Welding [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(4): 670-676.