Mesoscale simulation of discontinuous dynamic recrystallization using the cellular automaton method

doi:10.11890/1006-7191-114-287

Abstract

Abstract: A dynamic recrystallization (DRX) cellular automaton (CA) model that can mark the microstructure with DRX circle was developed. The effects of initial grain size on the stress-strain curve, mean grain size and DRX fraction were mainly investigated, and the simulated results were compared with those obtained from previous researches. The results show that the shape of the stress-strain curve is sensitive, while the stress and mean grain size at the steady state are insensitive to the initial grain size. The transition from a multiple-peak stress-strain curve to a single-peak one can be explained by variations in DRX circle fraction, and the initial grain size to make this transition is between 70 and 80 μm.

Key words: Dynamic recrystallization, Cellular automaton, DRX circle, Copper

Baojun YU, Xiaojun GUAN,Lijun WANG, Qingkai ZENG, Qianqian LIU, Yu CAO. Mesoscale simulation of discontinuous dynamic recrystallization using the cellular automaton method[J]. Acta Metallurgica Sinica (English Letters), 2011, 24(4): 287-294.

References

[1] F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena (Second Edition) (Elsevier Ltd, Oxford, 2004) p.428.

[2] A.D. Rollett, M.J. Luton and D.J. Srolovitz, Acta Metall Mater 40(1) (1992) 43.

[3] P. Peczak and M.J. Luton, Acta Metall Mater 41(1) (1993) 59.

[4] P. Peczak, Acta Metall Mater 43(3) (1995)1279.

[5] M.M. Tong, C.L. Mo, D.Z. Li and Y.Y. Li, Acta Metall Sin 38(7) (2002) 745 (in Chinese).

[6] T. Takaki, T. Hirouchi, Y. Hisakuni, A. Yamanaka and Y.Tomita, Mater Trans 49(11) (2008) 2559.

[7] T. Takaki, Y. Hisakuni, T. Hirouchi, A. Yamanaka and Y.Tomita, Comput Mater Sci 45(4) (2009) 881.

[8] R.L. Goetz and V. Seetharaman, Scr Mater 38(3) (1998) 405.

[9] R. Ding and Z.X. Guo, Acta Mater 49(16) (2001)3163.

[10] J.W. Zhao, H. Ding, W.J. Zhao, F.R. Cao, H.L. Hou and Z.Q. Li, Acta Metall Sin (Engl Lett) 21(4) (2008) 260.

[11] Y. Lu, L.W. Zhang, X.H. Deng, J.B. Pei, S. Wang and G.L.Zhang, Acta Metall Sin 44(3) (2008) 292 (in Chinese).

[12] N.M. Xiao, C.W. Zheng, D.Z. Li and Y.Y. Li, Comput Mater Sci 41(3) (2008) 366.

[13] F. Chen, Z.S. Cui, J. Liu, W. Chen and S.J. Chen, Mater Sci Eng A 527(21-22) (2010) 5539.

[14] H. Hallberg, M. Wallin and M. Ristinmaa, Comput Mater Sci 49(1) (2010) 25.

[15] S.Q. Huang, Y.P. Yi and C. Liu, J Cent South Univ Technol 16(1) (2009) 18.

[16] D. Raabe, Annu Rev Mater Res 32 (2002) 53.

[17] W. Roberts and B. Ahlblom, Acta Metall 26(5) (1978) 801.

[18] K. Janssens, D. Raabe, E. Kozeschnik, M. Miodownik and B.Nestler, Computational Materials Engineering (Elsevier Academic Press, Burlington, 2007) p.117.

[19] G. Kugler and R. Turk, Acta Mater 52(15) (2004) 4659.

[20] X.F. Ma, X.J Guan, Y.T. Liu, X.M. Shen, L.J. Wang, S.T.Song and Q.K. Zeng, Chin J Nonferrous Met 18(1) (2008)138.

[21] L. Blaz, T. Sakai and J.J. Jonas, Met Sci 17(12) (1983) 609.

[22] B. Derby, Scr Metall Mater 27(11) (1992) 1581.

[23] Y.M. Wang, M.Y Li and G. Wei, Controlled Rolling and Controlled Cooling of Steels (Metallurgical Industry Press, Beijing, 1995) p.21 (in Chinese).

[24] T. Sakai, J Mater Process Technol 53(1-2) (1995) 349.

[25] J. Kroc, LNCS 2329 (2002) 773.