Acta Metallurgica Sinica (English Letters) ›› 2018, Vol. 31 ›› Issue (5): 449-455.DOI: 10.1007/s40195-017-0651-y
Special Issue: 2018年钢铁材料专辑
• Orginal Article • Next Articles
Li-Na Wang1,2, Ping Yang1(), Ting Jin1, Wei-Min Mao1
Received:
2017-07-12
Revised:
2017-08-21
Online:
2018-05-20
Published:
2018-05-02
Li-Na Wang, Ping Yang, Ting Jin, Wei-Min Mao. Different Mechanisms of ε-M and α′-M Variant Selection and the Influencing Factors of ε-M Reversion During Dynamic Tension in TRIP Steel[J]. Acta Metallurgica Sinica (English Letters), 2018, 31(5): 449-455.
Add to citation manager EndNote|Ris|BibTeX
Fig. 2 Orientation maps and pole figures of grain A (a deviated 〈111〉γ grain) during tension at a strain rate of 1600 s-1(TD-tensile direction): a orientation map I (gray color—γ, red color—ε-M, blue color—α′-M), b orientation map II (gray color—γ, red color—ε-M, Euler angles—α′-M), c pole figures of γ, ε-M, and α′-M
Fig. 4 Orientation maps and pole figures of grain B during tension at strain rate of 1.2 × 103 s-1 (TD-tensile direction): a orientation map I (gray color—γ, red color—ε-M, blue color—α′-M), b orientation map II (Euler angles color—γ, gray color—ε-M, blue color—α′-M), c orientation map III (gray color—γ, Euler angles color—ε-M, blue color—α′-M, red line—\(\langle 11\bar{2}0\rangle\)86° misorientation), d pole figure of γ, e pole figure of ε-M
Fig. 6 Orientation maps and pole figures of grains C and D during tension at a strain rate of 1.6 × 103 s-1(TD-tensile direction): a orientation map I of grain C (Euler angles color-γ, red color-ε-M, blue color-α′-M), b orientation map II of grain C (gray color-γ, Euler angles color-ε-M, blue color-α′-M, red line-\(\langle 11\bar{2}0\rangle\)86° misorientation), c orientation map I of grain D (gray color-γ, red color-ε-M, blue color-α′-M), d Orientation map II of grain D (gray color-γ, Euler angles color-ε-M, blue color-α′-M), e pole figures of γ and ε-M in grain C, f pole figures of γ and ε-M in grain D
|
[1] | Bang Dou, Hui Zhang, Jia-Hao Zhu, Ben-Qi Xu, Zi-Yi Zhou, Ji-Li Wu. Uniformly Dispersed Carbide Reinforcements in the Medium-Entropy High-Speed Steel Coatings by Wide-Band Laser Cladding [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1145-1150. |
[2] | Pengfei Gao, Weijian Chen, Feng Li, Beijia Ning, Zhengzhi Zhao. Quasi-Situ Characterization of Deformation in Low-Carbon Steel with Equiaxed and Lamellar Microstructure Treated by the Quenching and Partitioning Process [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1657-1665. |
[3] | Zhiying Zheng, Linjiang Chai, Kang Xiang, Weijiu Huang, Yongfeng Wang, Liangliang Liu, Lin Tian. Typical Microstructural Characteristics of Ti-5Al-5Mo-5V-3Cr-1Fe Metastable β Ti Alloy Forged in α+β Region [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1601-1608. |
[4] | Qiang Yang, Shu-Hui Lv, Fan-Zhi Meng, Kai Guan, Bai-Shun Li, Xu-Hu Zhang, Jing-Qi Zhang, Xiao-Juan Liu, Jian Meng. Detailed Structures and Formation Mechanisms of Well-Known Al10RE2Mn7 Phase in Die-Cast Mg-4Al-4RE-0.3Mn Alloy [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(2): 178-186. |
[5] | Zhong-Yuan Feng, Xin-Jie Di, Shi-Pin Wu, Dong-Po Wang, Xiao-Qian Liu. Comparison of Microstructure and Residual Stress Between TIG and MAG Welding Using Low Transformation Temperature Welding Filler [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(3): 263-272. |
[6] | Wen-Sheng Xu, Xiao-Peng Yang, Wen-Zheng Zhang. Interpretation of the Habit Plane of δ Precipitates in Superalloy Inconel 718 [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(2): 113-126. |
[7] | Xiao-Lin Pan, Minoru Umemoto. Precipitation Characteristics and Mechanism of Vanadium Carbides in a V-Microalloyed Medium-Carbon Steel [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(11): 1197-1206. |
[8] | Hai-Yan Yang, Jing Li, Ping Yang. The Change of Orientation Relationships Between Austenite and α′-Martensite During Deformation in High Manganese TRIP Steel [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(3): 289-294. |
[9] | Xi-Feng Li, Wei Ding, Jian Cao, Li-Yan Ye, Jun Chen. In Situ TEM Observation on Martensitic Transformation during Tensile Deformation of SUS304 Metastable Austenitic Stainless Steel [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(3): 302-306. |
[10] | Xi-Li Lu, De-Xi Su, Feng Chen, Wei-Li Liu, Yang-Guang Shi, Yun-Xiang Tong, Li Li. Martensitic Transformation and Its Thermal Cycling Stability in Ni56Mn21Cu4Ga19 High-Temperature Shape Memory Ribbon [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(2): 243-248. |
[11] | Anna Churakova, Dmitry Gunderov, Alexander Lukyanov, Niklas Nollmann. Transformation of the TiNi Alloy Microstructure and the Mechanical Properties Caused by Repeated B2-B19′ Martensitic Transformations [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(10): 1230-1237. |
[12] | Ke Zhang, Ping Liu, Wei Li, Zheng-Hong Guo, Yong-Hua Rong. High Strength-Ductility Nb-microalloyed Low Martensitic Carbon Steel: Novel Process and Mechanism [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(10): 1264-1271. |
[13] | Wang Lingshui, Shen Jun, Xiong Yilong, Du Yujun, Fu Hengzhi. Phase and Microstructure Selection During Directional Solidification of Peritectic Alloy Under Convection Condition [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(4): 585-592. |
[14] | Xinli Wang, Wenbin Dai, Rui Wang, Xinzhong Tian, Xiang Zhao, Jianming Li. A Method to Distinguish Twinning Variants and Second Twins by EBSD Measurements [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(2): 267-271. |
[15] | Mustafa Türkmen,Süleyman Gündüz. Bake-Hardening Response of High Martensite Dual-Phase Steel with Different Morphologies and Volume Fractions [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(2): 279-289. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||