Acta Metallurgica Sinica (English Letters) ›› 2015, Vol. 28 ›› Issue (3): 289-294.DOI: 10.1007/s40195-014-0195-3
• Orginal Article • Previous Articles Next Articles
Hai-Yan Yang, Jing Li, Ping Yang()
Received:
2014-06-24
Revised:
2014-07-21
Online:
2015-01-08
Published:
2015-07-23
Hai-Yan Yang, Jing Li, Ping Yang. The Change of Orientation Relationships Between Austenite and α′-Martensite During Deformation in High Manganese TRIP Steel[J]. Acta Metallurgica Sinica (English Letters), 2015, 28(3): 289-294.
Add to citation manager EndNote|Ris|BibTeX
Orientation relationship | Deviation |
---|---|
K-S | <1 1 6> 40.35°-45.35° |
N-W | <1 0 5> 43.48°-48.48° |
G-T | <3 2 16> 41.73°-46.73° |
Table 1 The value ranges of three kinds of ORs investigated in this work
Orientation relationship | Deviation |
---|---|
K-S | <1 1 6> 40.35°-45.35° |
N-W | <1 0 5> 43.48°-48.48° |
G-T | <3 2 16> 41.73°-46.73° |
Fig. 2 Statistic results of the orientation relationships between the austenite and thermal α′-M: a, b distribution of misorientation angle before and after deformation; c, d rotation axis of the three ORs mentioned above before and after deformation; e, f ORs before and after deformation; g, h distribution of rotation axis showed in stereographic projection triangle before and after deformation
Fig. 3 Statistic results of the orientation relationships between the austenite and deformation-induced α′-M: a distribution of misorientation angle; b rotation axis of the three terms mentioned above; c orientation relationship; d distribution of rotation axis showed in stereographic projection triangle
Fig. 4 EBSD orientation maps and the orientations of the austenitic grains and α′-M variants: a orientation map of α′-M before deformation (colors α′-M variants, gray austenite and ε-M); b magnifying orientation map of the region inside square in a (colors austenite with twin relationship, gray α′-M and ε-M); c orientation map of α′-M and austenite (orange and light purple austenite (the same as b), other (colors α′-M, gray ε-M); d the inverse pole figure for the TA direction of austenitic grains investigated in this study; e, f the inverse pole figure of α′-M variants with N-W relationship and K-S relationship, respectively
[1] | C.Y. Choi, I. Kim, Y. Kim, Y. Park,Korean J. Metal Mater. 50, 136(2012) |
[2] | O. Bouaziz, H. Zurob, M. Huang,Steel Res. Int. 84, 937(2013) |
[3] | N. Takayama, G. Miyamoto, T. Furuhara,Acta Mater. 60, 2387(2012) |
[4] | Y. He, S. Godet, P.J. Jacques, J.J. Jonas,Acta Mater. 54, 1323(2006) |
[5] | S. Zaefferer, J. Ohlert, W. Bleck,Acta Mater. 52, 2765(2004) |
[6] | S. Morito, H. Tanaka, R. Konishi, T. Furuhara, T. Maki,Acta Mater. 51, 1789(2003) |
[7] | Y. Zhang, Y. Zhao, F.C. Zhang,Adv. Mater. Res. 479, 601(2012) |
[8] | H. Kitahara, R. Ueji, M. Ueda, N. Tsuji, Y. Minamino,Mater. Charact. 54, 378(2005) |
[9] | C. Wang, W. Cao, J. Shi, C. Huang, H. Dong, Mater. Sci. Eng. A 562, 89 (2013) |
[10] | K. Verbeken, L. Barbe, D. Raabe,ISIJ Int. 49, 1601(2009) |
[11] | B. Verlinden, P. Bocher, E. Girault, E. Aernoudt, Scr. Mater. 45, 909(2001) |
[12] | S. Martin, S. Richter, A. Poklad, H. Berek, S. Decker, U. Martin, L. Krüger, D. Rafaja, J. Alloys Compd. 577, S578(2013) |
[13] | X.M. Zhang, E. Gautier, A. Simon,Acta Metall. 37, 487(1989) |
[14] | H. Guo, X. Gao, Y. Bai, M. Enomoto, S. Yang, X. He,Mater. Charact. 67, 34(2012) |
[15] | G. Nolze,Cryst. Res. Technol. 41, 72(2006) |
[16] | B.J. Lin,Acta Metall. Sin. 18, 350(1982). (in Chinese) |
[1] | Zhiying Zheng, Linjiang Chai, Kang Xiang, Weijiu Huang, Yongfeng Wang, Liangliang Liu, Lin Tian. Typical Microstructural Characteristics of Ti-5Al-5Mo-5V-3Cr-1Fe Metastable β Ti Alloy Forged in α+β Region [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1601-1608. |
[2] | Pengfei Gao, Weijian Chen, Feng Li, Beijia Ning, Zhengzhi Zhao. Quasi-Situ Characterization of Deformation in Low-Carbon Steel with Equiaxed and Lamellar Microstructure Treated by the Quenching and Partitioning Process [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1657-1665. |
[3] | Qiang Yang, Shu-Hui Lv, Fan-Zhi Meng, Kai Guan, Bai-Shun Li, Xu-Hu Zhang, Jing-Qi Zhang, Xiao-Juan Liu, Jian Meng. Detailed Structures and Formation Mechanisms of Well-Known Al10RE2Mn7 Phase in Die-Cast Mg-4Al-4RE-0.3Mn Alloy [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(2): 178-186. |
[4] | Li-Na Wang, Ping Yang, Ting Jin, Wei-Min Mao. Different Mechanisms of ε-M and α′-M Variant Selection and the Influencing Factors of ε-M Reversion During Dynamic Tension in TRIP Steel [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(5): 449-455. |
[5] | Zhong-Yuan Feng, Xin-Jie Di, Shi-Pin Wu, Dong-Po Wang, Xiao-Qian Liu. Comparison of Microstructure and Residual Stress Between TIG and MAG Welding Using Low Transformation Temperature Welding Filler [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(3): 263-272. |
[6] | Wen-Sheng Xu, Xiao-Peng Yang, Wen-Zheng Zhang. Interpretation of the Habit Plane of δ Precipitates in Superalloy Inconel 718 [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(2): 113-126. |
[7] | Xiao-Lin Pan, Minoru Umemoto. Precipitation Characteristics and Mechanism of Vanadium Carbides in a V-Microalloyed Medium-Carbon Steel [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(11): 1197-1206. |
[8] | Xi-Feng Li, Wei Ding, Jian Cao, Li-Yan Ye, Jun Chen. In Situ TEM Observation on Martensitic Transformation during Tensile Deformation of SUS304 Metastable Austenitic Stainless Steel [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(3): 302-306. |
[9] | Xi-Li Lu, De-Xi Su, Feng Chen, Wei-Li Liu, Yang-Guang Shi, Yun-Xiang Tong, Li Li. Martensitic Transformation and Its Thermal Cycling Stability in Ni56Mn21Cu4Ga19 High-Temperature Shape Memory Ribbon [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(2): 243-248. |
[10] | Anna Churakova, Dmitry Gunderov, Alexander Lukyanov, Niklas Nollmann. Transformation of the TiNi Alloy Microstructure and the Mechanical Properties Caused by Repeated B2-B19′ Martensitic Transformations [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(10): 1230-1237. |
[11] | Ke Zhang, Ping Liu, Wei Li, Zheng-Hong Guo, Yong-Hua Rong. High Strength-Ductility Nb-microalloyed Low Martensitic Carbon Steel: Novel Process and Mechanism [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(10): 1264-1271. |
[12] | Xinli Wang, Wenbin Dai, Rui Wang, Xinzhong Tian, Xiang Zhao, Jianming Li. A Method to Distinguish Twinning Variants and Second Twins by EBSD Measurements [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(2): 267-271. |
[13] | Mustafa Türkmen,Süleyman Gündüz. Bake-Hardening Response of High Martensite Dual-Phase Steel with Different Morphologies and Volume Fractions [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(2): 279-289. |
[14] | Haitao Si, Renlong Xiong, Fan Song, Yuhua Wen,Huabei Peng. Wear Resistance of Austenitic Steel Fe–17Mn–6Si–0.3C with High Silicon and High Manganese [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(2): 352-358. |
[15] | Zhonggang SUN, Guoqing CHEN, Xuesong FU, Yaoqi WANG, Hongliang HOU,Wenlong ZHOU. TEM investigations on hydrogen induced phasetransformation in Ti-6Al-4V alloys [J]. Acta Metallurgica Sinica (English Letters), 2010, 23(5): 357-362. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||