Acta Metallurgica Sinica (English Letters) ›› 2015, Vol. 28 ›› Issue (12): 1510-1517.DOI: 10.1007/s40195-015-0351-4
• Article • Previous Articles Next Articles
Neng-Yong Ye, Ming Cheng(), Shi-Hong Zhang
Received:
2015-06-25
Revised:
2015-11-04
Online:
2015-12-11
Published:
2015-12-15
Neng-Yong Ye, Ming Cheng, Shi-Hong Zhang. Effect of Cold Rolling Parameters on the Longitudinal Residual Stress Distribution of GH4169 Alloy Sheet[J]. Acta Metallurgica Sinica (English Letters), 2015, 28(12): 1510-1517.
Add to citation manager EndNote|Ris|BibTeX
C | Cr | Ni | Mo | Al | Nb | Ti | Si | P | S | Fe |
---|---|---|---|---|---|---|---|---|---|---|
0.07 | 18.94 | 52.4 | 2.97 | 0.49 | 5.04 | 1.02 | 0.08 | 0.005 | 0.001 | Bal. |
Table 1 Chemical compositions of GH4169 alloy sheet (in wt%)
C | Cr | Ni | Mo | Al | Nb | Ti | Si | P | S | Fe |
---|---|---|---|---|---|---|---|---|---|---|
0.07 | 18.94 | 52.4 | 2.97 | 0.49 | 5.04 | 1.02 | 0.08 | 0.005 | 0.001 | Bal. |
Rolling reduction (%) | Friction coefficient | Rolling velocity (m/s) | Initial stress | Roller diameter (mm) |
---|---|---|---|---|
10, 30, 50 | 0.1 | 0.11 | Na | |
10 | 0.1, 0.3, 0.5 | 0.11 | Na | |
10 | 0.1 | 0.07, 0.11, 0.14 | Na | 350 |
10 | 0.1 | 0.11 | With |
Table 2 Cold rolling parameters
Rolling reduction (%) | Friction coefficient | Rolling velocity (m/s) | Initial stress | Roller diameter (mm) |
---|---|---|---|---|
10, 30, 50 | 0.1 | 0.11 | Na | |
10 | 0.1, 0.3, 0.5 | 0.11 | Na | |
10 | 0.1 | 0.07, 0.11, 0.14 | Na | 350 |
10 | 0.1 | 0.11 | With |
Fig. 3 Longitudinal stress σ11 changes in GH4169 alloy sheet (ε=10%): a longitudinal stress σ11 changes during the cold rolling; b residual stress distribution after the cold rolling
Fig. 4 Influence of rolling reduction on the longitudinal stress and distribution of residual stress: a changes in longitudinal stress on the surface; b distribution of residual stress along the thickness direction
Fig. 6 Influence of rolling velocity on the longitudinal stress and distribution of residual stress: a changes in longitudinal stress on the surface; b distribution of residual stress over the thickness
Fig. 7 Influence of friction coefficient on the longitudinal stress and distribution of residual stress: a changes in longitudinal stress on the surface; b distribution of residual stress over the thickness
Fig. 8 Longitudinal stress σ11 distributions of GH4169 alloy sheet: a longitudinal stress distribution during cold rolling (μ=0.5); b longitudinal residual stress distribution after cold rolling (μ=0.5)
Fig. 10 Influence of initial stress on the longitudinal stress and distribution of residual stress: a changes in longitudinal stress on the surface; b distribution of residual stress over the thickness
[1] | B. Geddes, H. Leon, X. Huang, OH, 2010) |
[2] | Q.A. Tai, H. Guan, Z.X. Guo, S.L. Li, Z.Q. Chen, W. Wang, J. Iron Steel Res. 23(S2), 174(2009). (in Chinese) |
[3] | W. Zhuang, Q. Liu, R. Djugum, P.K. Sharp, A. Pardowsha, Appl. Surf. Sci. 320, 558(2014) |
[4] | H. Zuo, Y. Feng, Acta Mech. Solid Sin. 25, 100(2012) |
[5] | M.N. James, M. Newby, D.G. Hattingh, A. Steuwer, Procedia Eng. 2, 441(2010) |
[6] | W.F. He, Y.H. Li, W. Li, Y.Q. Li, Q.P. Li, J. Aerosp. Power 26, 1551 (2011). (in Chinese) |
[7] | X.D. Wang, Q.P. Li, X. Zhou, C.L. Tong, Y.J. Hu, China Surf. Eng. 2012(02), 75(2012). (in Chinese) |
[8] | Y.K. Zhang, J.Z. Lu, X.D. Ren, H.B. Yao, H.X. Yao, Mater. Des. 30, 1697(2009) |
[9] | L. Shi, D.S. Wei, Y.R. Wang, J. Aerosp. Power 28, 1236 (2013). (in Chinese) |
[10] | Y.R. Wang, H.B. Li, S.H. Yuan, D.S. Wei, L. Shi, J. Aerosp. Power 28, 1208 (2013). (in Chinese) |
[11] | M. Beghini, L. Bertini, B.D. Monelli, C. Santus, M. Bandini, Surf. Coat. Technol. 254, 175(2014) |
[12] | L.L. Zhao, Y.D. Zhang, Nonferr. Met. 57, 27(2005) |
[13] | B. Li, Q.D. Zhang, X.F. Zhang, J. Plast. Eng. 20(5), 65(2013). (in Chinese) |
[14] | H.M. Mao, Inner Mongolia University of Science and Technology, 2010 (in Chinese) |
[15] | L. Zheng, L.C. Che, J. Zhang, P.C. Zhang, C.G. He, Z.K. Peng, Y. Xiao, X.H. Feng, L. Zhu, J. Netshape Form. Eng. 6(5), 50(2014). (in Chinese) |
[16] | L. Zheng, J. Zhang, C.G. He, Z.K. Peng, Z.H. Gao, J.L. Mou, J. Netshape Form. Eng. 3(2), 25(2011). (in Chinese) |
[1] | Meng Yan, Cong Wang, Tianjiao Luo, Yingju Li, Xiaohui Feng, Qiuyan Huang, Yuansheng Yang. Effect of Pulsed Magnetic Field on the Residual Stress of Rolled Magnium Alloy AZ31 Sheet [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(1): 45-53. |
[2] | Xiaohui Shi, Zuhan Cao, Zhiyuan Fan, Junwei Qiao. Texture Evolution Behavior and Its Triggered Mechanical Anisotropy of CP Ti During Severe Cold Rolling and Subsequent Annealing [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1271-1282. |
[3] | Siqi Xiang, Xinfang Zhang. Residual Stress Removal Under Pulsed Electric Current [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(2): 281-289. |
[4] | Han Zheng, Liming Fu, Xinbo Ji, Ziyong Li, Yanle Sun, Sixin Zhao, Wei Wang, Aidang Shan. Granular Carbides-Assisted Ultrafine-Ferrite Fabrication in the Pearlitic Steel Without Severe Plastic Deformation and Annealing [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1645-1656. |
[5] | Wen-Chao Dong, Dian-Bao Gao, Shan-Ping Lu. Numerical Investigation on Residual Stresses of the Safe-End/Nozzle Dissimilar Metal Welded Joint in CAP1400 Nuclear Power Plants [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(5): 618-628. |
[6] | Huseyin Zengin, Yunus Turen, Muhammet Emre Turan, Fatih Ayd?n. Evolution of Microstructure, Residual Stress, and Tensile Properties of Mg-Zn-Y-La-Zr Magnesium Alloy Processed by Extrusion [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(11): 1309-1319. |
[7] | Lin Jiang, Liang Zhang, Zhi-Quan Liu. Optimal Design of Co/In/Cu Sputtering Target Assembly Using Finite Element Method and Taguchi Method [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(11): 1407-1414. |
[8] | Li Xiang, Xiao-Hua Min, Xin Ji, Satoshi Emura, Cong-Qian Cheng, Koichi Tsuchiya. Effect of Pre-cold Rolling-Induced Twins and Subsequent Precipitated ω-Phase on Mechanical Properties in a β-Type Ti-Mo Alloy [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(6): 604-614. |
[9] | Zhong-Yuan Feng, Xin-Jie Di, Shi-Pin Wu, Dong-Po Wang, Xiao-Qian Liu. Comparison of Microstructure and Residual Stress Between TIG and MAG Welding Using Low Transformation Temperature Welding Filler [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(3): 263-272. |
[10] | Z.G. Liu, T.I. Wong, W. Huang, N. Sridhar, S.J. Wang. Effect of Surface Polishing Treatment on the Fatigue Performance of Shot-Peened Ti-6Al-4V Alloy [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(7): 630-640. |
[11] | Ye-Jun Zhu, Wen-Feng Ding, Ze-Yu Zhao, Yu-Can Fu, Hong-Hua Su. Compressive Strength and Interface Microstructure of PCBN Grains Brazed with High-Frequency Induction Heating Method [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(7): 641-649. |
[12] | Wenbo Zhao, T.Warren Liao, Lampros Kompotiatis. Stress and Springback Analyses of API X70 Pipeline Steel Under 3-Roller Bending via Finite Element Method [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(5): 470-482. |
[13] | Sheng-Sheng Zhao,Yan-Hui Zhao,Lv-Sha Cheng,Vladimir Viktorovich Denisov,Nikolay Nikolaevich Koval,Bao-Hai Yu,Hai-Juan Mei. Effects of Substrate Pulse Bias Duty Cycle on the Microstructure and Mechanical Properties of Ti-Cu-N Films Deposited by Magnetic Field-Enhanced Arc Ion Plating [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(2): 176-184. |
[14] | Xin Zhang, Qing-Suo Liu, Xian-Shun Zeng, Jie-He Sui, Wei Cai, Ai-Lian Liu. Effect of Annealing Temperature on the Shape Memory Properties of Cold-Rolled Dual-Phase Ni-Mn-Ga-Gd Alloy [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(11): 1403-1406. |
[15] | Ye Zuoyan, Liu Daoxin, Li Chongyang, Zhang Xiaoming, Yang Zhi, Lei Mingxia. Effect of Shot Peening and Plasma Electrolytic Oxidation on the Intergranular Corrosion Behavior of 7A85 Aluminum Alloy [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(4): 705-713. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||