FRACTAL DIMENSION OF SHAPE CHANGE OF CAVITIFS DURING SUPERPLASTIC DEFORMATION IN HIGH STRENGTH Al ALLOY

Abstract

Abstract: The fractal dimension changes of cavities have been determined during superplastic deformation of the high strength aluminiurn alloy 7475 with different strain,temperature, strain rate and grain size.The fractal dimension of cavities may increase with the increase of strain.It becomes higher as the alloy deformed under lower temperatures,greater strain rate and coarser grain size.The alloy would be approaching to rupture if the fractal dimension of cavities raised to a certain extent.

Key words: fractal dimension, superplastic deformation, cavity, Al alloy

JIANG Xinggang CUI Jianzhong MA Longxiang Northeast University of Technology,Shenyang,China. FRACTAL DIMENSION OF SHAPE CHANGE OF CAVITIFS DURING SUPERPLASTIC DEFORMATION IN HIGH STRENGTH Al ALLOY[J]. Acta Metallurgica Sinica (English Letters), 1991, 4(7): 55-58.

[1]	Li-Mei Liu, Yu-Xiang Lai, Chun-Hui Liu, Jiang-Hua Chen. Optimized Combinatorial Properties of an AlMgSi(Cu) Alloy Achieved by a Mechanical-Thermal Combinatorial Process [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(5): 751-758.
[2]	U. K. Tarai, P. S. Robi, Sukhomay Pal. Thermal Properties of Ni-Cr-Si-B-Fe Based Interlayer Material and Its Application in TLP Bonding of IN 718 Superalloy [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1666-1680.
[3]	Liang Yang, Jun Li, Defang Tu, Joel C. J. Strickland, Qiaodan Hu, Hongbiao Dong, Jianguo Li. Reduced Annealing Time and Enhanced Magnetocaloric Effect of La(Fe, Al)₁₃ Alloy by La-nonstoichiometry and Si-doping [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(11): 1535-1542.
[4]	Haoqiang Zhang, Xixi Niu, Zhiliang Pei, Nanlin Shi, Jun Gong, Chao Sun. Effects of Cr and Al Contents on the Preparation of SiC Fiber-Reinforced NiCrAl Alloy Matrix Composite [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(10): 1416-1422.
[5]	Manoj Kumar Pathak, Amit Joshi, K. K. S. Mer, R. Jayaganthan. Mechanical Properties and Microstructural Evolution of Bulk UFG Al 2014 Alloy Processed Through Cryorolling and Warm Rolling [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(7): 845-856.
[6]	Krzysztof Siemek, Mirosław Kulik, Marat Eseev, Mirosław Wróbel, Andrey Kobets, Oleg Orlov, Alexey Sidorin. Surface and Subsurface Defects Studies of Dental Alloys Exposed to Sandblasting [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(10): 1181-1194.
[7]	J. Esquivel, R. K. Gupta. Corrosion Behavior and Hardness of Al-M (M: Mo, Si, Ti, Cr) Alloys [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(4): 333-341.
[8]	Chuan-Xi Ren, Qiang Wang, Zhen-Jun Zhang, Yan-Kun Zhu, Zhe-Feng Zhang. A Novel Method for Achieving Gradient Microstructure in a Cu-Al Alloy: Surface Spinning Strengthening (3S) [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(3): 212-217.
[9]	Ruo-Shan Lei, Ming-Pu Wang. Effect of Milling Tools on the Microstructure and Property of Cu-Based Composites Prepared by Mechanical Alloying [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(12): 1155-1162.
[10]	Ye-Gao Chen,Yi Zhong,Jiang-Cheng Yin,Li-Qiang Wang,Li-Na Liu,Huan Yang,Ying-Li Liu. Microstructure and Properties of 7075Al Alloy Fabricated by Directly Combined of Spray Forming and Continuous Extrusion Forming under Different Atomization Gas Pressures [J]. Acta Metallurgica Sinica (English Letters), 2016, 29(9): 804-812.
[11]	Tan He,Rui Hu,Tie-Bang Zhang,Jin-Shan Li. Effect of Nb Content on Solidification Characteristics and Microsegregation in Cast Ti-48Al-xNb Alloys [J]. Acta Metallurgica Sinica (English Letters), 2016, 29(8): 714-721.
[12]	Arash Fattah-Alhosseini, Mojtaba Vakili-Azghandi, Mohsen K. Keshavarz. Influence of Concentrations of KOH and Na₂SiO₃ Electrolytes on the Electrochemical Behavior of Ceramic Coatings on 6061 Al Alloy Processed by Plasma Electrolytic Oxidation [J]. Acta Metallurgica Sinica (English Letters), 2016, 29(3): 274-281.
[13]	Sayyed Erfan Aghili,Mohammad Hossein Enayati,Fathallah Karimzadeh. Fabrication of Bulk (Fe,Cr)₃Al/Al₂O₃ Intermetallic Matrix Nanocomposite Through Mechanical Alloying and Sintering [J]. Acta Metallurgica Sinica (English Letters), 2016, 29(10): 911-919.
[14]	Alvaro Torres, Sergio Serna, Cristobal Pati, o, Gerardo Rosas. Corrosion Behavior of Ψ and β Quasicrystalline Al-Cu-Fe Alloy [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(9): 1117-1122.
[15]	Mohammad Hossein Enayati, Fathallah Karimzadeh, Soheil Sabooni, Majid Jafari. Phase Stability in Mechanically Alloyed Mg-Ni System Studied by Experiments and Thermodynamic Calculations [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(8): 1002-1007.

FRACTAL DIMENSION OF SHAPE CHANGE OF CAVITIFS DURING SUPERPLASTIC DEFORMATION IN HIGH STRENGTH Al ALLOY

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments