Fracture behavior of 304 stainless steel coatings by cold gas dynamic spray

doi:10.11890/1006-7191-113-249

Acta Metallurgica Sinica (English Letters) ›› 2011, Vol. 24 ›› Issue (3): 249-254.DOI: 10.11890/1006-7191-113-249

Fracture behavior of 304 stainless steel coatings by cold gas dynamic spray

,Wei HAN¹, Xianming MENG¹, Jie ZHAO¹, Junbao ZHANG²

1. School of Materials Science and Engineering, Dalian University of Technology, Dalian 116085, China
2. Baosteel Research Institute, Baoshan Iron & Steel Co.,Ltd., Shanghai 201900, China

Received:2010-12-01 Revised:2011-02-22 Online:2011-06-25 Published:2011-06-13
Contact: Jie ZHAO

Abstract

Abstract: 304 stainless steel coating was deposited on the Interstitial-Free steel substrate by cold gas dynamic spraying (CGDS). Three-point bending test of the cold sprayed 304 stainless steel coating was tested by SHIMADZU electro-hydraulic servo-controlled fatigue testing machine and the fracture morphology was examined by scanning electron microscopy. The results showed that the fracture behavior of the cold sprayed 304 stainless steel coating was brittleness fracture. The crack in the coating occurred in the interfaces between particles and the crack extended to the internal of the coating with the increase of the load. When the crack has extended to the combination interface between coating and substrate, the crack extended to the two sides. The microstructure and mechanical property of the cold sprayed 304 stainless steel coating have been optimized after heat treatment.

Key words: Cold gas dynamic spraying, 304 stainless steel coating, Three-point bending test, Fracture behavior, Heat treatment

Wei HAN, Xianming MENG, Jie ZHAO, Junbao ZHANG. Fracture behavior of 304 stainless steel coatings by cold gas dynamic spray[J]. Acta Metallurgica Sinica (English Letters), 2011, 24(3): 249-254.

[1]	Xi Zhao, Fa-Fa Yan, Zhi-Min Zhang, Peng-Cheng Gao, Shu-Chang Li. Influence of Heat Treatment on Precipitation Behavior and Mechanical Properties of Extruded AZ80 Magnesium Alloy [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(1): 54-64.
[2]	Yuan Yu, Peiying Shi, Kai Feng, Jiongjie Liu, Jun Cheng, Zhuhui Qiao, Jun Yang, Jinshan Li, Weimin Liu. Effects of Ti and Cu on the Microstructure Evolution of AlCoCrFeNi High-Entropy Alloy During Heat Treatment [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1077-1090.
[3]	Guang-Da Sun, Li Zhou, Ren-Xiao Zhang, Ling-Yun Luo, Hao Xu, Hong-Yun Zhao, Ning Guo, Di Zhang. Effect of Sleeve Plunge Depth on Interface/Mechanical Characteristics in Refill Friction Stir Spot Welded Joint [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(4): 551-560.
[4]	Wen-Chao Dong, Ming-Yue Wen, Hui-Yong Pang, Shan-Ping Lu. Effect of Post-weld Tempering on the Microstructure and Mechanical Properties in the Simulated HAZs of a High-Strength-High-Toughness Combination Marine Engineering Steel [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(3): 391-402.
[5]	Guercio Giuseppe Del, Manuela Galati, Abdollah Saboori, Paolo Fino, Luca Iuliano. Microstructure and Mechanical Performance of Ti-6Al-4V Lattice Structures Manufactured via Electron Beam Melting (EBM): A Review [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(2): 183-203.
[6]	Song-Wei Wang, Hong-Wu Song, Yan Chen, Shi-Hong Zhang, Hai-Hong Li. Evolution of Annealing Twins and Recrystallization Texture in Thin-Walled Copper Tube During Heat Treatment [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1618-1626.
[7]	Liang Yang, Jun Li, Defang Tu, Joel C. J. Strickland, Qiaodan Hu, Hongbiao Dong, Jianguo Li. Reduced Annealing Time and Enhanced Magnetocaloric Effect of La(Fe, Al)₁₃ Alloy by La-nonstoichiometry and Si-doping [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(11): 1535-1542.
[8]	Pei-Lin Zhang, Yu-Hong Zhao, Ruo-Peng Lu, Zhi-Bing Ding, Hua Hou. Microalloying Effect of Sn on Phase Transformation During Heat Treatment in Mg-Y-Zn-Zr Alloys [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(5): 550-558.
[9]	Xiang-Wei Li, Li Wang, Xin-Gang Liu, Yao Wang, Jia-Sheng Dong, Lang-Hong Lou. Effect of Aging Heat Treatment on the Microstructure and Creep Properties of the Cast Ni-Based Superalloy at Low Temperature [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(5): 651-658.
[10]	Huan Liu, He Huang, Jia-Peng Sun, Ce Wang, Jing Bai, Ai-Bin Ma, Xian-Hua Chen. Microstructure and Mechanical Properties of Mg-RE-TM Cast Alloys Containing Long Period Stacking Ordered Phases: A Review [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(3): 269-285.
[11]	Jia-Hui Dong, Li-Li Tan, Yi-Bin Ren, Ke Yang. Effect of Microstructure on Corrosion Behavior of Mg-Sr Alloy in Hank’s Solution [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(3): 305-320.
[12]	Liu Liu, Jie Meng, Jin-Lai Liu, Hai-Feng Zhang, Xu-Dong Sun, Yi-Zhou Zhou. Effects of Crystal Orientations on the Low-Cycle Fatigue of a Single-Crystal Nickel-Based Superalloy at 980 °C [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(3): 381-390.
[13]	Tao Liu, Mei Yang, Jun-Song Wang, Jia-Sheng Dong, Li Wang, Lang-Hong Lou. Effect of Heat Treatment on Microstructure and Stress Rupture Properties of a Ni-Mo-Cr-Fe Base Corrosion-Resistant Superalloy [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(1): 116-126.
[14]	En-Yang Liu, Si-Rong Yu, Ming Yuan, Fan-Guo Li, Yan Zhao, Wei Xiong. Effects of Semi-solid Isothermal Heat Treatment on Microstructures and Damping Capacities of Fly Ash Cenosphere/AZ91D Composites [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(9): 953-962.
[15]	H. Y. Liu, G. Wang, Y. Hong, D. C. Zeng. Effect of Heat Treatment Time on Dy-Cu Alloy Diffusion Process in Dy-Containing Commercial Nd-Fe-B Sintered Magnets [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(5): 496-502.

Fracture behavior of 304 stainless steel coatings by cold gas dynamic spray

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments