Acta Metallurgica Sinica (English Letters) ›› 2024, Vol. 37 ›› Issue (3): 391-400.DOI: 10.1007/s40195-023-01601-z
Previous Articles Next Articles
Zhiyuan Liu, Li Jin(), Jian Zeng, Fulin Wang, Fenghua Wang, Shuai Dong, Jie Dong
Received:
2023-03-03
Revised:
2023-05-25
Accepted:
2023-06-19
Online:
2024-03-10
Published:
2023-10-07
Contact:
Li Jin, Zhiyuan Liu, Li Jin, Jian Zeng, Fulin Wang, Fenghua Wang, Shuai Dong, Jie Dong. A Review on Particle Reinforced Mg Matrix Composites Fabricated by Powder Metallurgy[J]. Acta Metallurgica Sinica (English Letters), 2024, 37(3): 391-400.
Add to citation manager EndNote|Ris|BibTeX
Reinforcements | Density (g/cm3) | Elastic modulus (GPa) | Melting point (℃) | Thermal expansion coefficient (10-6 K-1) | Thermal conductivity (W·m-1·K-1) |
---|---|---|---|---|---|
SiC | 3.12 | 480 | 2300 | 4.8 | 59 |
TiC | 4.93 | 320 | 3062 | 7.4 | 29 |
B4C | 2.52 | 450 | 2400 | 4.5 | 29 |
TiB2 | 4.52 | 560 | 2900 | 7.7 | 27 |
Al2O3 | 3.98 | 370 | 2000 | 8.3 | 25 |
CNTs | 2.10 | 1100 | 3600 | - | 5000 |
Table 1 Physical properties of the common reinforcements
Reinforcements | Density (g/cm3) | Elastic modulus (GPa) | Melting point (℃) | Thermal expansion coefficient (10-6 K-1) | Thermal conductivity (W·m-1·K-1) |
---|---|---|---|---|---|
SiC | 3.12 | 480 | 2300 | 4.8 | 59 |
TiC | 4.93 | 320 | 3062 | 7.4 | 29 |
B4C | 2.52 | 450 | 2400 | 4.5 | 29 |
TiB2 | 4.52 | 560 | 2900 | 7.7 | 27 |
Al2O3 | 3.98 | 370 | 2000 | 8.3 | 25 |
CNTs | 2.10 | 1100 | 3600 | - | 5000 |
Fig. 1 TEM micrographs of extruded Mg-10 vol.% SiCnp (M10Sn): a uniform distribution of SiCnp in Mg matrix corresponding to the EDS spectra of marked circles, b dark field showing dynamic recrystallisation (DRXed) grains, c high-resolution transmission electron microscopy (HRTEM) of interface between SiCnp, Mg matrix, d statistical grain size distribution [60]
Fig. 5 Scheme of the preparation process of the CNT-Al2O3/Mg composite: a in situ synthesis of CNT-Al2O3 synergistic reinforcements by CCVD, b the obtained urchin-like CNT-Al2O3 synergistic reinforcements, c preparation of CNT-Al2O3/Mg mixed powders, d preparation of the bulk CNT-Al2O3/Mg composite by cold pressing, e preparation of the final CNT-Al2O3/Mg composite by sintering and hot extrusion [84]
Fig. 8 a Morphologies of the SiCp and raw Mg powders. b Morphologies and sectional observations of the composite powders revealing a core-shell structure forming after milling for 20 h and a homogeneous structure forming after milling for 40 h. c Microstructure of the bulk composites fabricated from the core-shell structured and homogeneous powders [90]
[1] | Y. Ali, D. Qiu, B. Jiang, F. Pan, M.X. Zhang, J. Alloys Compd. 619, 639 (2015) |
[2] | N. Chawla, Y.L. Shen, Adv. Eng. Mater. 3, 357 (2001) |
[3] | G.K. Meenashisundaram, M. Gupta, JOM 68, 1890 (2016) |
[4] | F. Pan, M. Yang, X. Chen, J. Mater. Sci. Technol. 32, 1211 (2016) |
[5] | S.C. Tjong, Adv. Eng. Mater. 9, 639 (2007) |
[6] | J. Shen, W. Yin, Q. Wei, Y. Li, J. Liu, L. An, J. Mater. Res. 28, 1835 (2013) |
[7] | S.F. Hassan, M. Gupta, Mater. Res. Bull. 37, 377 (2002) |
[8] | P. Poddar, V.C. Srivastava, P.K. De, K.L. Sahoo, Mater. Sci. Eng. A 460-461, 357 (2007) |
[9] | A. Kumar, S. Kumar, N.K. Mukhopadhyay, J. Magnes. Alloys 6, 245 (2018) |
[10] | R. Rahmany-Gorji, A. Alizadeh, H. Jafari, Mater. Sci. Eng. A 674, 413 (2016) |
[11] | Y. Yao, L. Chen, J. Mater. Sci. Technol. 30, 661 (2014) |
[12] | B. Anasori, E.A.N. Caspi, M.W. Barsoum, Mater. Sci. Eng. A 618, 511 (2014) |
[13] | D.H. Cho, J.H. Nam, B.W. Lee, S.O. Yim, I.M. Park, Met. Mater. Int. 22, 332 (2016) |
[14] | G. Xiong, Y. Nie, D. Ji, J. Li, C. Li, W. Li, Y. Zhu, H. Luo, Y. Wan, Curr. Appl. Phys. 16, 830 (2016) |
[15] | H.Y. Wang, Q.C. Jiang, Y. Wang, B.X. Ma, F. Zhao, Mater. Lett. 58, 3509 (2004) |
[16] | K.S. Tun, M. Gupta, Compos. Sci. Technol. 67, 2657 (2007) |
[17] | S.C. Tjong, Z.Y. Ma, Mater. Sci. Eng. R 29, 49 (2000) |
[18] | M. Gupta, W.L.E. Wong, Mater. Charact. 105, 30 (2015) |
[19] | C.S. Goh, J. Wei, L.C. Lee, M. Gupta, Acta Mater. 55, 5115 (2007) |
[20] | K.B. Nie, X.J. Wang, K. Wu, X.S. Hu, M.Y. Zheng, L. Xu, Mater. Sci. Eng. A 528, 8709 (2011) |
[21] | X.J. Wang, N.Z. Wang, L.Y. Wang, X.S. Hu, K. Wu, Y.Q. Wang, Y.D. Huang, Mater. Des. 57, 638 (2014) |
[22] | C.S. Goh, J. Wei, L.C. Lee, M. Gupta, Nanotechnology 17, 7 (2006) |
[23] | M. Rashad, F. Pan, A. Tang, M. Asif, S. Hussain, J. Gou, J. Mao, J. Ind. Eng. Chem. 23, 243 (2015) |
[24] | D.M. Lee, B.K. Suh, B.G. Kim, J.S. Lee, C.H. Lee, Mater. Sci. Technol. 13, 590 (1997) |
[25] | M. Rashad, F. Pan, H. Hu, M. Asif, S. Hussain, J. She, Mater. Sci. Eng. A 630, 36 (2015) |
[26] | D.J. Lloyd, Acta Metall. Mater. 39, 59 (1991) |
[27] | A. Slipenyuk, V. Kuprin, Y. Milman, V. Goncharuk, J. Eckert, Acta Mater. 54, 157 (2006) |
[28] | Y. Sahin, Wear 258, 1717 (2005) |
[29] | H.M. Zakaria, Ain Shams Eng. J. 5, 831 (2014) |
[30] | J. Lan, Y. Yang, X. Li, Mater. Sci. Eng. A 386, 284 (2004) |
[31] | W.L.E. Wong, M. Gupta, Adv. Eng. Mater. 7, 250 (2005) |
[32] | S. Aravindan, P.V. Rao, K. Ponappa, J. Magnes. Alloys 3, 52 (2015) |
[33] | S.F. Hassan, M. Gupta, Mater. Sci. Technol. 20, 1383 (2004) |
[34] | D. De Cicco, F. Taheri, J. Magnes. Alloys 7, 227 (2019) |
[35] | M. Wang, Y. Zhao, L.D. Wang, Y.P. Zhu, X.J. Wang, J. Sheng, Z.Y. Yang, H.L. Shi, Z.D. Shi, W.D. Fei, Carbon 139, 954 (2018) |
[36] | H. Uozumi, K. Kobayashi, K. Nakanishi, T. Matsunaga, K. Shinozaki, H. Sakamoto, T. Tsukada, C. Masuda, M. Yoshida, Mater. Sci. Eng. A 495, 282 (2008) |
[37] | Y. Park, K. Cho, I. Park, Y. Park, Proc. Eng. 10, 1446 (2011) |
[38] | M. Zheng, K. Wu, C. Yao, Mater. Sci. Eng. A 318, 50 (2001) |
[39] | A. Luo, Metall. Mater. Trans. A 26, 2445 (1995) |
[40] | M.H. Nai, J. Wei, M. Gupta, Mater. Des. 60, 490 (2014) |
[41] | S. Tiwari, R. Balasubramaniam, M. Gupta, Corros. Sci. 49, 711 (2007) |
[42] | Y. Cai, M.J. Tan, G.J. Shen, H.Q. Su, Mater. Sci. Eng. A 282, 232 (2000) |
[43] | Y. Cai, D. Taplin, M.J. Tan, W. Zhou, Scr. Mater. 41, 967 (1999) |
[44] | Q.C. Jiang, X.L. Li, H.Y. Wang, Scr. Mater. 48, 713 (2003) |
[45] | G. Anbuchezhiyan, B. Mohan, S. Kathiresan, R. Pugazenthi, Mater. Today Proc. 27, 1530 (2020) |
[46] | H.Y. Wang, Q.C. Jiang, X.L. Li, J.G. Wang, Scr. Mater. 48, 1349 (2003) |
[47] | C. Badini, F. Marino, M. Montorsi, X.B. Guo, Mater. Sci. Eng. A 157, 53 (1992) |
[48] | Y. Sun, E. Cevik, Y. Turen, H. Ahlatci, M.E. Turan, F. Aydin, H. Zengin, J. Compos. Mater. 55, 3881 (2021) |
[49] | Y. Behnamian, D. Serate, E. Aghaie, R. Zahiri, Z. Tolentino, H. Niazi, A. Mostafaei, Tribol. Int. 165, 107299 (2022) |
[50] | C.D. Li, X.J. Wang, K. Wu, W.Q. Liu, S.L. Xiang, C. Ding, X.S. Hu, M.Y. Zheng, J. Alloys Compd. 612, 330 (2014) |
[51] | Q. Li, A. Viereckl, C.A. Rottmair, R.F. Singer, Compos. Sci. Technol. 69, 1193 (2009) |
[52] | W.L.E. Wong, M. Gupta, Adv. Eng. Mater. 8, 735 (2006) |
[53] | S. Ugandhar, M. Gupta, S.K. Sinha, Compos. Struct. 72, 266 (2006) |
[54] | P. Rodrigo, M. Campo, B. Torres, M.D. Escalera, E. Otero, J. Rams, Appl. Surf. Sci. 255, 9174 (2009) |
[55] | Q. Chen, G. Chen, F. Han, X. Xia, Y. Wu, Metall. Mater. Trans. A 48, 3497 (2017) |
[56] | W. N.A.W. Muhammad, Z. Sajuri, Y. Mutoh, Y. Miyashita, J. Alloys Compd. 509, 6021 (2011) |
[57] | D. Luo, C.H. Pei, J. Rong, H.Y. Wang, Q. Li, Q.C. Jiang, Powder Metall. 58, 349 (2016) |
[58] | G. Garcés, P. Pérez, P. Adeva, Scr. Mater. 52, 615 (2005) |
[59] | G. Garcés, M. Rodríguez, P. Pérez, P. Adeva, Mater. Sci. Eng. A 527, 6511 (2010) |
[60] | D. Penther, A. Ghasemi, R. Riedel, C. Fleck, S. Kamrani, Mater. Sci. Eng. A 738, 264 (2018) |
[61] | K.B. Nie, X.J. Wang, L. Xu, K. Wu, X.S. Hu, M.Y. Zheng, J. Alloys Compd. 512, 355 (2012) |
[62] | X. Wang, W. Liu, X. Hu, K. Wu, Mater. Sci. Eng. A 715, 49 (2018) |
[63] | K. Kaviyarasan, R. Soundararajan, P. Seenuvasaperumal, A. Sathish kumar, J. Pradheep kumar, Mater. Today Proc. 18, 4082 (2019) |
[64] | P. Abachi, A. Masoudi, K. Purazrang, Mater. Sci. Eng. A 435-436, 653 (2006) |
[65] | L. Falcon-Franco, E. Bedolla-Becerril, J. Lemus-Ruiz, J.G. Gonzalez-Rodríguez, R. Guardian, I. Rosales, Compos. Pt. B Eng. 42, 275 (2011) |
[66] | D. Mehra, M.M. Mahapatra, S.P. Harsha, J. Magnes. Alloys 6, 100 (2018) |
[67] | F. Aydin, Y. Sun, M. Emre Turan, J. Compos. Mater. 54, 141 (2019) |
[68] | N.V. Ponraj, A. Azhagurajan, S.C. Vettivel, Alex. Eng. J. 55, 2077 (2016) |
[69] | P. Narayanasamy, N. Selvakumar, P. Balasundar, Mater. Today Proc. 5, 6570 (2018) |
[70] | P. Narayanasamy, N. Selvakumar, P. Balasundar, Trans. Indian Inst. Met. 68, 911 (2015) |
[71] | N. Selvakumar, P. Narayanasamy, Tribol. Trans. 59, 733 (2016) |
[72] | V. Kevorkijan, S. Davor Škapin, Mater. Manuf. Process. 24, 1337 (2009) |
[73] | S.M. Banijamali, Y. Palizdar, K.A. Nekouee, S. Najafi, M. Shariat Razavi,Proc. Inst. Mech. Eng. Pt. L-J. Mater. 236, 1854 (2022) |
[74] | M. Navaneetha Krishnan, S. Suresh, S.C. Vettivel, J. Alloys Compd. 747, 324 (2018) |
[75] | S. Suresh, M.N. Krishnan, S.C. Vettivel, J. Magnes. Alloys 10, 1381 (2022) |
[76] | Q.C. Jiang, H.Y. Wang, B.X. Ma, Y. Wang, F. Zhao, J. Alloys Compd. 386, 177 (2005) |
[77] | M.K. Habibi, A.S. Hamouda, M. Gupta, J. Alloys Compd. 550, 83 (2013) |
[78] | E. Ghasali, M. Alizadeh, M. Niazmand, T. Ebadzadeh, J. Alloys Compd. 697, 200 (2017) |
[79] | Y. Ding, J. Xu, J. Hu, Q. Gao, X. Guo, R. Zhang, L. An, Mater. Sci. Eng. A 771, 138575 (2020) |
[80] | J. Thornby, A. Harris, A. Bird, B. Beake, V.B. Manakari, M. Gupta, M. Haghshenas, Mater. Sci. Eng. A 801, 140418 (2021) |
[81] | Y. Say, O. Guler, B. Dikici, Mater. Sci. Eng. A 798, 139636 (2020) |
[82] | S.K. Thakur, G.T. Kwee, M. Gupta, J. Mater. Sci. 42, 10040 (2007) |
[83] | K. Kondoh, H. Fukuda, J. Umeda, H. Imai, B. Fugetsu, M. Endo, Mater. Sci. Eng. A 527, 4103 (2010) |
[84] | H. Li, L. Cheng, X. Sun, Y. Li, B. Li, C. Liang, H. Wang, J. Fan, J. Alloys Compd. 746, 320 (2018) |
[85] | H. Zhang, P. Shen, A. Shaga, R. Guo, Q. Jiang, Mater. Lett. 183, 299 (2016) |
[86] | X. Sun, R.F. Guo, A. Shaga, Z.J. Hu, P. Shen, Z.Q. Zhang, Q.C. Jiang, Carbon 162, 382 (2020) |
[87] | Y. Xiang, X. Wang, X. Hu, L. Meng, Z. Song, X. Li, Z. Sun, Q. Zhang, K. Wu, Compos. Pt. A 119, 225 (2019) |
[88] | M.K. Habibi, S.P. Joshi, M. Gupta, Acta Mater. 58, 6104 (2010) |
[89] | L. Fan, M. Zhou, Y. Zhang, H. Dieringa, X. Qian, Y. Zeng, X. Lu, Y. Huang, G. Quan, Mater. Sci. Eng. A 867, 144344 (2023) |
[90] | X. Luo, K. Zhao, X. He, Y. Bai, V. De Andrade, M. Zaiser, L. An, J. Liu, Acta Mater. 228, 117730 (2022) |
[1] | Yuhao Chen, Kaibo Nie, Kunkun Deng, Zhilong Liu, Quanxin Shi. Ameliorating the Strength-Modulus Synergy in GNPs Reinforced Mg-Zn-Zr Composites via Multidirectional Forging and Hot Extrusion Deformation [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(3): 425-437. |
[2] | Jing-Peng Xiong, Yi-Qi Zeng, Jin-Long Liu, Wei-Cheng Wang, Lan Luo, Yong Liu. Interface Design Strategy for GNS/AZ91 Composites with Semi-Coherent Structure [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(3): 467-483. |
[3] | Lu Xiao, Ting-Ting Liu, Yue Chu, Bo Song, Jie Zhao, Xian-Hua Chen, Kai-Hong Zheng, Fu-Sheng Pan. Effect of Ti Particles on the Microstructure and Mechanical Properties of AZ91 Magnesium Matrix Composites [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(3): 513-524. |
[4] | Jin-Kai Zhang, Cui-Ju Wang, Yi-Dan Fan, Chao Xu, Kai-Bo Nie, Kun-Kun Deng. Effect of Tip Content on the Work Hardening and Softening Behavior of Mg-Zn-Ca Alloy [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(3): 551-560. |
[5] | Peitang Zhao, Xuejian Li, Hailong Shi, Xiaoshi Hu, Chunlei Zhang, Chao Xu, Xiaojun Wang. Fabrication, Microstructure and Mechanical Properties of in situ GNPs Reinforced Magnesium Matrix Composites [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(3): 561-569. |
[6] | Dongmei Pu, Xianhua Chen, Jingfeng Wang, Jun Tan, Jianbo Li, Hong Yang, Bo Feng, Kaihong Zheng, Fusheng Pan. Aging Behavior of As-Extruded Ti Particles Reinforced VW94 Composites [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(3): 401-406. |
[7] | Yan Wen, Xuan Sun, Jian Zhou, Bingliang Liu, Haojie Guo, Yuxin Li, Fei Yin, Liqiang Wang, Lechun Xie, Lin Hua. Influence of Electroshocking Treatment on Microstructure and Mechanical Properties of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Thin-Wall Specimen Manufactured by Laser Melting Deposition [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(1): 145-158. |
[8] | Huan Yang, Ying Liu, Jianbo Jin, Kunmao Li, Junjie Yang, Lingjian Meng, Chunbo Li, Wencai Zhang, Shengfeng Zhou. Effect of Heat Treatment on Microstructure and Mechanical Behavior of Cu-Bearing 316L Stainless Steel Produced by Selective Laser Melting [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(1): 169-180. |
[9] | Xuan Luo, Chao Yang, Dongdong Li, Lai-Chang Zhang. Laser Powder Bed Fusion of Beta-Type Titanium Alloys for Biomedical Application: A Review [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(1): 17-28. |
[10] | Xinxing Xiong, Sijie Yu, Pei Wang, Junfang Qi, Haichao Li, Xulei Wang, Michael Ryan, Debajyoti Bhaduri. Effect of TiB2 Addition on Microstructure and Mechanical Properties of AA8009 Alloy Fabricated by Laser Additive Manufacturing [J]. Acta Metallurgica Sinica (English Letters), 2024, 37(1): 67-77. |
[11] | Jia-Qi Zheng, Ming-Liang Wang, Wen-Na Jiao, Long-Jiang Zou, Yan Di. Effect of Ti Addition on Microstructure Evolution and Mechanical Properties of Al18Co13Cr10Fe14Ni45 Eutectic High-Entropy Alloys [J]. Acta Metallurgica Sinica (English Letters), 2023, 36(9): 1493-1501. |
[12] | Xiao-Yang Yi, Wei Liu, Yun-Fei Wang, Bo-Wen Huang, Xin-Jian Cao, Kui-Shan Sun, Xiao Liu, Xiang-Long Meng, Zhi-Yong Gao, Hai-Zhen Wang. Effect of Sn Content on the Microstructural Features, Martensitic Transformation and Mechanical Properties in Ti-V-Al-Based Shape Memory Alloys [J]. Acta Metallurgica Sinica (English Letters), 2023, 36(8): 1247-1260. |
[13] | Wenhe Li, Wenshuang Gu, Yuqiu Chen, Jun Gong, Zhiliang Pei, Chao Sun. Microstructure, Mechanical, and Tribological Properties of Amorphous WB2/Ti Multilayer Coatings [J]. Acta Metallurgica Sinica (English Letters), 2023, 36(8): 1385-1396. |
[14] | Yue-Yang Gu, Han-Yu Zhao, Wei Chen, Wei Yan, Liang-Yin Xiong, De-Min Chen. Effects of Hydrogen Charging on Mechanical Properties of CLAM Steel at Different Strain Rates [J]. Acta Metallurgica Sinica (English Letters), 2023, 36(7): 1203-1210. |
[15] | Yuxing Zhang, Zhen Wang, Shuchang Li, Xi Zhao, Zhimin Zhang, Yaojin Wu, Xianwei Ren, Fafa Yan, Beibei Dong. High Strength and Excellent Ductility of AZ80 Magnesium Alloy Cabin Component Developed by W-Shaped Channel Extrusion and Subsequent T6 Heat Treatment [J]. Acta Metallurgica Sinica (English Letters), 2023, 36(5): 839-856. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||