Electro-Optics and Band Gap Energies of Nanosilver-Coated TiO2 Nanotubes on Titanium Metal

doi:10.1007/s40195-017-0664-6

Abstract

Abstract:

TiO₂ nanotubes on Ti metal surface were prepared by the electrochemical anodization method. Then, nanosilver was deposited onto the nanotubes by the electroless dip coating and the anodization. The obtained TiO₂ nanotubes were examined by using scanning electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, cyclic voltammetry, and UV-Vis. The electrochemical band gap (E _g ^CV ) of the nanosilver-coated TiO₂ nanotubes prepared by the anodization was found as 1.54 eV. Using the UV-Vis measurements, the optical band gap energy (E _g ^op. ) was calculated as 1.51 eV for the Ag/TiO₂ nanotubes obtained by electroless dip coating. The electrical conductivity of the TiO₂nanotubes also increased from 3.0 × 10^-4 to 34.7 S/cm after nano Ag deposition by the anodization method. These Ag/TiO₂ nanotubes with low band gap and high electrical conductivity are desirable for the applications in electronics, Li-ion batteries, and solar cells.

Key words: Electrochemical anodization, TiO₂ nanotubes, Nano Ag deposition, Band gap energy, Electrical conductivity

U?ursoy Olgun, Mustafa Gülfen, Fatih üstel, Hale Arslan. Electro-Optics and Band Gap Energies of Nanosilver-Coated TiO₂ Nanotubes on Titanium Metal[J]. Acta Metallurgica Sinica (English Letters), 2018, 31(2): 153-163.

Figures/Tables 12

Fig. 1 Nano Ag coating methods of TiO2 nanotube surfaces: a dip coating during the anodization of Ti, b electroless dip coating after the anodization of Ti

Fig. 2 SEM images of TiO2, Ag/TiO2 nanotubes

Fig. 3 EDS spectra of nano Ag/TiO2 nanotube surfaces

Fig. 4 Elemental mappings of Ag and Ti on nano Ag/TiO2 nanotube surfaces

Fig. 5 AFM surface images of TiO2, Ag/TiO2 nanotubes

Fig. 6 XRD patterns of TiO2 and Ag/TiO2 nanotubes

Fig. 7 FT-IR spectra of Ti, TiO2, Ag/TiO2 nanotubes

Fig. 8 CV voltammograms of Ti metal (a LiClO4, b KNO3), TiO2 nanotubes (c LiClO4, d KNO3), nano Ag/TiO2 nanotubes (e LiClO4, f KNO3)

Fig. 9 CV voltammograms of TiO2 nanotubes (a 100 mV/s, b 25 mV/s), nano Ag/TiO2 nanotubes (c electroless dip coating, 100 mV/s, d electroless dip coating, 25 mV/s, e dip coating during anodization, 100 mV/s, f dip coating during anodization, 25 mV/s) in 0.1 M KNO3 electrolyte

Table 1 Electrochemical band gap energies

Energy	TiO₂ nanotubes	Nano Ag/TiO₂ nanotubes (anodization dip coating)	Nano Ag/TiO₂ nanotubes (electroless dip coating)
E _HOMO (eV)	- 6.36	- 4.89	- 5.59
E _LUMO (eV)	- 3.34	- 3.34	- 3.22
E _g ^cv (eV)	3.02	1.54	2.37

Fig. 10 UV-Vis spectra of Ti metal, TiO2 nanotubes, nano Ag/TiO2 nanotubes

Fig. 11 Electrical conductivities of TiO2, Ag/TiO2 nanotubes

References

[1]	H. An, B. Zhu, J. Li, J. Zhou, S. Wang, S. Zhang, S. Wu, W. Huang, J. Phys. Chem. C 112, 18772 (2008)
[2]	I. Paramasivam, J.M. Macak, A. Ghicov, P. Schmuki, Chem. Phys. Lett. 445(4), 233(2007)
[3]	V.K. Mahajan, M. Misra, K.S. Raja, S.K. Mohapatra, J. Phys. D-Appl. Phys. 41, 125307(2008)
[4]	D.P. Macwan, P.N. Dave, S. Chaturvedi, J. Mater. Sci. 46, 3669(2011)
[5]	T. Dikici, S. Yildirim, M. Yurddaskal, M. Erol, R. Yigit, M. Toparli, E. Celik, Surf. Coat. Technol. 263, 1(2015)
[6]	P. Roy, S. Berger, P. Schmuki, Angew. Chem. Int. Ed. 50, 2904(2011)
[7]	Y.C. Liang, C.C. Wang, C.C. Kei, Y.C. Hsueh, W.H. Cho, T.P. Perng, J. Phys. Chem. C 115, 9498 (2011)
[8]	J. Yu, G. Dai, B. Cheng, J. Phys. Chem. C 114, 19378 (2010)
[9]	C.A. Grimes, G.K. Mor, TiO 2 Nanotube Arrays: Synthesis, Properties and Applications (Springer, New York, 2009)
[10]	J.M. Macak, H. Tsuchiya, P. Schmuki, Angew. Chem. Int. Ed. 44, 2100 (2005)
[11]	J.M. Macak, H. Tsuchiya, L. Taveira, S. Aldabergerova, P. Smooth, Angew. Chem. Int. Ed. 44, 7463(2005)
[12]	I. Paramasivam, J.M. Macak, P. Schmuki, Electrochem. Commun. 10, 71(2008)
[13]	X. Zhang, R. Hang, H. Wu, X. Huang, Y. Ma, N. Lin, X. Yao, L. Tian, B. Tang, Surf. Coat. Technol. 235, 748(2013)
[14]	U. Olgun, A.C.S.Appl, Mater. Interfaces 2, 28 (2009)
[15]	U. Olgun, K. Tunc, V. ?zaslan, Polym. Adv. Technol. 222, 232(2011)
[16]	D. Fang, K. Huang, S. Liu, Z. Li, J. Alloys Compd. 464, L5(2008)
[17]	H. Li, X. Duan, G. Liu, X. Liu, J. Mater. Sci. 43, 1669(2008)
[18]	X. He, Y. Cai, H. Zhang, C. Liang, J. Mater. Chem. 21, 475(2010)
[19]	A. Roguska, M. Pisarek, M. Andrzejczuk, M. Lewandowska, K.J. Kurzydlowski, M.J.Janik-Czachor, Biomed. Mater. Res. A 100, 1954 (2012)
[20]	Y. Ling, Y. Zhuo, L. Huang, D. Mao, Appl. Surf. Sci. 388, 169(2016)
[21]	S.T. Nishanthi, S. Iyyapushpam, B. Sundarakannan, E. Subramanian, D.P. Padiyan, J. Power Sources 274, 885 (2015)
[22]	Y.C. Yao, X.R. Dai, X.Y. Hu, S.Z. Huang, Z. Jin, Appl. Surf. Sci. 387, 469(2016)
[23]	B. Barrocas, C.D. Nunes, M.L. Carvalho, O.C. Monteiro, Appl. Surf. Sci. 385, 18(2016)
[24]	P.V. Viet, B.T. Phan, C.M. Thi, L.V. Hieu, J. Nanosci. Nanotechnol. 17, 1497(2017)
[25]	X. Wei, P.S. Nbelayim, G. Kawamura, H. Muto, A. Matsuda, Nanotechnology 28, 135207 (2017)
[26]	L. Sun, J. Li, C. Wang, S. Li, Y. Lai, H. Chen, C. Lin, J. Hazard. Mater. 171, 1045(2009)
[27]	A. Jostsons, A.S. Malin, Acta Crystallogr. B-Struct. 24, 211(1968)
[28]	K. Kadoi, N. Babcsan, H. Nakae, Mater. Trans. 50, 727(2009)
[29]	B. Ercan, K.M. Kummer, K.M. Tarquinio, T.J. Webster, Acta Biomater. 7, 3003(2011)
[30]	K. Gupta, R.P. Singh, A. Pandey, A. Pandey, Beilstein J.Nanotechnol. 4, 345(2013)
[31]	M. Mojiri-Foroushani, H. Dehghani, N. Salehi-Vanani, Electrochim. Acta 92, 315 (2013)
[32]	B.W.D’Andrade, S. Datta, S.R. Forrest, P. Djurovich, E. Polikarpov, M.E. Thompson, Org. Electron. 6, 11(2005)
[33]	U. Olgun, M. Gülfen, Dyes Pigments 99, 1004 (2013)
[34]	U. Olgun, M. Gülfen, React. Funct. Polym. 77, 23(2014)
[35]	U. Olgun, M. Gülfen, RSC Adv. 4, 25165(2014)
[36]	U. Olgun, M. Gülfen, RSC Adv. 5, 18710(2015)
[37]	S. Kurian, H. Seo, H. Jeon, J. Phys. Chem. C 117, 16811 (2013)
[38]	K.M. Reddy, S.V. Manorama, A.R. Reddy, Mater. Chem. Phys. 78, 239(2003)
[39]	P. Barone, F. Stranges, M. Barberio, D. Renzelli, A. Bonanno, F. Xu, J. Chem. 2014, 1(2014)

Electro-Optics and Band Gap Energies of Nanosilver-Coated TiO₂ Nanotubes on Titanium Metal

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 12

References

Related Articles 5

Recommended Articles

Metrics

Comments

[1]	Zhu Luo, Xian-Hua Chen, Kai Song, Chun-Quan Liu, Yan Dai, Di Zhao, Fu-Sheng Pan. Effect of Alloying Element on Electromagnetic Interference Shielding Effectiveness of Binary Magnesium Alloys [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(7): 817-824.
[2]	Osama Saber, Haifa Alomair, Mohamed Abu-Abdeen, Abdullah Aljaafari. Fast Degradation of Green Pollutants Through Nanonets and Nanofibers of the Al-Doped Zinc Oxide [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(5): 533-546.
[3]	Y. H. Zhu, C. M. Luk. Electropulsing-Induced Microstructural Changes and Their Effects on Electrical Conductivity of Thin Films of an Al-doped ZnO [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(12): 1361-1367.
[4]	Anees A. Ansari, Joselito P. Labis, Manawwer Alam, Shahid M. Ramay, Naushad Ahmad, Asif Mahmood. Synthesis, Structural and Optical Properties of Mn-Doped Ceria Nanoparticles: A Promising Catalytic Material [J]. Acta Metallurgica Sinica (English Letters), 2016, 29(3): 265-273.
[5]	M. Premovic, D. Minc, D. Manasijevic, Vladan Cosovic, D. Zivkovic, I. Dervisevic,N. Talijan. Mechanical and Electrical Properties of the Ternary Ag–Sb–Zn System [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(1): 47-54.