Acta Metallurgica Sinica (English Letters) ›› 2015, Vol. 28 ›› Issue (3): 307-315.DOI: 10.1007/s40195-014-0198-0

• Orginal Article • Previous Articles     Next Articles

Precipitation Behavior of Cu-1.9Be-0.3Ni-0.15Co Alloy During Aging

Yan-Chuan Tang1, Yong-Lin Kang1(), Li-Juan Yue2, Xiao-Liang Jiao2   

  1. 1 School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing, 100083, China
    2 CNMC Ningxia Orient Group Co., Ltd., Shizuishan, 753000, China
  • Received:2013-09-15 Revised:2014-07-21 Online:2015-01-20 Published:2015-07-23

Abstract:

In this paper, the evolutions of microstructure and mechanical properties of Cu-1.9Be-0.3Ni-0.15Co alloy were studied. The alloys in the condition of the solution treated (soft state) and 37% cold rolled (hard state) were aged at 320 °C for different time, respectively. The mechanical properties, electrical conductivity and microstructure of the alloy aged for different time were analyzed. Additionally, the precipitation kinetics of Cu-1.9Be-0.3Ni-0.15Co alloys was investigated. X-ray diffraction and transmission electron microscopy results reveal that both continuous precipitation and discontinuous precipitation existed in the hard-state Cu-1.9Be-0.3Ni-0.15Co alloy during the whole aging process; the sequence of continuous precipitation is G.P. zone → γ″ → γ′ → γ. Furthermore, the precipitation transformation mechanism of soft-state alloy is homogeneous nucleation, while hard-state alloy shows the heterogeneous nucleation (interface nucleation) with the nucleation rate of both states decaying rapidly to zero during aging at 320 °C.

Key words: Cu-1.9Be-0.3Ni-0.15Co alloy, Aging, Microstructure, Mechanical property, Electrical property, Precipitation kinetics