Acta Metallurgica Sinica (English Letters) ›› 2014, Vol. 27 ›› Issue (1): 63-74.DOI: 10.1007/s40195-014-0023-9
• research-article • Previous Articles Next Articles
Mingliang Wang, Peipeng Jin(), Jinhui Wang, Li Han, Chuang Cui
Received:
2013-05-27
Revised:
2013-10-12
Online:
2014-02-25
Published:
2014-03-11
Mingliang Wang, Peipeng Jin, Jinhui Wang, Li Han, Chuang Cui. Hot Deformation Behavior and Workability of (SiCp + Mg2B2O5w)/6061 Al Hybrid and SiCp/6061 Al Composites[J]. Acta Metallurgica Sinica (English Letters), 2014, 27(1): 63-74.
Add to citation manager EndNote|Ris|BibTeX
Fig. 1 Microstructures of as-cast composites: a W3P3 hybrid specimen at low magnification (the whiskers of large size showing by arrows); b P6 specimen at low magnification; c W3P3 hybrid specimen at high magnification (the whiskers of large size showing by arrows); d P6 specimen at high magnification
Fig. 2 Micrographs showing reinforcement/matrix interfaces in as-cast microstructures: a whisker/matrix interface bonding for W3P3 hybrid composite; b SiCp/matrix interface bonding for W3P3 hybrid composite; c SiCp/matrix interface bonding for P6 composite
Fig. 4 Corrected true stress–strain curves for W3P3 hybrid composite (dotted lines) and P6 composite (solid lines) at different strain rates at different temperatures: a 300 °C, b 350 °C, c 400 °C, d 450 °C
Fig. 9 Micrograph clearly showing whisker breakage and whisker/matrix interfacial debonding (showing by arrows) deformed at 300 °C/0.0001 s-1 for W3P3 hybrid composite
Fig. 11 Microstructures showing adiabatic shear bands or flow localization: a P6 composite deformed at 350 °C/0.1 s-1; b W3P3 hybrid composite deformed at 450 °C/0.1 s-1
Fig. 12 Micrographs showing reinforcement/matrix interfaces: a SiCp/matrix interface decohesion for P6 composite deformed at 350 °C/0.1 s-1; b whisker/matrix interface debonding for W3P3 hybrid composite deformed at 400 °C/0.1 s-1
Fig. 14 ln σ versus \( { \ln }\,\dot{\varepsilon } \) plots a and σ versus \( { \ln }\,\dot{\varepsilon } \) plots b at different temperatures for W3P3 hybrid composite
Fig. 15 ln σ versus \( { \ln }\,\dot{\varepsilon } \) plots a and σ versus \( { \ln }\,\dot{\varepsilon } \) plots b at different temperatures for P6 composite
Fig. 16 Variation of flow stress at the strain of 0.5 with strain rate at different test temperatures a and 1000/T versus ln (sinh (ασ)) plots at the strain of 0.5 at different strain rates for calculating activation energy for W3P3 hybrid composite b
Fig. 17 Variation of flow stress at the strain of 0.5 with strain rate at different test temperatures a and 1000/T versus ln (sinh (ασ)) plots at the strain of 0.5 at different strain rates for calculating activation energy for P6 composite b
[1] | D.P. Mondal, S. Das, K.S. Suresh, N. Ramakrishnan, Mater. Sci. Eng. A 460–461, 550(2007)10.1016/j.msea.2007.03.001 |
[2] | T.S. Srivatsan, M. Al-Hajri, C. Smith, M. Petraroli, Mater. Sci. Eng. A 346, 91(2003)10.1016/S0921-5093(02)00481-1 |
[3] | B. Inem, Mater. Sci. Eng. A 197, 91(1995)10.1016/0921-5093(94)09753-4 |
[4] | Q.G. Zhang, M.Y. Gu, Mater. Sci. Eng. A 419, 86(2006)10.1016/j.msea.2005.11.050 |
[5] | P. Jin, B.L. Xiao, Q.Z. Wang, Z.Y. Ma, Y. Liu, S. Li, Mater. Sci. Eng. A 528, 1504(2011)10.1016/j.msea.2010.10.075 |
[6] | Y.V.R.K. Prasad, K.P. Rao, M. Gupta, Compos. Sci. Technol. 69, 1070(2009)10.1016/j.compscitech.2009.01.032 |
[7] | I.C. Stone, P. Tsakiropoulos, Mater. Sci. Eng. A 241, 19(1998)10.1016/S0921-5093(97)00463-2 |
[8] | J.K.M. Kwok, S.C. Lim, Compos. Sci. Technol. 59, 55(1999)10.1016/S0266-3538(98)00055-4 |
[9] | C.Y. Wang, K. Wu, M.Y. Zheng, Mater. Sci. Eng. A 487, 495(2008)10.1016/j.msea.2008.03.010 |
[10] | Z.J. Li, L.D. Wang, W.D. Fei, Mater. Sci. Eng. A 447, 314(2007)10.1016/j.msea.2006.10.044 |
[11] | K. Euh, S.B. Kang, Mater. Sci. Eng. A 395, 47(2005)10.1016/j.msea.2004.12.051 |
[12] | V.C. Srivastava, A. Schneider, V. Uhlenwinkel, K. Bauckhage, Mater. Sci. Eng. A 412, 19(2005)10.1016/j.msea.2005.09.002 |
[13] | Y.C. Feng, L. Geng, P.Q. Zheng, Z.Z. Zheng, G.S. Wang, Mater. Des. 29, 2023(2008)10.1016/j.matdes.2008.04.006 |
[14] | J.S.S. Babu, C.G. Kang, H.H. Kim, Mater. Des. 32, 3920(2011)10.1016/j.matdes.2011.02.064 |
[15] | B.C. Ko, Y.C. Yoo, Compos. Sci. Technol. 59, 775(1999)10.1016/S0266-3538(98)00118-3 |
[16] | X.N. Zhang, L. Geng, B. Xu, Mater. Chem. Phys. 101, 242(2007)10.1016/j.matchemphys.2006.04.004 |
[17] | X.N. Zhang, L. Geng, G.S. Wang, J. Mater. Process. Technol. 176, 146(2006)10.1016/j.jmatprotec.2006.03.125 |
[18] | B.C. Ko, Y.C. Yoo, Compos. Sci. Technol. 58, 479(1998)10.1016/S0266-3538(97)00147-4 |
[19] | X. Ma, W.D. Zeng, B. Xu, Y. Sun, C. Xue, Y.F. Han, Intermetallics 20, 1(2012)10.1016/j.intermet.2011.08.027 |
[20] | Y.V.R.K. Prasad, K.P. Rao, Mater. Sci. Eng. A 391, 141(2005)10.1016/j.msea.2004.08.049 |
[21] | O. Sivakesavam, Y.V.R.K. Prasad, Mater. Sci. Eng. A 362, 118(2003)10.1016/S0921-5093(03)00296-X |
[22] | E. Cerri, S. Spigarelli, E. Evangelista, P. Cavaliere, Mater. Sci. Eng. A 324, 157(2002)10.1016/S0921-5093(01)01299-0 |
[23] | Y.V.R.K. Prasad, K.P. Rao, Mater. Lett. 60, 2786(2006)10.1016/j.matlet.2006.01.107 |
[24] | Y.V.R.K. Prasad, Indian J. Technol. 28, 435(1990) |
[25] | S. Anbu Selvan, S. Ramanathan, Trans. Nonferrous Metal. Soc. 21, 257(2011)10.1016/S1003-6326(11)60707-3 |
[26] | H.Z. Li, H.J. Wang, M. Zeng, X.P. Liang, H.T. Liu, Compos. Sci. Technol. 71, 925(2011)10.1016/j.compscitech.2011.02.009 |
[27] | Y.C. Lin, L.T. Li, Y.C. Xia, Y.Q. Jiang, J. Alloys Compd. 550, 438(2013)10.1016/j.jallcom.2012.10.114 |
[28] | X.J. Wang, X.S. Hu, K. Wu, K.K. Deng, W.M. Gan, C.Y. Wang, M.Y. Zheng, Mater. Sci. Eng. A 492, 481(2008)10.1016/j.msea.2008.05.046 |
[29] | X.J. Wang, K. Wu, W.X. Huang, H.F. Zhang, M.Y. Zheng, D.L. Peng, Compos. Sci. Technol. 67, 2253(2007)10.1016/j.compscitech.2007.01.022 |
[30] | P. Wanjara, M. Jahazi, H. Monajati, S. Yue, J.P. Immarigeon, Mater. Sci. Eng. A 396, 50(2005)10.1016/j.msea.2004.12.005 |
[31] | R. Ebrahimi, A. Najafizadeh, J. Mater. Process. Technol. 152, 136(2004)10.1016/j.jmatprotec.2004.03.029 |
[32] | A.B. Li, L. Geng, J. Zhang, H.Y. Xu, Z.Z. Zheng, C.K. Yao, Mater. Chem. Phys. 84, 29(2004)10.1016/j.matchemphys.2003.09.016 |
[33] | A. Patel, S. Das, B.K. Prasad, Mater. Sci. Eng. A 530, 225(2011)10.1016/j.msea.2011.09.078 |
[34] | K.P. Rao, Y.V.R.K. Prasad, K. Suresh, N. Hort, K.U. Kainer, Mater. Sci. Eng. A 552, 444(2012)10.1016/j.msea.2012.05.068 |
[35] | R. Raj, Metall. Trans. A 12, 1089(1981)10.1007/BF02643490 |
[36] | R. Zauter, F. Petry, H.J. Christ, H. Mugrabi, Mater. Sci. Eng. A 124, 125(1990)10.1016/0921-5093(90)90142-P |
[37] | C.M. Sellars, W.J. Tegart, Int. Metall. Rev. 17, 1(1972) |
[38] | R. Kaibyshev, O. Sitdikov, I. Mazurina, D.R. Lesuer, Mater. Sci. Eng. A 334, 104(2002)10.1016/S0921-5093(01)01777-4 |
[39] | R. Mahmudi, R. Roumina, B. Raeisinia, Mater. Sci. Eng. A 382, 15(2004)10.1016/j.msea.2004.05.078 |
[40] | V.C. Srivastava, V. Jindal, V. Uhlenwinkel, K. Bauckhage, Mater. Sci. Eng. A 447, 86(2008)10.1016/j.msea.2007.06.086 |
[41] | T.G. Nieh, J.L. Wadsworth, O.D. Sherby,Superplasticity in Metals and Ceramics (Cambidge University, Cambridge, 1997), p. 3310.1017/CBO9780511525230 |
[42] | Y. Li, T.G. Langdon, Acta Mater. 47, 3395(1999)10.1016/S1359-6454(99)00219-0 |
[43] | S. Spigareli, E. Evangelista, E. Cerri, T.G. Longdon, Mater. Sci. Eng. A 319–321, 721(2001)10.1016/S0921-5093(01)01071-1 |
[44] | J.R. Morris, J. Scharff, K.M. Ho, D.E. Turner, Y.Y. Ye, M.H. Yoo, Philos. Mag. A 76, 1065(1997)10.1080/01418619708200015 |
[45] | J. Koike, T. Kobahashi, T. Mukai, H. Watanabe, M. Suzuki, K. Maruyama, K. Higashi, Acta Mater. 51, 2055(2003)10.1016/S1359-6454(03)00005-3 |
[1] | Xin Cai, Xiao-Qiang Hu, Lei-Gang Zheng, Dian-Zhong Li. Hot Deformation Behavior and Processing Maps of 0.3C-15Cr-1Mo-0.5N High Nitrogen Martensitic Stainless Steel [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(5): 693-704. |
[2] | Kwang-Su Kim, Lin-Xiu Du, Hyo-sung Choe, Tae-Hyong Lee, Gyong-Chol Lee. Influence of Vanadium Content on Hot Deformation Behavior of Low-Carbon Boron Microalloyed Steel [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(5): 705-715. |
[3] | Le Zhang, Wei Wang, M. Babar Shahzad, Yi-Yin Shan, Ke Yang. Hot Deformation Behavior of an Ultra-High-Strength Fe-Ni-Co-Based Maraging Steel [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(9): 1161-1172. |
[4] | Yi-Tao Wang, Jian-Bo Li, Yun-Chang Xin, Xian-Hua Chen, Muhammad Rashad, Bin Liu, Yong Liu. Hot Deformation Behavior and Hardness of a CoCrFeMnNi High-Entropy Alloy with High Content of Carbon [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(8): 932-943. |
[5] | Ning Yan, Hong-Shuang Di, Hui-Qiang Huang, R D. K. Misra., Yong-Gang Deng. Hot Deformation Behavior and Processing Maps of a Medium Manganese TRIP Steel [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(8): 1021-1031. |
[6] | Chao Liu, Ming-Chun Zhao, Tugudur Unenbayar, Ying-Chao Zhao, Bin Xie, Yan Tian, Yi-Yin Shan, Ke Yang. Hot Deformation Behavior of a New Nuclear Use Reduced Activation Ferritic/Martensitic Steel [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(7): 825-834. |
[7] | Kun-Kun Deng, Cui-Ju Wang, Kai-Bo Nie, Xiao-Jun Wang. Recent Research on the Deformation Behavior of Particle Reinforced Magnesium Matrix Composite: A Review [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(4): 413-525. |
[8] | Wilasinee Kingkam, Cheng-Zhi Zhao, Hong Li, He-Xin Zhang, Zhi-Ming Li. Hot Deformation and Corrosion Resistance of High-Strength Low-Alloy Steel [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(4): 495-505. |
[9] | Yu-Cheng Zhang, Zhen-Sheng Meng, Yang Meng, Xin-Hua Ju, Zhong-Hang Jiang, Ze-Jun Ma. Effect of Nb Content on the Hot Deformation Behavior of S460ML Steel [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(4): 526-534. |
[10] | Tong Xi, Lu Yin, Chun-Guang Yang, Ke Yang. Hot Deformation Behavior and Processing Map of a Cu-Bearing 2205 Duplex Stainless Steel [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(12): 1537-1548. |
[11] | Chuan Wu, Shuang Han. Hot Deformation Behavior and Dynamic Recrystallization Characteristics in a Low-Alloy High-Strength Ni-Cr-Mo-V Steel [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(9): 963-974. |
[12] | H. Q. Huang, H. S. Di, N. Yan, J. C. Zhang, Y. G. Deng, R. D. K. Misra, J. P. Li. Hot Deformation Behavior and Processing Maps of a High Al-low Si Transformation-Induced Plasticity Steel: Microstructural Evolution and Flow Stress Behavior [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(5): 503-514. |
[13] | Li-Xiong Xu, Hui-Bin Wu, Xin-Tian Wang. Influence of Microstructural Evolution on the Hot Deformation Behavior of an Fe-Mn-Al Duplex Lightweight Steel [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(4): 389-400. |
[14] | Jun Zhang, Cheng-Wu Zheng, Dian-Zhong Li. A Multi-phase Field Model for Static Recrystallization of Hot Deformed Austenite in a C-Mn Steel [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(2): 208-215. |
[15] | Zhao-Yang Jin, Nan-Nan Li, Kai Yan, Jing-Xin Chen, Dong-Lai Wei, Zhen-Shan Cui. Controlling Flow Instability in Straight Spur Gear Forging Using Numerical Simulation and Response Surface Method [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(1): 82-96. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||