[1] B. de Meester, ISIJ Int. 37 (1997) 537. [2] F.Matsuda,K.Ikeuchi,J.Liaoand H.Tanabe,Trans. JWRI 23 (1994) 49. [3] L.D. Yao, X.T. Zhao and S.X. Zhao, U. S. Patent 0032062A1Feb 11(2010). [4] M. Shome, Mater. Sci. Eng. A 445–446 (2007) 454. [5] N.J.Smith,J.T.Mcgrath,J.A.Gianetto andR.F.Orr, Weld Res. 68 (1989) 112. [6] F. Matsuda, K.Ikeuchi,H.Okada,I.Hrivnak and H. S. Park, Trans. JWRI 23 (1994) 231. [7] S. Talas, Mater. Des. 31 (2010) 2649. [8] R. Petrov, O.G. Leon, J.J.L. Mulders, A.C.C. Reis, J. H. Bae, L. Kestens and Y. Houbaert, Mater. Sci. Forum 550 (2007) 625. [9]A.F.Gourgues,H.M. Flower andT.C.Lindley,Mater. Sci. Technol. 16 (2000) 26. [10] M. Diaz-Fuentes,A.Iza-Mendiaand I.Gutierrez,Met. Mater. Trans. A 34 (2003) 2505. [11] A.M. Guo, R.D.K. Misra, J.B. Liu, L.Chen, X.L. He and S.J. Jansto, Mater. Sci. Eng. A 527 (2010) 6440. [12] J.M. Roudriquez-Ibabe, Mater. Sci. Forum 284–286 (1998) 51. [13] ISO 9016, Destructive Tests on Welds in Metallic Materials-impactTests-testSpecimen Location,Notch Orientationand Examination,IDT(2001). [14] C.L. Davis and J.E. King, Metall. Mater. Trans. A 25 (1994) 563. [15] L.Y. Lan, C.L. Qiu, D.W. Zhao, X.H. Gao, and L.X. Du, Mater. Sci. Eng. A 529 (2011) 192. [16] Y. Ohmori, H. Ohtani and T. Kunitake, Met. Sci. 8 (1974) 357. [17] A. Lambert-Perlade, A.F. Gourgues, J. Besson, T. Sturel and A. Pineau, Metall. Mater. Trans. A 35 (2004) 1039. [18] W. Wang,W.Yan,L.Zhu, P.Hu, Y.Y. Shanand K. Yang, Mater. Des. 30 (2009) 3436. [19] Y.M. Huang, Y.M. Wu and C.X. Pan, Mater. Sci. Technol. 6 (2010) 750. [20] V.M. Goritskii and D.P. Khromov, Strength Mater. 16 (1984) 867. [21] P. Yan, O.E. Gungor, P. Thibaux and H.K.D.H. Bhadeshia, Sci. Technol. Weld. Join. 15 (2010) 137. |