An investigation on stability of biomass reduced manganese dioxide ore

doi:10.11890/1006-7191-126-435

Abstract

Abstract:

In this study, how to improve the stability of reduced manganese oxide ore was discussed by investigating reoxidation conditions and kinetics mechanism in the cooling process of manganese dioxide ore reduced by biomass. The effects of the temperature and time, chip size of biomass, raw materials thickness and different additives on stability of the products were determined. The valence variation of manganese in ore and the reoxidation kinetics of reduced products were studied. The results show that decrease of reduction temperature and time, and increase of raw materials thickness and little H₂SO₄ additive are favorable for the stability of the reduced products. The kinetics mechanism of the reoxidation is controlled by diffusion with dynamic apparent activation energy of E₁=25.10 kJ·mol⁻¹, and conformation of manganese in the process is changed from MnO to Mn₃O₄.

Key words: Biomass reduction, Manganese oxide ore, Stability, Reoxidation kinetics

Cite this article

Honglei ZHANG,Guocai ZHU,Hong YAN,Yuna ZHAO,Fangpu CHEN,Wenjuan WANG. An investigation on stability of biomass reduced manganese dioxide ore[J]. Acta Metallurgica Sinica (English Letters), 2012, 25(6): 435-442.

share this article

0
/ / Recommend

Add to citation manager EndNote|Ris|BibTeX

URL: https://www.amse.org.cn/EN/10.11890/1006-7191-126-435

https://www.amse.org.cn/EN/Y2012/V25/I6/435

References

[1] R.N. Sahoo, P.K. Naik and S.C. Das, Hydrometallurgy 62(3)(2001) 157

[2] C. Abbruzzese, M.Y. Duarte, B. Paponetti and L. Toro, Miner 3(3-4) (1990) 307

[3] J. Yang and Z.M. Zeng, China’s Manganese Industry 29(2) (2011) 6 (in Chinese)

[4] T.J. Liu, Z.J. Tan and S.Q. Liao, China’s Manganese Industry 24(1) (2006) 9 (in Chinese)

[5] Z.T. Tan, China’s Manganese Industry 24(2) (2006) 1 (in Chinese)

[6] Z.P. Tian, China’s Manganese Industry 28(2) (2010) 26 (in Chinese)

[7] P.K. Sahoo and K.S. Rao, Int J Miner Process 25(1-2) (1989) 147

[8] T. Jiang and Y.B.Yang, Hydrometallurgy 72(1-2) (2004) 129

[9] A.A. Ismail, E.A. Ali, I.A. Ibrahim and M.S. Ahmed, Can J Chem Eng 82(6) (2004) 1296

[10] G. Senanayake, Hydrometallurgy 73(3-4) (2004) 215

[11] M.N. El Hazek, T.A. Lasheen and A.S. Helal, Hydrometallurgy 84(3-4) (2006) 187

[12] H.F. Su, Y.X. Wen, F. Wang, Y.Y. Sun and Z.F. Tong, Hydrometallurgy 93(3-4) (2008) 136

[13] M.S. Bafghi, A. Zakeri, Z. Ghasemi and M. Adeli, Hydrometallurgy 90(2-4) (2008) 207

[14] R.N. Sahoo, P.K. Naik and S.C. Das, Hydrometallurgy 62(3) (2001) 157

[15] F. Pagnanelli, G. Furlani, P. Valentini, F. Veglio and L. Toro, Hydrometallurgy 75(1-4) (2004) 157

[16] S. Acharya, Metall Trans B 22B(2) (1991) 259

[17] Z. Cheng, G.C. Zhu and Y.N. Zhao, Hydrometallurgy 96(1-2) (2009) 176

[18] J.J. Song, G.C. Zhu, P. Zhang and Y.N. Zhao, Acta Metall Sin (Engl Lett) 23(3) (2010) 223

[19] T.J. Chen, G.Z. Qiu and D.Q. Zhu, Min Metall Eng 28(3) (2008) 64 (in Chinese)

Related Articles 15

[1]	Yongfei Juan, Jiao Zhang, Yongbing Dai, Qing Dong, Yanfeng Han. Designing Rules of Laser-Clad High-Entropy Alloy Coatings with Simple Solid Solution Phases [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1064-1076.
[2]	Yu-Ning Zan, Yang-Tao Zhou, Xiao-Nan Li, Guo-Nan Ma, Zhen-Yu Liu, Quan-Zhao Wang, Dong Wang, Bo-Lv Xiao, Zong-Yi Ma. Enhancing High-Temperature Strength and Thermal Stability of Al₂O₃/Al Composites by High-Temperature Pre-treatment of Ultrafine Al Powders [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(7): 913-921.
[3]	Dongping Zhan, Guoxing Qiu, Changsheng Li, Yongkun Yang, Zhouhua Jiang, Huishu Zhang. Evolution of Microstructures and Mechanical Properties of Zr-Containing Y-CLAM During Thermal Aging [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(6): 881-891.
[4]	Xuyang Wang, Jieren Yang, Rui Hu, Zitong Gao, Jinguang Li, Hengzhi Fu. Creep-Induced Phase Instability and Microstructure Evolution of a Nearly Lamellar Ti-45Al-8.5Nb-(W, B, Y) Alloy [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1591-1600.
[5]	Xiao Li, Bo Guan, Yun-Fei Jia, Yun-Chang Xin, Cheng-Cheng Zhang, Xian-Cheng Zhang, Shan-Tung Tu. Microstructural Evolution, Mechanical Properties and Thermal Stability of Gradient Structured Pure Nickel [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(8): 951-960.
[6]	Ning Yan, Hong-Shuang Di, Hui-Qiang Huang, R D. K. Misra., Yong-Gang Deng. Hot Deformation Behavior and Processing Maps of a Medium Manganese TRIP Steel [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(8): 1021-1031.
[7]	Hui Wang, Cheng Lu, Kiet Tieu, Yu Liu, Rui Wang, Jintao Li. Correlation Between Crystal Rotation and Redundant Shear Strain in Rolled Single Crystals: A Crystal Plasticity FE Analysis [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(4): 452-460.
[8]	Yang Zhao, Wen-Ting Zhu, Shu Yan, Li-Qing Chen. Effect of Microstructure on Tensile Behavior and Mechanical Stability of Retained Austenite in a Cold-Rolled Al-Containing TRIP Steel [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(10): 1237-1243.
[9]	Yan?Ming Liu, Tong Li, Feng Liu, Zhi-Liang Pei. Thermal Stability of WB₂ and W-B-N Films Deposited by Magnetron Sputtering [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(1): 136-144.
[10]	Feng Wang, Dong-Sheng Qian, Xiao-Hui Lu. Effect of Prior Cold Deformation on the Stability of Retained Austenite in GCr15 Bearing Steel [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(1): 107-115.
[11]	Shao-Heng Sun, Ai-Min Zhao, Ran Ding, Xiao-Gang Li. Effect of Heat Treatment on Microstructure and Mechanical Properties of Quenching and Partitioning Steel [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(2): 216-224.
[12]	Hong-Yan Dai, Hui-Min Yang, Xuan Jian, Xian Liu, Zhen-Hai Liang. Performance of Ag₂O/Ag Electrode as Cathodic Electron Acceptor in Microbial Fuel Cell [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(12): 1243-1428.
[13]	Jiang-Man Xu, Yong Liu, Bin Jin, Jia-Xin Li, Shi-Ming Zhai, Xiang-Jie Yang, Jian Lu. Thermal Stability of Nanocrystalline AZ31 Magnesium Alloy Fabricated by Surface Mechanical Attrition Treatment [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(9): 1162-1169.
[14]	Xiao-Hui Lu, Wei Li, Cheng-Lin Wang, Hong-Shan Zhao, Xue-Jun Jin. Effects of Sub-zero Celsius Treatment and Tempering on the Stability of Retained Austenite in Bearing Steel [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(6): 787-792.
[15]	Sheng-Hua Wu, Nan-Nan Song, Francisco M. Andrade Pires, Abel D. Santos. Prediction of Forming Limit Diagrams for Materials with HCP Structure [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(12): 1442-1451.

Metrics

Viewed

Full text

Abstract

Comments

Abstract
References
Related Articles
Recommended Articles
Metrics
Comments

TOP