ANALYSIS ON KINETICS OF CARBIDE DIFFUSION COATING

Search for articles:

Acta Metallurgica Sinica (English Letters) ›› 1989, Vol. 2 ›› Issue (12): 375-379.

• Research paper • Previous Articles Next Articles

ANALYSIS ON KINETICS OF CARBIDE DIFFUSION COATING

HAO Shiming SUN Rongyao Northeast University of Technology,Shenyang,China

Received:1989-12-11 Revised:1989-12-11 Online:1989-12-11 Published:2009-10-10

Abstract

Abstract: A kinetic model for carbide diffusion coating has been proposed bused on the theory of steady diffusion and the sublattice model of solid solution.It is supposed that the growth rate of car- bide layer is controlled by the volume diffusion coefficient of carbon (?)s in carbide layer and the activity of carbon in steel substrate.The calculated results for V_4C_3 coating treatment of commercial steels T10.45,Crl2MoV,4Cr5MoVSi are in good agreement with the exper- imental data.

Key words: diffusion coating, carbide, kinetics

HAO Shiming SUN Rongyao Northeast University of Technology,Shenyang,China. ANALYSIS ON KINETICS OF CARBIDE DIFFUSION COATING[J]. Acta Metallurgica Sinica (English Letters), 1989, 2(12): 375-379.

About AMSE

Authors and reviewers

Contact

WeChat

[1]	Guang-Lei Wang, Dong-Qing Qi, Ji-De Liu, Jin-Lai Liu, Yi-Zhou Zhou, Xu-Dong Sun, Hai-Feng Zhang, Xiao-Feng Sun. Effect of Interactions Among Elements on Diffusion Process Associated with γ′ Coarsening in a Ni-Based Single-Crystal Superalloy [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(7): 1013-1020.
[2]	Yongkui Li, Jianxin Lou, Hongtao Ju, Li Lin. Impact Toughness of Heat-Affected Zones of 11Cr Heat-Resistant Steels [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(6): 821-827.
[3]	Boxiang Wang, Zhenhua Wang, Juntang Yuan, Bin Yu. Effects of (Ti, W)C Addition on the Microstructure and Mechanical Properties of Ultrafine WC-Co Tool Materials Prepared by Spark Plasma Sintering [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(6): 892-902.
[4]	Wen-Chao Dong, Ming-Yue Wen, Hui-Yong Pang, Shan-Ping Lu. Effect of Post-weld Tempering on the Microstructure and Mechanical Properties in the Simulated HAZs of a High-Strength-High-Toughness Combination Marine Engineering Steel [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(3): 391-402.
[5]	Han Zheng, Liming Fu, Xinbo Ji, Ziyong Li, Yanle Sun, Sixin Zhao, Wei Wang, Aidang Shan. Granular Carbides-Assisted Ultrafine-Ferrite Fabrication in the Pearlitic Steel Without Severe Plastic Deformation and Annealing [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1645-1656.
[6]	Zhen-Yang Li, Sheng-Li Li, Ze-Ming Yuan, Yang-Huan Zhang. Effects of Ni Content and Ball Milling Time on the Hydrogen Storage Thermodynamics and Kinetics Performances of La-Mg-Ni Ternary Alloys [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(8): 961-971.
[7]	Shuang-Jian Chen, Xiang-Xi Ye, D.K. L.Tsang, Li Jiang, Chao-Wen Li, Kun Yu, Zhi-Jun Li . Microstructure and Its Influence on the Mechanical Properties of Ni-28W-6Cr-Based Alloy-Welded Joints by GTAW [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(8): 1032-1040.
[8]	Xiang-Wei Li, Li Wang, Xin-Gang Liu, Yao Wang, Jia-Sheng Dong, Lang-Hong Lou. Effect of Aging Heat Treatment on the Microstructure and Creep Properties of the Cast Ni-Based Superalloy at Low Temperature [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(5): 651-658.
[9]	Farahnaz Haftlang, Ali Habibolahzadeh. Influence of Treatment Sequence on Tribological Performance of Duplex Surface-Treated AISI 1045 Steel [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(10): 1227-1236.
[10]	Tao Liu, Mei Yang, Jun-Song Wang, Jia-Sheng Dong, Li Wang, Lang-Hong Lou. Effect of Heat Treatment on Microstructure and Stress Rupture Properties of a Ni-Mo-Cr-Fe Base Corrosion-Resistant Superalloy [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(1): 116-126.
[11]	Chuan Wu, Shuang Han. Hot Deformation Behavior and Dynamic Recrystallization Characteristics in a Low-Alloy High-Strength Ni-Cr-Mo-V Steel [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(9): 963-974.
[12]	Yong-Jin Wang, Ren-Bo Song, Ren-Feng Song. Phase Transformation and Carbide Precipitation of Functional Gradient Semi-solid 9Cr18 Steel [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(8): 823-830.
[13]	Zhi-Nan Wang, Tian Liang, Wei-Wei Xing, Ai-Bing Du1, Ming Gao, Ying-Che Ma, Kui Liu. σ-Phase Precipitation Mechanism of 15Cr-15Ni Titanium-Modified Austenitic Stainless Steel During Long-Term Thermal Exposure [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(3): 281-289.
[14]	Xiao-Lin Pan, Minoru Umemoto. Precipitation Characteristics and Mechanism of Vanadium Carbides in a V-Microalloyed Medium-Carbon Steel [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(11): 1197-1206.
[15]	Wei-Min Gui, Hong-Yu Zhang, Hai-Bo Long, Tao Jin, Xiao-Feng Sun, Qi Zheng. Formation Mechanism of Lamellar M ₂₃C₆ Carbide in a Cobalt-Base Superalloy During Thermal Exposure at 1000 °C [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(1): 27-32.

ANALYSIS ON KINETICS OF CARBIDE DIFFUSION COATING

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments