FRACTAL ANALYSIS OF IMPACT FRACTURE IN STEEL

Abstract

Abstract: By means of fractal analysis,the fractal dimension with relation to the impact toughness,im- pact fracture characteristics and mierostructures of steel under low temperature impact have been investigated.Experimental results show that the logarithms of impact toughness in- creases monotonically with the increase of fractal dimension.The microstruetures have a great influence on fraetal dimension.There is an appropriate correlation between fraetal dimension and fracture mechanism.

Key words: fractal dimension, imnpact toughness, yardstick length, fracture

SU Hui ZHANG Yugui YAN Zhenqi Northeast University of Technology,Shenyang,China YAN Zhenqi Professor Dept.of Materials Science and Engineering,Northeast University of Technology,Shenyang 110006,China. FRACTAL ANALYSIS OF IMPACT FRACTURE IN STEEL[J]. Acta Metallurgica Sinica (English Letters), 1990, 3(3): 226-228.

[1]	Guang-Da Sun, Li Zhou, Ren-Xiao Zhang, Ling-Yun Luo, Hao Xu, Hong-Yun Zhao, Ning Guo, Di Zhang. Effect of Sleeve Plunge Depth on Interface/Mechanical Characteristics in Refill Friction Stir Spot Welded Joint [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(4): 551-560.
[2]	Ke Xu, Tao Fang, Longfei Zhao, Haichao Cui, Fenggui Lu. Effect of Trace Element on Microstructure and Fracture Toughness of Weld Metal [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(3): 425-436.
[3]	Hamid Ashrafi, Morteza Shamanian, Rahmatollah Emadi, Ehsan Ghassemali. Void Formation and Plastic Deformation Mechanism of a Cold-Rolled Dual-Phase Steel During Tension [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(2): 299-306.
[4]	Mao-Kai Chen, Jun Xie, De-Long Shu, Gui-Chen Hou, Shu-Ling Xun, Jin-Jiang Yu, Li-Rong Liu, Xiao-Feng Sun, Yi-Zhou Zhou. Effect of Long-Term Thermal Exposures on Tensile Behaviors of K416B Nickel-Based Superalloy [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1699-1708.
[5]	Manoj Kumar Pathak, Amit Joshi, K. K. S. Mer, R. Jayaganthan. Mechanical Properties and Microstructural Evolution of Bulk UFG Al 2014 Alloy Processed Through Cryorolling and Warm Rolling [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(7): 845-856.
[6]	Peng Liu, Zhao-Kuang Chu, Yong Yuan, Dao-Hong Wang, Chuan-Yong Cui, Gui-Chen Hou, Yi-Zhou Zhou, Xiao-Feng Sun. Microstructures and Mechanical Properties of a Newly Developed Austenitic Heat Resistant Steel [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(4): 517-525.
[7]	Liu Liu, Jie Meng, Jin-Lai Liu, Hai-Feng Zhang, Xu-Dong Sun, Yi-Zhou Zhou. Effects of Crystal Orientations on the Low-Cycle Fatigue of a Single-Crystal Nickel-Based Superalloy at 980 °C [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(3): 381-390.
[8]	Rong-Hua Li, Peng Zhang, Zhe-Feng Zhang. Torsional Fatigue Cracking and Fracture Behaviors of Cold-Drawn Copper: Effects of Microstructure and Axial Stress [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(12): 1521-1529.
[9]	Xu Kong, Yu-Min Wang, Xu Zhang, Qing Yang, Guo-Xing Zhang, Li-Na Yang, Rui Yang. Monitoring Damage Evolution in a Titanium Matrix Composite Shaft Under Torsion Loading Using Acoustic Emission [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(10): 1244-1252.
[10]	A. A. Yuriev, V. E. Gromov, V. A. Grishunin, Yu. F. Ivanov, R. S. Qin, A. P. Semin. Stages and Fracture Mechanisms of Lamellar Pearlite of 100-m-Long Differentially Hardened Rails Under Long-Term Operation Conditions [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(12): 1356-1361.
[11]	Dong-Wei Ao, Xing-Rong Chu, Shu-Xia Lin, Yang Yang, Jun Gao. Hot Tensile Behaviors and Microstructure Evolution of Ti-6Al-4V Titanium Alloy Under Electropulsing [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(12): 1287-1296.
[12]	Jie Yang. Micromechanical Analysis of In-Plane Constraint Effect on Local Fracture Behavior of Cracks in the Weakest Locations of Dissimilar Metal Welded Joint [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(9): 840-850.
[13]	Li-Qing Wang, Yu-Ping Ren, Shi-Neng Sun, Hong Zhao, Song Li, Gao-Wu Qin. Microstructure, Mechanical Properties and Fracture Behavior of As-Extruded Zn-Mg Binary Alloys [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(10): 931-940.
[14]	Gang Wang,Li-Hui Lang,Wen-Jun Yu,Xi-Na Huang,Fei Li. Influences of Hot-Isostatic-Pressing Temperature on the Microstructure, Tensile Properties and Tensile Fracture Mode of 2A12 Powder Compact [J]. Acta Metallurgica Sinica (English Letters), 2016, 29(10): 963-974.
[15]	Shuai Guan, Chuan-Yong Cui. A Newly Developed Wrought Ni-Fe-Cr-based Superalloy for Advanced Ultra-Supercritical Power Plant Applications Beyond 700 °C [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(9): 1083-1088.

FRACTAL ANALYSIS OF IMPACT FRACTURE IN STEEL

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments