Abstract:

The second-generation single-crystal superalloy DD6 with [001] orientation was prepared by screw selecting method in the directionally solidified furnace. The long-term aging of the alloy after full heat treatment was performed at 1100 °C for 400 h. Then the rejuvenation heat treatment 1300 °C/4 h/AC + 1120 °C/4 h/AC + 870 °C/24 h/AC was carried out. The stress rupture properties were investigated at 760 °C/800 MPa, 850 °C/550 MPa, 980 °C/250 MPa and 1100 °C/140 MPa after different heat treatments. The microstructures of the alloy at different conditions were studied by SEM. The results show that γ′ phase of the alloy became very irregular and larger after long-term aging at 1100 °C for 400 h. A very small amount of needle-shaped TCP phase precipitated in the dendrite core. The coarsened γ′ phase and TCP phase dissolved entirely after rejuvenation heat treatment. The microstructure was restored and almost same with the original microstructure. The stress rupture life of the alloy decreased in different degrees at various test conditions after long-term aging. The stress rupture life of the alloy after rejuvenation heat treatment all restores to the original specimen more than 80% at different conditions. The microstructure degradation of the alloy during long-term aging includes coarsening of the γ′ phase, P-type raft and precipitation of TCP phase, which results in the degeneration of stress rupture property. The rejuvenation heat treatment succeeds in restoring the original microstructure and stress rupture properties of the alloy.

Key words: Single-crystal superalloy, DD6, Rejuvenation heat treatment, Stress rupture properties