Corrosion Behavior and Biocompatibility of Hydroxyapatite Coating on H2SO4 Passivated 316L SS for Human Body Implant

doi:10.1007/s40195-012-0212-3

Abstract

Abstract:

The aim of this studies at simultaneous improvement of the corrosion behavior and biocompatibility of metallic implant and bone Osseointegration simultaneously. Stainless steel 316L (SS) was used as metallic substrate and after surface treatment with 15 vol.% sulfuric acid, it was coated with hydroxyapatite coating employing plasma-spraying process. Structure characterization techniques including XRD, SEM and EDX were also utilized to investigate the microstructure, morphology, and crystallinity of the coating. Electrochemical potentiodynamic tests were performed in two types of physiological solutions in order to determine and compare the corrosion resistance behavior of the coated and uncoated specimens as an indication of biocompatibility.

The results indicate that the surface treatment and hydroxyapatite coating improve the corrosion resistance behavior of SS. The corrosion current density of the surface treated and the hydroxyapatite coated SS also decrease. These also show that surface treated and hydroxyapatite coated SS can be used as human body implants with the goals of corrosion resistance improvement (biocompatibility) and bone osseointegration.

Key words: Surface treatment, Hydroxyapatite coating, Corrosion behavior, Plasma spray, Stainless steel 316L, Human body implant

Ali Parsapour, Saied Nouri Khorasani,Mohammad Hossein Fathi. Corrosion Behavior and Biocompatibility of Hydroxyapatite Coating on H₂SO₄ Passivated 316L SS for Human Body Implant[J]. Acta Metallurgica Sinica (English Letters), 2013, 26(4): 409-415.

References

[1]S. Nagarajan and N. Rajendran, Appl. Surf. Sci.255(2009) 3927
[2]D. Sharan, The Problem of Corrosion in Orthopedic Implant Materials, Orthopedic Update, India, 1999, Vol. 9, pp.1-5.
[3]H. Takao, Mater. Sci. Eng. 267(1999)260.
[4]R. Venugopalan and J. Gaydon, A Review of Corrosion Behavior of Surgical Implant Alloys, Department of Biomedical Engineering, University of Alabama at Birmingham.
[5]D.F. Williams, Definitions in Biomaterials, Proceeding of a Consensus Conference of the European Society for Biomaterials,England, 1986, p.4.
[6]R.Venugopalan and C. Trepanier, Min. Invas. Ther. & Allied Technol.9(2000)67.
[7]Y. Okazaki and E. Gotoh, Biomaterials 26(2005)11.
[8]E. Leitao, R.A. Silva and M.A. Barbosa, Mater. Sci.8(1997)365.
[9]S.R. Sousa and M.A. Barbosa, Mater. Sci.2(1991)19.
[10]M.H. Fathi, S.B. Moosavi and V. Mortazavi, Dent. Res.J.1(2003)36.
[11]T. Urs, I. Uggowitzer and J. Peter, Wear239 (2000) 48.
[12]K.H.W. Seah and X. Chen, J. Mater. Sci.8(1993) 1841.
[13]S. Kannan, A. Balamurugan and S. Rajeswari,Electrochem. Acta49(2004) 2395.
[14]S. Herts, Passivation Stainless Steel by Anselm Kuhn Metal Finishing Information Services Ltd., U.K. Metal Finishing,1998, pp.100-105.
[15]C. Shih, C.M. Shi, Y. Su, M.S. Chang and S.J. Lin,Corros. Sci.46(2004) 427.
[16] L.P. Ward, K.N. Strafford, T.P. Wilks and C.Subramanian, J. Mater. Process. Technol.56(1996) 364.
[17]ASTM F86: Standard Recommended Practice for surface preparation and marking of Metallic Surgical Implant In: Medical Device and Services, PA: American Society for Testing and Materials, 1998, 13.01, pp.7-9.
[18]M.H. Fathi, V. Mortazavi and S.B. Moosavi, Designing, Preparing and Evaluation of Novel HA/Ti Composite Coating for Endodontic Dental Implant, J. Dentistry. Tehran University of Medical Science, 2002, 15.
[19]J.M. Bastidas, C.L. Torres, E. Cano and J.L. Polo,Corros. Sci.44(2002) 625.
[20]S. Nagarajan, V. Raman and N. Rajendran, Mater. Chem.Phys.119(2010) 363.
[21]F.S. Shieu, M.J. Deng and S.H. Lin, Corros. Sci.40(1998) 1267.
[22]S. Kannan, A. Balamurugan and S. Rajeswari,Electrochem. Acta49(2004) 2395.
[23]M.A. Baker and J.E. Castle, Corros. Sci.35(1993) 667.
[24]P. Marcus, Corros. Sci.36(1994) 2155.
[25]ASTM G5: Standard Reference Test Method for making Potentiostaic and Potentiodynamic Anodic Polarization Measurements In; metals, Test Methods and Analytical procedures, Philadelphia, PA: American Society for Testing and Materials, 1995, 03.02, pp.48-58.
[26]L.L. Hench and J. Wilson, An Introduction to Bioceramics, World Scientific, London, 1993, pp.23-59.
[27]C. Guzman Vazquez, C. Pina Barba and N. Munguia, Revista Mexicana Fisica51(2005) 284.
[28]W. Suchanek and M. Yoshimura, J. Mater. Res.13 (1989) 94.
[29]U. Bismayer, J. Shi, A. Klocke, S. Gierlotka and B.Palosz, Key Eng. Mater.288-289(2005) 561.
[30] K. Bordji, J.Y. Jouzeau, D. Mainard, E. Payan and P.Netter, Biomaterials17(1996) 491.
[31] E. Park, R.A. Condrate, D. Lee, K. Kociba and P.K.Gallagher, J. Mater. Sci: Med13(2002) 211.
[32]K.T. Oh and Y.S. Park, Surf. Coat. Technol.110(1998) 4.
[33] M.C.P. Ereira, M.L. Pereira and J.P. Sousa, Biomaterials 20(1999) 2193.
[34] M.H. Fathi, M. Salehi, A. Saatchi, V. Mortazavi and S.B.Moosavi, Dent. Mater.19(2003)188.

Corrosion Behavior and Biocompatibility of Hydroxyapatite Coating on H₂SO₄ Passivated 316L SS for Human Body Implant

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	He Huang, Huan Liu, Li-Sha Wang, Yu-Hua Li, Solomon-Oshioke Agbedor, Jing Bai, Feng Xue, Jing-Hua Jiang. A High-Strength and Biodegradable Zn-Mg Alloy with Refined Ternary Eutectic Structure Processed by ECAP [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1191-1200.
[2]	Li-Sha Wang, Jing-Hua Jiang, Bassiouny Saleh, Qiu-Yuan Xie, Qiong Xu, Huan Liu, Ai-Bin Ma. Controlling Corrosion Resistance of a Biodegradable Mg-Y-Zn Alloy with LPSO Phases via Multi-pass ECAP Process [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1180-1190.
[3]	Dan-Yang Liu, Jin-Feng Li, Yong-Cheng Lin, Peng-Cheng Ma, Yong-Lai Chen, Xu-Hu Zhang, Rui-Feng Zhang. Cu/Li Ratio on the Microstructure Evolution and Corrosion Behaviors of Al-xCu-yLi-Mg Alloys [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1201-1216.
[4]	Wen-Ya Zhang, Can-Ming Wang, Jing-Xin Ji, Xiao-Li Feng, Hong-Zhi Cui, Qiang Song, Chun-Zhi Zhang. Synthetic Effect of Cr and Mo Elements on Microstructure and Properties of Laser Cladding NiCr_xMo_y Alloy Coatings [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(10): 1331-1345.
[5]	Jing-Jing Liao, Zhong-Bo Yang, Shao-Yu Qiu, Qian Peng, Zheng-Cao Li, Ming-Sheng Zhou, Hong Liu. Corrosion of New Zirconium Claddings in 500 °C/10.3 MPa Steam: Effects of Alloying and Metallography [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(8): 981-994.
[6]	Ying Han, Hong-Rui Wang, Yun-Dong Cao, Wen-Tao Hou, Shu-Jun Li. Improved Corrosion Resistance of Selective Laser Melted Ti-5Cu Alloy Using Atomized Ti-5Cu Powder [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(8): 1007-1014.
[7]	Bao-Biao Yu, Hong Yan, Jian-Bin Zhu, Jian-Long Liu, Huo-Gen Li, Qiao Nie. Effects of La on Microstructure and Corrosion Behavior of AlSi5Cu1Mg Alloy [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(4): 443-451.
[8]	Ruo-Yu Liu, Ran-Gan He, Yan-Xia Chen, Sheng-Feng Guo. Effect of Ag on the Microstructure, Mechanical and Bio-corrosion Properties of Fe-30Mn Alloy [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(11): 1337-1345.
[9]	Farahnaz Haftlang, Ali Habibolahzadeh. Influence of Treatment Sequence on Tribological Performance of Duplex Surface-Treated AISI 1045 Steel [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(10): 1227-1236.
[10]	Bao-Jie Wang, Ji-Yu Luan, Dao-Kui Xu, Jie Sun, Chuan-Qiang Li, En-Hou Han. Research Progress on the Corrosion Behavior of Magnesium-Lithium-Based Alloys: A Review [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(1): 1-9.
[11]	Luan-Xiang Wang, Ren-Bo Song, Chang-Hong Cai, Jing-Yuan Li. Enhanced Strength and Corrosion Resistance of Mg-2Zn-0.6Zr Alloy with Extrusion [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(1): 10-22.
[12]	Can Huang, Jian Tu, Yu-Ren Wen, Zhi Hu, Zhi-Ming Zhou, An-Ping Dong, Guo-Liang Zhu. Microstructural Characterization of Pure Titanium Treated by Laser Surface Treatment Under Different Processing Parameters [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(3): 321-328.
[13]	Bo Li, Jun-Hong Jia, Yi-Min Gao, Hong-Jian Guo, Min-Min Han, Wen-Zhen Wang. Influence of Silver Contents on the Tribological Properties of Ni-Based Self-Lubricating Coatings by Atmospheric Plasma Spraying [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(8): 801-808.
[14]	Huan-Huan Wang, Du Min ?. Corrosion Behavior of a Low-Carbon Steel in Simulated Marine Splash Zone [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(6): 585-593.
[15]	Chao-Yang Gong, Xiao-Yong He, Yong-Wei Li, Si-Zhe He, Xuan Cheng, Liu-Ying Huang, Ying Zhang, Jiu-Bin Chen, Shao-Hui Xu, Jian-Bin Zhang, Chao Zeng. Long-term Field Corrosion Monitoring in Supporting Structures of China Xiamen Xiangan Subsea Tunnel [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(4): 399-408.