Acta Metallurgica Sinica (English Letters) ›› 2015, Vol. 28 ›› Issue (12): 1435-1441.DOI: 10.1007/s40195-015-0343-4
• Article • Previous Articles Next Articles
Jennifer Steiner(), Marion Merklein
Received:
2015-06-30
Revised:
2015-06-30
Online:
2015-12-09
Published:
2015-12-15
Jennifer Steiner, Marion Merklein. Investigation of Influencing Parameters for Tribological Conditions in Dry Forming Processes[J]. Acta Metallurgica Sinica (English Letters), 2015, 28(12): 1435-1441.
Add to citation manager EndNote|Ris|BibTeX
Velocity Vrel (mm/s) | 50, 100 and 150 |
---|---|
Normal Pressure pN (MPa) | 1.0, 1.5 and 2.0 |
Lubricational condition | Lubricated with 2.0 g/m2 KTL N 16 and dry condition |
Table 1 Experimental design and test parameters (nAA6014 = 3)
Velocity Vrel (mm/s) | 50, 100 and 150 |
---|---|
Normal Pressure pN (MPa) | 1.0, 1.5 and 2.0 |
Lubricational condition | Lubricated with 2.0 g/m2 KTL N 16 and dry condition |
Fig. 8 Surface morphologies after strip drawing tests for friction jaw a-f and strip No. 1 g-i under different normal pressures: a, d, g 1.0 MPa; b, e, h 1.5 MPa; c, f, i 2.0 Mpa
[1] | F. Vollertsen, F. Schmidt, Int. J. Precis. Eng. Manuf. Green Technol. 2, 59(2014) |
[2] | A. Ghiotti, S. Bruschi, Wear 271, 2454 (2011) |
[3] | J. Hirsch, T. Al-Samman, Acta Mater. 61, 818(2013) |
[4] | S. Kataoka, M. Murakawa, T. Aizawa, H. Ike, Surf. Coat. Technol. 177-178, 582(2004) |
[5] | M. Murakawa, S. Takeuchi, Surf. Coat. Technol. 163-164, 561(2003) |
[6] | J. Coello, V. Miguel, A. Martinez, F.J. Avellaneda, A. Calatayud, Wear 305, 129 (2013) |
[7] | C.J. Kuwer (2007) Dissertation, RWTH Aachen, Berichte aus der Produktionstechnik 22 |
[8] | D.K. Karupannasamy, J. Hol, D.J. Schipper, Wear 294-295, 296(2012) |
[9] | W. Miller, L. Zhuang, J. Bottema, A.J. Wittebrood, P. De Smet, A. Haszler, A. Vieregge, Mater. Sci. Eng. A 280, 37 (2000) |
[10] | M. Meiler, H. Jaschke, Adv. Mater. Res. 6C8, 551(2005) |
[11] | A. Matuszak, J. Mater. Process. Technol. 106, 250(2000) |
[12] | A. Birkert, S. Haage, M. Straub, Berlin, 2013) |
[13] | B.N.J. Berlin, 2000) |
[14] | Z.G. Wang, Y. Yoshikawa, T. Suzuki, K. Osakada, CIRP Ann. Manuf. Technol. 63, 277(2014) |
[15] | A. Vencl, I. Bobic, B. Stojanovic, Ind. Lubr. Tribol. 66, 66(2014) |
[16] | H. Ashrafi, M.H. Enayati, R. Emadi, Acta Metall. Sin. (Engl. Lett.) 28, 83(2015) |
[17] | V. Weihnacht, A. Brckner, Vakuum Forschung und Praxis 20, 6 (2008) |
[18] | T. Horiuchi, S. Yoshihara, Y. Iriyama, Wear 286-287, 79(2012) |
[1] | Jinglin Liu, Qi Song, Lihui Song, Shude Ji, Mingshen Li, Zhen Jia, Kang Yang. A Novel Friction Stir Spot Riveting of Al/Cu Dissimilar Materials [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(1): 135-144. |
[2] | Quan Wen, Wenya Li, Vivek Patel, Luciano Bergmann, Benjamin Klusemann, Jorge F. dos Santos. Assessing the Bonding Interface Characteristics and Mechanical Properties of Bobbin Tool Friction Stir Welded Dissimilar Aluminum Alloy Joints [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(1): 125-134. |
[3] | Tianbo Zhao, Yutaka S. Sato, Hiroyuki Kokawa, Kazuhiro Ito. Predicting Tensile Properties of Friction-Stir-Welded 6063 Aluminum with Experimentally Measured Welding Heat Input [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1235-1242. |
[4] | Jinling Lu, Zhenjiang Wang, Wei Wang, Kexuan Zhou, Feng He, Zhijun Wang. Superior Slurry Erosion Behavior of a Casting NiCoCrFeNb0.45 Eutectic High Entropy Alloy [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1111-1116. |
[5] | Xiaochao Liu, Yufeng Sun, Tomoya Nagira, Kohsaku Ushioda, Hidetoshi Fujii. Effect of Stacking Fault Energy on the Grain Structure Evolution of FCC Metals During Friction Stir Welding [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(7): 1001-1012. |
[6] | Ning Li, Cun-Lei Jia, Zhi-Wei Wang, Li-Hui Wu, Ding-Rui Ni, Zheng-Kun Li, Hua-Meng Fu, Peng Xue, Bo-Lv Xiao, Zong-Yi Ma, Yi Shao, Yun-Long Chang. Achieving a High-Strength CoCrFeNiCu High-Entropy Alloy with an Ultrafine-Grained Structure via Friction Stir Processing [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(7): 947-956. |
[7] | Jinyong Gao, Lijun Yang, Lei Cui, Peng Lu, Jun Yang, Yanjun Gao. Improving the Weld Formation and Mechanical Properties of the AA-5A06 Friction Pull Plug Welds by Axial Force Control [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(6): 828-838. |
[8] | Guang-Da Sun, Li Zhou, Ren-Xiao Zhang, Ling-Yun Luo, Hao Xu, Hong-Yun Zhao, Ning Guo, Di Zhang. Effect of Sleeve Plunge Depth on Interface/Mechanical Characteristics in Refill Friction Stir Spot Welded Joint [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(4): 551-560. |
[9] | Jin Hyuk Choi, Gobinda Gyawali, Dhani Ram Dhakal, Bhupendra Joshi, Soo Wohn Lee. Electrodeposited Ni-W-TiC Composite Coatings: Effect of TiC Reinforcement on Microstructural and Tribological Properties [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(4): 573-582. |
[10] | Nan Xu, Ruo-Nan Feng, Wen-Feng Guo, Qi-Ning Song, Ye-Feng Bao. Effect of Zener-Hollomon Parameter on Microstructure and Mechanical Properties of Copper Subjected to Friction Stir Welding [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(2): 319-326. |
[11] | Jun-Lei Zhang, Han Liu, Yu-Lu Xie, Guang-Sheng Huang, Xiang Chen, Bin Jiang, Ai-Tao Tang, Fu-Sheng Pan. Microstructure Distribution and Tensile Anisotropy of Dissimilar Friction Stir Welded AM60 and AZ31 Magnesium Alloys [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(11): 1487-1504. |
[12] | Hongduo Wang, Kuaishe Wang, Wen Wang, Yongxin Lu, Pai Peng, Peng Han, Ke Qiao, Zhihao Liu, Lei Wang. Microstructure and Mechanical Properties of Low-Carbon Q235 Steel Welded Using Friction Stir Welding [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(11): 1556-1570. |
[13] | Yang Zhou, Shujin Chen, Di Wang, Ruifeng Li, Bin Liu, Juan Pu, Zhidong Yang. Effect of Shoulder Diameter on the Force Generation, Microstructure and Mechanical Properties of Friction Stir-Brazed Aluminium Alloy and Copper with Ultrahigh Rotation Speed [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(1): 154-164. |
[14] | Dan Chen, Jinglong Li, Huaxia Zhao, Zhejun Tan, Jiangtao Xiong. Effect of Submillimeter Variation in Plunge Depth on Microstructure and Mechanical Properties of FSLW 2A12 Aluminum Alloy Joints [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(1): 165-171. |
[15] | Hua Zhang, Chang-Yu Zhao, Qi-Long Guo, Rui-Sheng Yang, Li-Yuan Liu, San-Bao Lin. Microstructure and Corrosion Behavior of Friction Stir Welded Al Alloy Coated by In Situ Shot-Peening-Assisted Cold Spray [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(1): 172-182. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||