Abstract: Mg-9wt%Li-2wt%Zn alloy was prepared and studied in this article. The addition of Ca to the alloy from 0.1wt% to 1wt% can refine the α-Mg and the best effect of refinement occurs when Ca content is 0.4wt%-0.5wt%. The billets can be rolled to thin sheets at room temperature, from which it is obvious that the addition of Ca improves alloys' formality, while it decreases with the excess addition of Ca. The results also show that the ultimate tensile strength (UTS) and yield strength (YS) of the alloy with 1wt% Ca may rise by 28% and 25%, respectively, however, the elongation decreases. It is clarified that the adsorption of proper Ca on the grain boundaries refines α-Mg and improves the tensile properties, but the presence of excess Ca and stable Ca2Mg6Zn3 phase worsens the elongation.

Key words: calcium, Mg-Li-Zn alloy, cold rolling,