RESEARCH ON REFRACTORY SUPERALLOYS IN THE HTM 21 PROJECT

Abstract

Abstract: It was proposed that a new class of alloys based on platinum group metals (PGMs) were calle drefractory superalloys. These refractory superalloys have an fcc and L12 coherent two-phase structure (similar to that of Ni-based superalloys), high melting temperatures and good potential as structural materials used at temperatures up to 1800℃. Our recent results on the microstructure evolution, deformation and fracture behavior of some of these refracotry superaUoys, especial lr- and Rh-base refractory superalloys were reported.

Key words: platinum group metals, refractory superalloy, microstructure

Y.F.Gu, Y.Yamabe-Mitarai, C.Huang, H.Harada. RESEARCH ON REFRACTORY SUPERALLOYS IN THE HTM 21 PROJECT[J]. Acta Metallurgica Sinica (English Letters), 2005, 18(1): 74-80 .

References

1 C.T. Liu, H. Inouye and A.C. Schaffhauser, Metall. Mater. Trans. 12A (1981) 993.
2 R.L. Fleischer, R.D. Field and C.L. Briant, Metall. Mater. Trans. 22A (1991) 403.
3 R.L. Fleischer, Platinum Metal. Rev. 36(3) (1992) 138.
4 I.M. Wolff and G. Sauthoff, Metall. Mater. Trans. 27A (1996) 2642.
5 I.M. Wolff, JOM( 1997) 34.
6 A.N. Gubbi, E.P. George, E.K. Ohriner and R.H. Zee, Metall. Mater. Trans. 28A (1997) 2049.
7 B. Fischer, A. Behrends, D. Freund, D. Lupton and J. Merker, Platinum Metal. Rev. 43(1) (1999) 18.
8 R. Suss, D. Freund, R. Volkl, B. Fischer, P.J. Hill, P. Ellis and I.M. Wolff, Mater. Sci. Eng. A 338 (2002) 133.
9 D. M. Wee and T. Suzuki, Trans. Me tall. Soc. AIME 20 (1979) 634.
10 D. M. Wee, D. P. Pope and V. Vitek, Acta Metall. 32 (1984) 829.
11 R.L. Fleischer, R.D. Field, K.K. Denike and R.J. Zabala, Metall. Mater. Trans. 21A (1990) 3063.
12 Y. Yamabe, Y. Koizumi, H. Murakami, Y. Ro, T. Maruko and H. Harada, Scripta Materialia 35(2) (1996) 211.
13 Y. Yamabe, Y. Koizumi, H. Murakami, Y. Ro, T. Maruko and H. Harada, Scripta Materialia 35(4) (1996) 393.
14 Y. Yamabe-Mitarai, Y. Ro, T. Yokokawa and H. Harada, Structural Interme tallies 1997, eds. M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.M. Miracle, R. Wagner and M. Yamaguchi (A Publication of the Minerals, Metals & Materials Society, USA, 1997) p.805.
15 Y. Yamabe-Mitarai, Y. Gu and H. Harada, Platinum Metal. Rev. 46(2) (2002) 74.
16 Y. Gu, Y. Yamabe-Mitarai, Y. Ro, T. Yokokawa and H. Harada, Metall. Mater. Trans. 31A (1999) 2629.
17 Y. Gu, Y. Yamabe-Mitarai and H. Harada, Scripta Materialia 46 (2002) 137.
18 Y. Gu, Y. Yamabe-Mitarai and H. Harada, Metall. Mater. Trans. 32A(2002) 1281.
19 Y. Gu, Y. Yamabe-Mitarai, S. Nakazawa and H. Harada, Metall. Mater. Trans. 34A (2003) 2217
20 X.H. Yu, Y. Yamabe-Mitarai and H. Harada, Metall. Mater. Trans. 31A (2000) 173.
21 C. Huang, Y. Yamabe-Mitarai, K. Nishida and H. Harada, Intermetallic 11 (2003) 917.
22 T.B. Massalski, Binary Alloy Phase Diagrams (2nd ed., Vol. 3, ASM Metals Park, OH, 1992) p.2321.
23 R.L. Fleischer, Acta Metal. 11(1963)203.
24 R.R. Jensen and J.K Tien, Metall. Trans. A 16A (1985) 1049.
25 H. Harada, M. Yamazaki, Y. Koizumi, N. Sakuma and H. Kamiya, in Proc. of High Temperature Alloys for Gas Turbines, eds. R. Brunetaund, D. Coutsouradies, T. B. Gibbons, Y. Lindblom, D. B. Meadowcroft and R. Stickler (D. Reidel Publishing Company, Liege, Belgium, 1982) p.721.
26 G. Reinacher, Metallurgy 18 (1964) 731.
27 M.A. Fortes and B. Ralph, Phil. Mag. 18 (1968) 787.
28 S.P. Chen, Phil. Mag. 66 (1992) 1.
29 J.E. Hack, S.P. Chen and D.J. Srolovitz, Acta Metall. 37 (1989) 1957.
30 Y. Gu, Y. Yamabe-Mitarai and H. Harada, Scripta Materialia 41 (2002) 1079.
31 Y. Gu, Y. Yamabe-Mitarai Y. Ro and H. Harada, Mater. Sci. Eng. A 329 (2002) 262.
32 J.R. Handley, Platinum Metals Rev. 30 (1986) 12.
33 P. Panfilov, V. Novgorodov and A. Yermakov, J. Mat. Sci. Lett. 13 (1994) 137.

[1]	Chun-Hua Ma, Fu-Sheng Pan, Ding-Fei Zhang, Ai-Tao Tang, Zhi-Wen Lu. Effects of Sb Addition on Microstructural Evolution and Mechanical Properties of Mg-9Al-5Sn Alloy [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(2): 278-288.
[2]	L. B. Tong, J. H. Chu, D. N. Zou, Q. Sun, S. Kamado, H. G. Brokmeier, M. Y. Zheng. Simultaneously Enhanced Mechanical Properties and Damping Capacities of ZK60 Mg Alloys Processed by Multi-Directional Forging [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(2): 265-277.
[3]	Meichen Liang, Hao Zhang, Lifeng Zhang, Peng Xue, Dingrui Ni, Weizhen Wang, Zongyi Ma, Hengqiang Ye, Zhiqing Yang. Evolution of Quasicrystals and Long-Period Stacking Ordered Structures During Severe Plastic Deformation and Mixing of Dissimilar Mg Alloys Upon Friction Stir Welding [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(1): 12-24.
[4]	Jinglin Liu, Qi Song, Lihui Song, Shude Ji, Mingshen Li, Zhen Jia, Kang Yang. A Novel Friction Stir Spot Riveting of Al/Cu Dissimilar Materials [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(1): 135-144.
[5]	Xudong Du, Feng Wang, Zhi Wang, Xingxing Li, Zheng Liu, Pingli Mao. Hot Tearing Susceptibility of AXJ530 Alloy Under Low-Frequency Alternating Magnetic Field [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1259-1270.
[6]	Chao-Yue Zhao, Xian-Hua Chen, Peng Peng, Teng Tu, Andrej Atrens, Fu-Sheng Pan. Microstructures and Mechanical Properties of Mg-xAl-1Sn-0.3Mn (x = 1, 3, 5) Alloy Sheets [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1217-1225.
[7]	Dan-Yang Liu, Jin-Feng Li, Yong-Cheng Lin, Peng-Cheng Ma, Yong-Lai Chen, Xu-Hu Zhang, Rui-Feng Zhang. Cu/Li Ratio on the Microstructure Evolution and Corrosion Behaviors of Al-xCu-yLi-Mg Alloys [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1201-1216.
[8]	Yuan Yu, Peiying Shi, Kai Feng, Jiongjie Liu, Jun Cheng, Zhuhui Qiao, Jun Yang, Jinshan Li, Weimin Liu. Effects of Ti and Cu on the Microstructure Evolution of AlCoCrFeNi High-Entropy Alloy During Heat Treatment [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1077-1090.
[9]	Hui Jiang, Tian-Dang Huang, Chao Su, Hong-Bin Zhang, Kai-Ming Han, Sheng-Xue Qin. Microstructure and Mechanical Behavior of CrFeNi₂V_0.5W_x (x = 0, 0.25) High-Entropy Alloys [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1117-1123.
[10]	Ibrahim Ondicho, Bernard Alunda, Dicken Owino, Luke Otieno, Melody Chepkoech. Revealing a Transformation-Induced Plasticity (TRIP) Phenomenon in a Medium-Entropy Alloy [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1159-1165.
[11]	Ren Li, Jing Ren, Guo-Jia Zhang, Jun-Yang He, Yi-Ping Lu, Tong-Min Wang, Ting-Ju Li. Novel (CoFe₂NiV_0.5Mo_0.2)_100-_xNb_x Eutectic High-Entropy Alloys with Excellent Combination of Mechanical and Corrosion Properties [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1046-1056.
[12]	Qiuxin Nie, Hui Liang, Dongxu Qiao, Zhaoxin Qi, Zhiqiang Cao. Microstructures and Mechanical Properties of Multi-component Al_xCrFe₂Ni₂Mo_0.2 High-Entropy Alloys [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1135-1144.
[13]	Chengbo Yang, Jing Zhang, Meng Li, Xuejian Liu. Soft-Magnetic High-Entropy AlCoFeMnNi Alloys with Dual-Phase Microstructures Induced by Annealing [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1124-1134.
[14]	Ning Li, Cun-Lei Jia, Zhi-Wei Wang, Li-Hui Wu, Ding-Rui Ni, Zheng-Kun Li, Hua-Meng Fu, Peng Xue, Bo-Lv Xiao, Zong-Yi Ma, Yi Shao, Yun-Long Chang. Achieving a High-Strength CoCrFeNiCu High-Entropy Alloy with an Ultrafine-Grained Structure via Friction Stir Processing [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(7): 947-956.
[15]	Zhigang Zhang, Xiaotong Lu, Jianrong Xu, Hongjie Luo. Characterization and Tribological Properties of Graphene/Copper Composites Fabricated by Electroless Plating and Powder Metallurgy [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(7): 903-912.