[1] |
Yan-Sen Hao, Wan-Chun Liu, Zhen-Yu Liu.
Microstructure Evolution and Strain-Dependent Constitutive Modeling to Predict the Flow Behavior of 20Cr-24Ni-6Mo Super-Austenitic Stainless Steel During Hot Deformation
[J]. Acta Metallurgica Sinica (English Letters), 2018, 31(4): 401-414.
|
[2] |
Rui Wang, Hai-Juan Mei, Ren-Suo Li, Quan Zhang, Teng-Fei Zhang, Qi-Min Wang.
Friction and Wear Behavior of AlTiN-Coated Carbide Balls Against SKD11 Hardened Steel at Elevated Temperatures
[J]. Acta Metallurgica Sinica (English Letters), 2018, 31(10): 1073-1083.
|
[3] |
Jun Tian, Yu Yang, Zhang Li Ping, Shao Xue Jiao, Juan Du, Kan Qian Hua.
Ratcheting Behavior of SA508-3 Steel at Elevated Temperature:Experimental Observation and Simulation
[J]. Acta Metallurgica Sinica (English Letters), 2017, 30(9): 822-828.
|
[4] |
Bao-Sheng Xie,Qing-Wu Cai,Wei Yu,Li-Xiong Xu,Zhen Ning.
Prediction for Flow Stress of 95CrMo Hollow Steel During Hot Compression
[J]. Acta Metallurgica Sinica (English Letters), 2017, 30(3): 250-260.
|
[5] |
Shi-Hong Zhang, Shuai-Feng Chen, Yan Ma, Hong-Wu Song, Ming Cheng.
Developments of New Sheet Metal Forming Technology and Theory in China
[J]. Acta Metallurgica Sinica (English Letters), 2015, 28(12): 1452-1470.
|
[6] |
Leyang DAI.
Behavior of Fe Powder During High-Energy Ball Milling Cooperated with Dielectric Barrier Discharge Plasma
[J]. Acta Metallurgica Sinica (English Letters), 2013, 26(1): 63-68.
|
[7] |
Yujie LIU, Qing GAO and Guozheng KANG.
A damage-coupled multi-axial time-dependent low cycle fatigue failure model for SS304 stainless steel at high temperature
[J]. Acta Metallurgica Sinica (English Letters), 2011, 24(2): 169-174.
|
[8] |
Xiaohua ZHANG,Daoxin LIU.
Effects of temperature, slip amplitude, contact pressure on fretting fatigue behavior of Ti811 alloys at elevated temperatures
[J]. Acta Metallurgica Sinica (English Letters), 2009, 22(2): 131-137.
|
[9] |
Z.M. Zhang, C.J. Xu, X.F. Guo, S.Z. Jia.
Reciprocating Extrusion Of In Situ Mg 2 Si Reinforced Mg-Al Based Composite
[J]. Acta Metallurgica Sinica (English Letters), 2008, 21(3): 169-177 .
|
[10] |
G.S. Fu, W.Z. Chen , K.W. Qian.
BEHAVIOR OF FLOW STRESS OF ALUMINUM SHEETS USED FOR PRESSURE CAN DURING COMPRESSION AT ELEVATED TEMPERATURE
[J]. Acta Metallurgica Sinica (English Letters), 2005, 18(6): 756-762 .
|
[11] |
W.Huang, X.Nie, X.Zan, Y.M.Xia.
DYNAMIC TENSILE BEHAVIOR OF 5CrMnMo AT ELEVATED TEMPERATURES
[J]. Acta Metallurgica Sinica (English Letters), 2004, 17(4): 521-527 .
|
[12] |
Y.Q.Wu.
A STUDY OF RATE-DEPENDENCE AT ELEVATED TEMPERATURE FOR AN AI-Cu-Mg ALLOY
[J]. Acta Metallurgica Sinica (English Letters), 2004, 17(4): 618-624 .
|
[13] |
G.Z. Kang; Q. Gao, X.J.Yang and Y.F. Sun(Department of Applied Mechanics and Engineering, Southwest Jiaotong University, Chengdu 610031, China).
THE STRAIN CYCLIC CHARACTERISTICS AND RATCHETING OF U71Mn RAIL STEEL UNDER UNIAXIAL LOADING
[J]. Acta Metallurgica Sinica (English Letters), 2000, 13(3): 893-900.
|