REVIEW AND PROSPECT OF HIGH STRENGTH LOW ALLOY TRIP STEEL

Abstract

Abstract: Research status of high strength low alloy TRIP (transformation induced plasticity) steels for automobile structural parts is briefly described. Composition and microstructure factors especially the morphology, size and volume fraction of retained austenite,which largely influence the strength and ductility of the steel, are reviewed and discussed one after another. Modelling of the inter-critical annealing and martempering processes as well as the designing of the TRIP steel aided by commercial software are introduced. Some special aspects of the dynamic mechanical properties of TRIP steel are firstly reported.

Key words:

L.Li, P.Wollants, Y.L.He, B.C.DeCooman, X.C.Wei, Z.Y.Xu. REVIEW AND PROSPECT OF HIGH STRENGTH LOW ALLOY TRIP STEEL[J]. Acta Metallurgica Sinica (English Letters), 2003, 16(6): 457-465 .

References

1 O. Matsumura, Y. Sakuma and H. Takechi, Trans. ISIJ 27(4) (1987) 570．
2 A.K. Sinha, Ferrous Physical Metallurgy (Butterworths, London, 1989) p.324．
3 V.F. Zackay, E.R. Parker and D. Fahr, Trans. of ASM 60(2) (1967) 252．
4 H.S. Fang, J.J. Wang and Z.G. Yang, Bainite Transformation(Science Press, Beijing, 1999) p.358(in Chinese).
5 S.K. Liu and J. Zhang, Metall. Trans. 21A(4) (1990) 1517．
6 A. Zarei Hanzaki, P.D. Hodgson and S. Yue, Metall. Trans. 28A(11) (1997) 2405．
7 M.D. Meyer, D. Vanderschueren and B.C. De Cooman, ISIJ Int. 139(8) (1999) 813．
8 A. Pichler and P. Stirszny, Steel Res. 70(11) (1999) 459．
9 P. Jacques, X. Cornet, Ph. Harlet and J. Ladriere, Metall. Trans. 29A(11) (1998) 2383．
10 M. Bouet, J. Root, E. Es-Sadiqi and S. Yue, Mat. Sci. Forum. 284 (1998) 319．
11 K. Eberle, P. Cantinieaux and P. Hariet, Steel Res. 70(6) (1999) 233．
12 L. Li, B.C. De Cooman, P. Wollants, Y.L. He and X.D. Zhou, J. Mater. Sci. & Technol. (2004) (in press).
13 Y. Sakuma, D.K. Matlock and G. Krauss, Metall. Trans. 23A(4) (1992) 1233．
14 I. Tsukatani, S. Hashimoto and T. Inoue, ISIJ Int. 31(9) (1991) 992．
15 K. Sugimoto, N. Usui and M. Kobayashi, ISIJ Int. 32(12) (1992) 1311．
16 K. Sugitomo, A. Nagasaka and M. Kobayashi, ISIJ Int. 39(1) (1999) 56．
17 A. Zarei Hanzaki, P.D. Hodgson and S. Yue, in 34th MWSP Conf. Proc. (Vol.ⅩⅩⅩ, ISS-AIME, USA,1993) p.507．
18 A. Zarei Hanzaki, P.D. Hodgson and S. Yue, ISIJ Int. 35(3) (1995) 324．
19 A. Zarei Hanzaki, P.D. Hodgson and S. Yue, in The 33rd MWSP, Conf. Proc. (Vol. ⅩⅩⅨ, ISS-AIME,USA, 1992) p.459．
20 K. Sugitomo, M. Kobayashi and H. Shirsawa, ISIJ Int. 33(7) (1993) 775．
21 A. Di Chiro, J. Root and S. Yue, in The 37th MWSP Conf. Proc. (Vol. ⅩⅩⅩⅢ, ISS-AIME, USA,1996) p.373．
22 G.N. Haidemenopoulos and A.N. Vasilakos, Steel Research 67(11) (1996) 513．
23 G.B. Olson, and M. Cohen, Metall. Trans. 7A (1976) 1897．
24 A. Zarei Hanzaki, P.D. Hodgson and S. Yue, ISIJ Int. 37(6) (1997) 583．
25 Y. Sakuma, O. Matsumura and H. Takechi, Metall. Trans. 22A(2) (1991) 489．
26 Y. Sakuma, O. Matsumura and O. Akisue, ISIJ Int. 31(9) (1991) 1348．
27 O. Kawano, J. Haji, J. Wakita and K. Esaka, Microstructural Evolution in Metals Processing (American Society of Mechanical Engineers, New York, 1990) p.11．
28 T. Minoto, S. Torizuka, A. Ogawa and M. Nikura, ISIJ Int. 36(2) (1996) 201．
29 Y. Sakuma, D. K. Matlock and G. Krauss, Metall. Trans. 23A(4) (1992) 1221．
30 L. Li, W. Shi, R.Y. Fu and L.P. Xu, in HSLA Steels' 2000, eds. X.J. Wang and Z.B. Wang (Mechanical Industry Press, Beijing, 2000) p.299 (in Chinese).
31 L. Li, P. Wollants, Z.Y. Xu, B.C. De Cooman and X.T. Zhou, J. Mater. Sci. & Technol. 23(3) (2003) 273．
32 Y. Zhou, W. Shi, X.C. Wei, L. Li, B.C. De Cooman, P. Wollants, X.D. Zhou and L. Wang, in TRIPAided High Strength Ferrous Alloys, ed. B.C. De Cooman (Wissenschafts Verlag Mainz Gmbh, Aachen,2002) p.211．
33 Y. Zhou, L. Li and W. Shi, Transactions of Materials and Heat Treatment 23(1) (2002) 15 (in Chinese).
34 X.C. Wei, L. Li, R.Y. Fu, B.C. De Cooman, P. Wollants, X.D. Zhou and L. Wang, in TRIP-Aided High Strength Ferrous Alloys, ed. B.C. De Cooman (Wissenschafts Verlag Mainz Gmbh, Aachen, 2002) p.253．
35 X.C. Wei, L. Li, R.Y. Fu and W. Shi, Acta Metall. Sin. (Eng. Lett.) 15(3) (2002) 285．

[1]	Yanxin ZHUANG, Jun CHEN, Puwei WANG, Jicheng HE. Effect of Ni on the formation and thermal behavior of NdAlCo metallic glasses [J]. Acta Metallurgica Sinica (English Letters), 2011, 24(4): 281-286.
[2]	Nian LIU, Guodong ZHANG. Optimal design of self-propagating high temperature one-dimensional nano-SnO₂ synthesis [J]. Acta Metallurgica Sinica (English Letters), 2011, 24(4): 321-325.
[3]	Jiuhui LI, Xing ZHAO,Dongsheng WANG, Fanshun MENG. The Effect of Si Impurity at the Al ∑5 Grain Boundary: a First Principle Computational Tensile Test Study [J]. Acta Metallurgica Sinica (English Letters), 2013, 26(6): 675-680.
[4]	Chenfan Yu, Yuan Zhong, Peng Zhang, Zhenjun Zhang, Congcong Zhao, Zhefeng Zhang, Zhijian Shen, Wei Liu. Effect of Build Direction on Fatigue Performance of L-PBF 316L Stainless Steel [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(4): 539-550.
[5]	S.C. Fan, B.K. Li, J.C. He. MOTIONS OF ALLOYING ADDITIONS IN GAS STIRRED LADLES [J]. Acta Metallurgica Sinica (English Letters), 2001, 14(5): 359-367 .
[6]	X.G.Min, X.Q.Yu, Y.S.Sun. MICROSTRUCTURES AND OXIDATION RESISTANCE OF Fe3Al WELD OVERLAY [J]. Acta Metallurgica Sinica (English Letters), 2001, 14(4): 253-256 .
[7]	J. Huang , Z. Xu. HOT DEFORMATION AND MARTENSITIC TRANSFORMATION BEHAVIORS OF Fe-32%Ni ALLOY [J]. Acta Metallurgica Sinica (English Letters), 2006, 19(2): 133-138 .
[8]	Y.Y. Zhu, S.H. Liang, Z.J. Zhan. Simulation of the Change of Sintering Neck between Two Grains in Two Dimensions [J]. Acta Metallurgica Sinica (English Letters), 2006, 19(6): 397-404 .
[9]	K.R.Liu, J.S.Chen, Q.Han, X.J.Wei. STUDY OF ANODIC OVERVOLTAGE IN NEODYMIUM ELECTROLYSIS [J]. Acta Metallurgica Sinica (English Letters), 2003, 16(5): 355-359 .
[10]	B.Yu Y.J.Zhang, Z.X.Zhao, F.X.Zhao, Q.K.Cai, C.S.Liu. THE REINFORCING MECHANISM OF TiB2 IN TiB2／A357 COMPOSITE [J]. Acta Metallurgica Sinica (English Letters), 2003, 16(5): 375-378 .
[11]	Li-Mei Liu, Yu-Xiang Lai, Chun-Hui Liu, Jiang-Hua Chen. Optimized Combinatorial Properties of an AlMgSi(Cu) Alloy Achieved by a Mechanical-Thermal Combinatorial Process [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(5): 751-758.
[12]	Rui-Xuan Li, Jun-Wei Qiao, Peter K. Liaw, Yong Zhang. Preternatural Hexagonal High-Entropy Alloys: A Review [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1033-1045.
[13]	Tao Liu, Yuejiao Chen, Libao Chen. 3D Printing Engineered Multi-porous Cu Microelectrodes with In Situ Electro-Oxidation Growth of CuO Nanosheets for Long Cycle, High Capacity and Large Rate Supercapacitors [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(1): 85-97.
[14]	Jiahua Zhang, Yi Yang, Sheng Cao, Zhiqiang Cao, Dmytro Kovalchuk, Songquan Wu, Enquan Liang, Xi Zhang, Wei Chen, Fan Wu, Aijun Huang. Fine equiaxed β grains and superior tensile property in Ti-6Al-4V alloy deposited by coaxial electron beam wire feeding additive manufacturing [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(10): 1311-1320.
[15]	Xuyang Wang, Jieren Yang, Rui Hu, Zitong Gao, Jinguang Li, Hengzhi Fu. Creep-Induced Phase Instability and Microstructure Evolution of a Nearly Lamellar Ti-45Al-8.5Nb-(W, B, Y) Alloy [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1591-1600.