1 R.L. Kluch, D.S. Gelles, M. Okada and N.H. Packan, ASTM STP No. 1047 (PA, 1990) p.1. 2 R.W. Com, Report of the DOE Panel on Low Activation Materials for Fusion Applications (June, 1983) UCLA/PPG-728. 3 C.C. Jia, L. Lu and B.F. Hu, J. Trans. of Metal Heat Treatment 21(1) (2000) 12 (in Chinese). 4 B.F. Hu, L. Lu and C.C. Jia, J. Trans. of Metal Heat Treatment (21) (2000) 22 (in Chinese). 5 K. Ohnishi and J. Ishizaka, J. of the Iron and Steel Institute of Japan 63(14) (1977) 2362. 6 K. Miyahara, D.S. Bae and H. Staka, in Conf. Aspects of High Temperature Deformation and Fracture in Crystalline Materials, ed. R.A. Lula (Nagoya, Japan, Vol.28-31(7), 1993) p.230. 7 J.I. Cole, J.J. Hoyt and D.S. Gelles, J. Nucl. Mater. 191-194 (1992) 657. 8 F.A. Garner, H.R. Brager, D.S. Gelles and H. Takahashi, J. Nucl. Mater. 148 (1987) 294. 9 F.A. Garner, F. Abe and T. Noda, J. Nucl. Mater. 155-157 (1988) 870. 10 J.M. McCarthy and F.A. Garner, J. Nucl. Mater. 155-157 (1988) 877. 11 E. Garstein and A. Rabinkin, Ada Met. 27 (1979) 1053. 12 Y. Tomota, S. Strum and J.W. Morris, Met. Trans. 17A (1986) 537. 13 K. Miyahara, J. Inami, Y. Shimoide and Y. Hosoi, in Proc. of Inter. Conf. on Stainless Steels (Chiba, ISIJ, 1991) P771. 14 Y. Okazaki, K. Miyahara and Y Hosoi, J. Japan Inst. Met. 53 (1989) 512. 15 C.C. Jia, I. Kiyohito and N. Taiji, Chinese Journal of Rare Metals 23(134) (1999) 384 (in Chinese). 16 H. Hillert and L.I. Staffansson, Acta Chem. Scand. (24) (1970) 3618. 17 O. Redlich and A.T. Kister, Ind. Eng. Chem. (40) (1948) 345. 18 A. Dinsdale, NPL Report DMA (A) 195 Rev. (1990) p.8. 19 J.O. Andersson and B. Sundman, Calphad 11 (1987) 83. 20 NPL, Cr-Mn (1989, unpublished work). 21 W. Huang, Calphad 13 (1989) 243. 22 A. Dinsdale, NPL Report DMA (A) 195 Rev. (1989) p.9. 23 J.O. Andersson, Met. Trans. A 19A (1988) 1385. 24 K. Frisk, Metall. Trans. 21A (1990) 2477. 25 J. Johnson, J. of Inst. of Metals 95(12) (1967) 379.w |