Study on the Finite Element Numerical Simulation of Sheet Metal Forming

Abstract

Abstract: Based on the Finite Element Theory of Rigid Plastic, relevant problems during plastic simulation on sheet metal forming were technologically studied and simplified; a simplified model of the blank holder during the drawing process was established and the effects of related parameters on the forming processes were also studied. At the same time, a finite-element numerical simulation program SPID was developed. The distribution of strain and relationship of stress-stroke simulated were compared with experimented, the results are well coincided with each other. It is verified that the analytical program is reliable.

Key words: sheet metal forming, finite-element, numerical simulation

J.L. Song, D.J. Hu, Z.L. Chang, T.Y. Li , Z.B. Jiang. Study on the Finite Element Numerical Simulation of Sheet Metal Forming[J]. Acta Metallurgica Sinica (English Letters), 2004, 17(3): 299-302 .

[1]	Zhen-Hu Duan, Hou-Fa Shen, Bai-Cheng Liu. A Numerical Study of the Effect of Multiple Pouring on Macrosegregation in a 438-Ton Steel Ingot [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(9): 1123-1133.
[2]	Chetan P. Nikhare. Prediction of Springback in Long Channels [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(12): 1525-1531.
[3]	Zu-Qi Hu, Xin-Jian Zhang, Shu-Sen Wu. Microstructure, Mechanical Properties and Die-Filling Behavior of High-Performance Die-Cast Al-Mg-Si-Mn Alloy [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(11): 1344-1353.
[4]	Zhenmin WANG, Fang YAN,Pengcheng ZHAO. Numerical Simulation of the Dynamic Behaviors of a Gas Tungsten Welding Arc for Joining Magnesium Alloy AZ61A [J]. Acta Metallurgica Sinica (English Letters), 2013, 26(5): 588-596.
[5]	Dean DENG, Yangang TONG, Ninshu MA, Hidekazu MURAKAWA. Prediction of the Residual Welding Stress in 2.25Cr-1Mo Steel by Taking into Account the Effect of the Solid-State Phase Transformations [J]. Acta Metallurgica Sinica (English Letters), 2013, 26(3): 333-339.
[6]	Guoxiang XU, Chuansong WU, Xuezhou MA, Xuyou WANG. Numerical Analysis of Welding Residual Stress and Distortion in Laser+GMAW Hybrid Welding of Aluminum Alloy T-Joint [J]. Acta Metallurgica Sinica (English Letters), 2013, 26(3): 352-360.
[7]	Junqiu ZHANG, Zhiwu HAN,Wei YIN, Huiyuan WANG,Chao GE, Jialian JIANG. Numerical Experiment of the Solid Particle Erosion of Bionic Configuration Blade of Centrifugal Fan [J]. Acta Metallurgica Sinica (English Letters), 2013, 26(1): 16-24.
[8]	Wen ZHENG,Min WANG,Liang KONG,Xuanting CHENG,Ming LEI . Parameter optimization of dissimilar resistance spot welding on ultra-high strength hot-stamped steel and mild steel by numerical simulation [J]. Acta Metallurgica Sinica (English Letters), 2012, 25(6): 487-498.
[9]	Prosenjit Das, Sudip K. Samanta, Himadri Chattopadhyay,Pradip Dutta. Effect of pouring temperature on cooling slope casting of semi-solid Al-Si-Mg alloy [J]. Acta Metallurgica Sinica (English Letters), 2012, 25(5): 329-339.
[10]	Shude JI,AiliZOU, Yumei YUE, Guohong LUAN,Yanye JIN, Fu LI. Numerical simulation of effect of rotational tool with screw on material flow behavior of friction stir welding of Ti6Al4V alloy [J]. Acta Metallurgica Sinica (English Letters), 2012, 25(5): 365-373.
[11]	Haichao CUI, Fenggui LU, Xinhua TANG,Shun YAO. Particles migration behavior during laser keyhole welding of ZL101/TiB₂ composites [J]. Acta Metallurgica Sinica (English Letters), 2012, 25(3): 190-200.
[12]	Dongrong LIU, Xiuhong KANG, Baoguang SANG, Dianzhong LI. Numerical study of macrosegregation formation of ingot cast in normal sand mold and water-cooled sand mold [J]. Acta Metallurgica Sinica (English Letters), 2011, 24(1): 54-64.
[13]	Huaping TANG, Changqian HAO, Yongzheng JIANG, Lei DU. Forming process and numerical simulation of making upset on oil drill pipe [J]. Acta Metallurgica Sinica (English Letters), 2010, 23(1): 72-80.
[14]	Haipeng JIN,Jiarong LI,Dong PAN. Application of inverse method to estimation of boundary conditions during investment casting simulation [J]. Acta Metallurgica Sinica (English Letters), 2009, 22(6): 429-434.
[15]	Dashan SUI,Zhenshan CUI. Application of orthogonal experimental design and Tikhonov regularization method for the identification of parameters in the casting solidificationp rocess [J]. Acta Metallurgica Sinica (English Letters), 2009, 22(1): 13-21.

Study on the Finite Element Numerical Simulation of Sheet Metal Forming

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments