Acta Metallurgica Sinica (English Letters) ›› 2003, Vol. 16 ›› Issue (2): 114-121 .

• Research Articles • Previous Articles     Next Articles

PURIFICATION OF COBALT ANOLYTE USING THE NOVEL SOLVENT EXTRACTION SYSTEM

Y.F.Shen[1], W.Y.Xue[2], W.Y.Niu[2]   

  1. [1]JinchuanNon-ferrousMatalsComplex,Jinchuan737100,China [2]StateKeyLaboratoryofRollingandAutomation,NortheasternUniversity,Shenyang110014,China
  • Received:2002-04-24 Revised:2002-11-12 Online:2003-04-25 Published:2009-10-10
  • Contact: Y.F.Shen

Abstract: In present research,a novel extractant system(D2EHPA+naphthenic acid+pyridine-ester) was used to purify cobalt anolyte and a simulated industrial produc-tion were carried out.This novel extraction system can extract Cu and/or Ni against Co from chloride medium solutions at pH range of 2.5-4.5.About 2g/l nickel and 0.2g/l copper were removed from the cobalt chloride anolyte containing about 100g/l cobalt and 200g/l chloride ions respectively,the raffinate contains nickel and copper less than 0.03g/l and 0.0003g/l respectively and can be used to electrolyze high-purity cobalt.About 5.5t cobalt anolyte was purified in the simulation industrial experiment and kilogram quantities of cobalt of 99.9809CDAC7Curity and about 95recovery have been produced.

Key words: solvent extraction, nickel, cobalt,