PRESS FORMABILITY OF YAG LASER WELDED TRIP STEEL SHEETS

Acta Metallurgica Sinica (English Letters) ›› 2002, Vol. 15 ›› Issue (1): 21-25 .

• Research Articles • Previous Articles Next Articles

PRESS FORMABILITY OF YAG LASER WELDED TRIP STEEL SHEETS

A.Nagasaka

Department of Mechanical Engineering, Nagano National College of Technology, 716 Tokuma, Nagano 381-8550, Japan

Received:2002-07-31 Revised:1900-01-01 Online:2002-02-15 Published:2009-10-10
Contact: A.Nagasaka

Abstract

Abstract: The effects of YAG laser welding conditions on mechanical properties and pressformability (bendability, stretch-formability and deep drawability) of high-strengthtransformation-induced plasticity-aided dual-phase (TDP) steel were investigated.Tensile tests and press forming tests have been conducted for laser butt welded jointsbetween two pieces of the same steel. The tensile property and press formability wereaffected by the welding speed of 100 to 1100mm/min and the energy of 6 to 9J/pulse.Excellent press formability was obtained with the energy of 6J/pulse and the weldingspeed of 300mm/min. It was concluded that the excellent weldability of the TDP steelcan be ascribed to the weld joint formation.

Key words: YAG laser welding, retained austenite, transformation-inducedplasticity

A.Nagasaka. PRESS FORMABILITY OF YAG LASER WELDED TRIP STEEL SHEETS[J]. Acta Metallurgica Sinica (English Letters), 2002, 15(1): 21-25 .

[1]	Yong-Han Li, Zhong-Hua Jiang, Zhen-Dan Yang, Jue-Shun Zhu. Effect of Indirect Transformation of Retained Austenite During Tempering on the Charpy Impact Toughness of a Low-Alloy Cr-Mo-V Steel [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(10): 1346-1358.
[2]	Yang Zhao, Wen-Ting Zhu, Shu Yan, Li-Qing Chen. Effect of Microstructure on Tensile Behavior and Mechanical Stability of Retained Austenite in a Cold-Rolled Al-Containing TRIP Steel [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(10): 1237-1243.
[3]	Feng Wang, Dong-Sheng Qian, Xiao-Hui Lu. Effect of Prior Cold Deformation on the Stability of Retained Austenite in GCr15 Bearing Steel [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(1): 107-115.
[4]	Erfan Abbasi, Quanshun Luo, Dave Owens. Microstructural Characteristics and Mechanical Properties of Low-Alloy, Medium-Carbon Steels After Multiple Tempering [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(1): 74-88.
[5]	Shao-Heng Sun, Ai-Min Zhao, Ran Ding, Xiao-Gang Li. Effect of Heat Treatment on Microstructure and Mechanical Properties of Quenching and Partitioning Steel [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(2): 216-224.
[6]	Hui-Yan Li,Chao-Fang Dong,Kui Xiao,Xiao-Gang Li,Ping Zhong. Relationship Between Microstructure and Corrosion Behavior of Cr12Ni3Co12Mo4W Ultra-High-Strength Martensitic Stainless Steel [J]. Acta Metallurgica Sinica (English Letters), 2016, 29(11): 1064-1072.
[7]	Ri-Ming Wu, Wei Li, Cheng-Lin Wang, Yi Xiao, Li Wang, Xue-Jun Jin. Stability of Retained Austenite Through a Combined Intercritical Annealing and Quenching and Partitioning (IAQP) Treatment [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(3): 386-393.
[8]	Zhao Yang, Yan Qiangjun, Chen Liqing, Yuan Xiaoyun. Effect of Isothermal Temperature on Microstructure and Mechanical Properties of High Al–Low Si TRIP Steel [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(3): 389-394.
[9]	Hao Qingguo, Wang Ying, Jia Xiaoshuai, Zuo Xunwei, Chen Nailu, Rong Yonghua. Dynamic Compression Behavior and Microstructure of a Novel Low-Carbon Quenching-Partitioning-Tempering Steel [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(3): 444-451.
[10]	Wang Chao, Ding Hua, Zhang Jun, Wu Hongyan. Effect of Intercritical Annealing Time on the Microstructures and Tensile Properties of a High Strength TRIP Steel [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(3): 457-463.
[11]	B. R. Shendy, M. N. Yoozbashi, B. Avishan,S. Yazdani. An Investigation on Rotating Bending Fatigue Behavior of Nanostructured Low-Temperature Bainitic Steel [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(2): 233-238.
[12]	Huifang Lan,Linxiu Du,Na Zhou,Xianghua Liu. Effect of Austempering Route on Microstructural Characterization of Nanobainitic Steel [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(1): 19-26.
[13]	C.H. Surberg, P. Stratton, K. Lingenhole. Effect of deep cold treatment on two case hardening steels [J]. Acta Metallurgica Sinica (English Letters), 2008, 21(1): 1-7 .
[14]	Y.Chern. THE CHARACTERISTICS OF MICROSTRUCTURES AND PROPERTIES FOR ADVANCED ALUMINUM／SILICON CONTAINED HOT-ROLLED TRIP STEELS [J]. Acta Metallurgica Sinica (English Letters), 2004, 17(6): 823-829 .
[15]	Z.Li, D.Wu. MECHANICAL PROPERTIES IN AN INTERCRITICALLY HEAT-TREATED BAINITE-TRANSFORMED 2i STEEL [J]. Acta Metallurgica Sinica (English Letters), 2004, 17(5): 725-731 .

PRESS FORMABILITY OF YAG LASER WELDED TRIP STEEL SHEETS

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments