FACTORS INFLUENCING THE WEAR BEHAVIOR OF PM STEELS

Abstract

Abstract: A review was made on the research progress of wear behavior of PM steels in recentyears. Wear is not an intrinsic property of PM steels, which is strongly influencedby the wear test conditions. However, many other factors that determine the me-chanical properties of PM steels also affect the wear behavior. Porosity has differenteffects on the wear of PM steels depending on the application conditions. Under drysliding condition, higher porosity results in lower wear resistance. The influence ofmicrostructures on wear resistance was in the order: carbide, martensite, bainite andlamellar pearlite. The wear resistance increases with hardness, but this relationshipchanges with the porosity and microstructures of PM steels.``

Key words: wear, PM steel, porosity, microstructure, hardness

J.A. Wang. FACTORS INFLUENCING THE WEAR BEHAVIOR OF PM STEELS[J]. Acta Metallurgica Sinica (English Letters), 2001, 14(1): 33-41 .

References

1 A. Huetenhuber, Metal Powder Rep. 47 (1992) 16.
2 S.C. Lim and M.F. Ashby, Acta Metall. 35 (1987) 1.
3 H. Danninger, D. Spoljaric, A. Arakil and B. Weiss, Adv. Powder Metall. & Particulate Mater. 13(1996) 177.
4 C. Amsallem, A. Gaucher and G. Guilhot, Wear 23 (1973) 97.
5 M. Vardavoulias, C. Jouanny-Tresy and M. Jeandin, Wear 165 (1993) 141.
6 J. Wang and H. Danninger, Wear 222 (1998) 49.
7 S.C. Lim and J.H. Brunton, Wear 113 (1986) 371.
8 J. Wang and H. Danninger, Molybdenum alloyed PM steels for wear loaded parts", PM Auto'99,organized by Mashad Powder Metallurgy (MPM), Iran, April 1999.
9 H. Danninger, G. Jangg, B. Weiss and R. Stickler, Powder Metall. Int. 25(3) (1993) 111.
10 K.-H. Zum Gahr, Microstructure and Wear of Materials (Elsevier, Amsterdam, 1987) p.10
11 C.A. Keyser, Materials Science in Engineering (Charles E. Merrill, OH, 1986) p.244.
12 M. Aksoy, V. Kuzucu and M.H. Korkut, Wear 211 (1997) 265.
13 J. Larsen-Badse and K.G. Mathew, Wear 14 (1969) 199.
14 C.G. Li, Q.D. Zhou, G.S. Song and Z.S. Fang, Wear 162-164 (1993) 75.
15 G.H. Yang and W.M. Garrison, Jr., Wear 129 (1989) 93.
16 H.-J. Kim and Y.-G. Kweon, Wear 193 (1996) 8.
17 J.J. Tervo, Acta Polytechnica Scandinavica, Mechanical Engineering Series, 128 (1998) 2.
18 Y. Sun and T. Bell, Wear 218 (1998) 34.
19 J.E. Garnham and J.H. Beynon, Wear 157 (1992) 81.
20 J. Kalousek, D.M. Fegredo and E.E. Laufer, Wear 105 (1985) 199.
21 N. Jin and P. Clayton, Wear 2O2 (1997) 202.
22 L. Xu and N.F. Kennon, Wear 148 (1991) 101.
23 A.M. El-Rakayby and B. Mills, Mater. Sci. Technol. 2 (1986) 175.
24 P. Clayton, Wear 60 (1980) 75.
25 M. Vardavoulias, M. Jeandin and F. Grillon, Scr. Metall. Mater. 29(3) (1993) 359.
26 M. Vardavoulias, Wear 173 (1994) 105.
27 Y. Wang and T. Lei, Wear 194 (1996) 44.
28 M.M. Khrushor, Wear 28 (1974) 69.
29 G.J. Gore and J.D. Gates, Wear 2O3-2O4 (1997) 544.
30 P. Clayton, K.J. Sawley, P.J. Bolton and G.M. Pel, Wear 12O (1987) 199.
31 P.H. Shipway, S.J. Wood and A.H. Dent, Wear 2O3-2O4 (1997) 196.
32 D.A. Rigney, Wear 175 (1994) 63.
33 M. Godet, Wear 136 (1990) .29.
34 D.W. Borland and S. Bian, Wear 2O9 (1997) 171.;

[1]	L. B. Tong, J. H. Chu, D. N. Zou, Q. Sun, S. Kamado, H. G. Brokmeier, M. Y. Zheng. Simultaneously Enhanced Mechanical Properties and Damping Capacities of ZK60 Mg Alloys Processed by Multi-Directional Forging [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(2): 265-277.
[2]	Chun-Hua Ma, Fu-Sheng Pan, Ding-Fei Zhang, Ai-Tao Tang, Zhi-Wen Lu. Effects of Sb Addition on Microstructural Evolution and Mechanical Properties of Mg-9Al-5Sn Alloy [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(2): 278-288.
[3]	Meichen Liang, Hao Zhang, Lifeng Zhang, Peng Xue, Dingrui Ni, Weizhen Wang, Zongyi Ma, Hengqiang Ye, Zhiqing Yang. Evolution of Quasicrystals and Long-Period Stacking Ordered Structures During Severe Plastic Deformation and Mixing of Dissimilar Mg Alloys Upon Friction Stir Welding [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(1): 12-24.
[4]	Jinglin Liu, Qi Song, Lihui Song, Shude Ji, Mingshen Li, Zhen Jia, Kang Yang. A Novel Friction Stir Spot Riveting of Al/Cu Dissimilar Materials [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(1): 135-144.
[5]	Chao-Yue Zhao, Xian-Hua Chen, Peng Peng, Teng Tu, Andrej Atrens, Fu-Sheng Pan. Microstructures and Mechanical Properties of Mg-xAl-1Sn-0.3Mn (x = 1, 3, 5) Alloy Sheets [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1217-1225.
[6]	Tianbo Zhao, Yutaka S. Sato, Hiroyuki Kokawa, Kazuhiro Ito. Predicting Tensile Properties of Friction-Stir-Welded 6063 Aluminum with Experimentally Measured Welding Heat Input [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1235-1242.
[7]	Dan-Yang Liu, Jin-Feng Li, Yong-Cheng Lin, Peng-Cheng Ma, Yong-Lai Chen, Xu-Hu Zhang, Rui-Feng Zhang. Cu/Li Ratio on the Microstructure Evolution and Corrosion Behaviors of Al-xCu-yLi-Mg Alloys [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1201-1216.
[8]	Xudong Du, Feng Wang, Zhi Wang, Xingxing Li, Zheng Liu, Pingli Mao. Hot Tearing Susceptibility of AXJ530 Alloy Under Low-Frequency Alternating Magnetic Field [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1259-1270.
[9]	Jinling Lu, Zhenjiang Wang, Wei Wang, Kexuan Zhou, Feng He, Zhijun Wang. Superior Slurry Erosion Behavior of a Casting NiCoCrFeNb_0.45 Eutectic High Entropy Alloy [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1111-1116.
[10]	Chengbo Yang, Jing Zhang, Meng Li, Xuejian Liu. Soft-Magnetic High-Entropy AlCoFeMnNi Alloys with Dual-Phase Microstructures Induced by Annealing [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1124-1134.
[11]	Yuan Yu, Peiying Shi, Kai Feng, Jiongjie Liu, Jun Cheng, Zhuhui Qiao, Jun Yang, Jinshan Li, Weimin Liu. Effects of Ti and Cu on the Microstructure Evolution of AlCoCrFeNi High-Entropy Alloy During Heat Treatment [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1077-1090.
[12]	Hui Jiang, Tian-Dang Huang, Chao Su, Hong-Bin Zhang, Kai-Ming Han, Sheng-Xue Qin. Microstructure and Mechanical Behavior of CrFeNi₂V_0.5W_x (x = 0, 0.25) High-Entropy Alloys [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1117-1123.
[13]	Ibrahim Ondicho, Bernard Alunda, Dicken Owino, Luke Otieno, Melody Chepkoech. Revealing a Transformation-Induced Plasticity (TRIP) Phenomenon in a Medium-Entropy Alloy [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1159-1165.
[14]	Qiuxin Nie, Hui Liang, Dongxu Qiao, Zhaoxin Qi, Zhiqiang Cao. Microstructures and Mechanical Properties of Multi-component Al_xCrFe₂Ni₂Mo_0.2 High-Entropy Alloys [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1135-1144.
[15]	Ren Li, Jing Ren, Guo-Jia Zhang, Jun-Yang He, Yi-Ping Lu, Tong-Min Wang, Ting-Ju Li. Novel (CoFe₂NiV_0.5Mo_0.2)_100-_xNb_x Eutectic High-Entropy Alloys with Excellent Combination of Mechanical and Corrosion Properties [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1046-1056.