DISCUSSION ON DEFECTS DISTRIBUTION NEAR THE STEEL SURFACE IRRADIATED BY INTENSE PULSED ION BEAM

Abstract

Abstract: The surface defect distribution in stainless steel irradiated with intense pulsed ion beam(IPIB) of current density above 60A/cm2 and acceleration voltage 300-500keV wasdiscussed and analyzed. The defects near the surface of stainless steel were generatedin two ways: (1) generated by the bombardment of energetic ions and (2) induced bythe high level stress near the surface. Thus the temperature and stress distributionsnear the steel surface were calculated by means of our STEIPIB code, which treatedwith the thermal-dynamical process in the target irradiated by the IPIB. Based onthese distributions, the generations and movements of these defects were discussedand compared with the experiment results.

Key words: IPIB, defect, coupled fluid elastoplastic equation

X.Y.Le, S.Yan, W.J.Zhao. DISCUSSION ON DEFECTS DISTRIBUTION NEAR THE STEEL SURFACE IRRADIATED BY INTENSE PULSED ION BEAM[J]. Acta Metallurgica Sinica (English Letters), 2002, 15(1): 113-118 .

References

1 M. Crawford, New Technology Week (Sept. 20, 1993).
2 D.J. Rej, R.R. Bartsch, H.A. Davis, R.J. Faehl, J.B. Greenly and W.J. Waganaar, Rev. Sci. Instru. 64 (1993) 2753.
3 B.P. Wood, I. Henins, W.A. Reass, D.J. Rej, H.A. Davis, W.J. Waganaar, R.E. Muenchausen, G.P. Johnston and H.K. Schmidt, NIM B 96 (1995) 429.
4 H.A. Davis, B.P. Wood, C.P. Munson, L.J. Bitterker, M.A. Nastasi, D.J.Rej, W.J. Waganaar, K.C. Walter, D.M. Coates and H.M. Schleinitz, Materials Chemistry and Physics 54 (1998) 213.
5 G.E. Remnev and V.A. Shulov, Laser and Particle Beams 11 (1993) 707.
6 E.L. Neau, CP392, Application of Acceleratore in Research and Industry (AIP Press, 1997) p.1171.
7 K. Yatsui, T. Sonegawa, K. Ohtomo and W.H. Jiang, Materials Chemistry and Physics 54 (1998) 219.
8 A.D. Pogrebnjak, V.T. Shablya, N.V. Sviridenko, A.N. Valyaev, S.V. Plotnikov and M.K. Kylyshkanov, Surf. & Coat. Technol. 111 (1999) 46.
9 V.I. Boiko, A.N. Valyaev and A.D. Pogrebnyak, Physics- Uspekhi 42 (1999) 1139.
10 D.J. Rej, H.A. Davis, J.C. Olson, G.E. Remnev, A.N. Zakoutaev, V.A. Ryzhkov, V.K. Struts, I.F. Isakov, V.A. Shulov, N.A. Nochevnaya, R.W. Stinnett, E.L. Neau, K. Yatsui and W. Jiang, J. Vac. Sci. Technol. A 15(3) 1089.
11 G.E. Remnev, I.F. Isakov, M.S. Opekounov, V.M. Matvienko, V.A. Ryzhkov, V.K. Struts, I.I. Grushina, A.N. Zakoutayev, A.V. Potyomkin, V.A. Tarbokov, A.N. Pushkaryov, V.L. Kutuzov and M.Yu. Ovsyan-nikov, Surf. & Coat. Technol. 114 (1999) 206.
12 http://mmlab.dlut.edu.cn/ (The website of Key Laboratory of Material Modification by laser, ion and electron beams, Dalian University of Technology)
13 A.D. Pogrebnjak, G.E. Remnev, I.B. Kurakin and A.E. Ligachev, NIM B 36 (1989) 286.
14 Yu.P. Sharkeev, E.V. Kozolov and A.N. Didenko, Surf. & Coat. Technol. 96 (1997) 5.
15 A.N. Valyaev, V.S. Ladysev, D.R. Mendygaliev, A.D. Pogrebnjak, A.A. Valyaev and N.A. Pogrebnjak, NIM B 171 (2000)481.
16 X.Y. Le, W.J. Zhao, S. Yan, B.X. Han and X. Xiang, High Power Laser and Particle Beams 13(4) (2001) 456 (in Chinese).
17 Y.K. Zhang, X.M. Dai and L. Cai, Applied Laser 19(3) (1999) 129 (in Chinese).
18 H.A. Davis, G.E. Remnev, R.W. Stinnet and K. Yatsui, MRS Bulletin 21(8) (1996) 58.
19 D.J. Rej, H. A. Davis, M. Nastasi, J.C. Olson, E.J. Peterson et al., NIM B127/128 (1997) 987.
20 P. Haasen, Physical Metallurgy (Cambridge University Press, 1978).

[1]	Fu-Yue Wang, Xiang-Jie Wang, Wei Sun, Fang Yu, Jian-Zhong Cui. Low Frequency Electromagnetic Casting of 2195 Aluminum-Lithium Alloy and Its Effects on Microstructure and Mechanical Properties [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(3): 338-350.
[2]	Gaoqiang Chen, Shuai Zhang, Yucan Zhu, Chengle Yang, Qingyu Shi. Thermo-mechanical Analysis of Friction Stir Welding: A Review on Recent Advances [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(1): 3-12.
[3]	Xiao Wang, Fei Lv, Li-Da Shen, Hui-Xin Liang, De-Qiao Xie, Zong-Jun Tian. Influence of Island Scanning Strategy on Microstructures and Mechanical Properties of Direct Laser-Deposited Ti-6Al-4V Structures [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(9): 1173-1180.
[4]	Qiao J.C., Chen Y.H., Lyu G.J., Song K.K., Pelletier J.M., Yao Y.. Mechanical Relaxation of a Ti_36.2Zr_30.3Cu_8.3Fe₄Be_21.2 Bulk Metallic Glass: Experiments and Theoretical Analysis [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(6): 726-732.
[5]	Lei Zhang, Tao He, Yu Bai, Fang-Li Yu, Wei Fan, Yu-Shan Ma, Zhan-Dong Chang, Hai-Bo Liu, Ben-Qiang Li. Velocity and Temperature of In-Flight Particles and Its Significance in Determining the Microstructure and Mechanical Properties of TBCs [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(10): 1269-1280.
[6]	Krzysztof Siemek, Mirosław Kulik, Marat Eseev, Mirosław Wróbel, Andrey Kobets, Oleg Orlov, Alexey Sidorin. Surface and Subsurface Defects Studies of Dental Alloys Exposed to Sandblasting [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(10): 1181-1194.
[7]	Yue Yu, Ben Xu, Hao Chen, Zhi-Gang Yang, Chi Zhang. Solubility and Anisotropic Migration Behaviors of Helium in bcc Iron Under Strain [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(2): 199-207.
[8]	Yao-Zong Mao, Ying-Hua Wei, Hong-Tao Zhao, Chen-Xi Lv, Hai-Jiao Cao, Jing Li. Corrosion Behavior of Epoxy-Coated Rebar with Pinhole Defect in Seawater Concrete [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(11): 1171-1182.
[9]	Xin-Yi Zhao, Zhi-Liang Ning, Fu-Yang Cao, Shan-Guang Liu, Yong-Jiang Huang, Jing-Shun Liu, Jian-Fei Sun. Effect of Double Oxide Film Defects on Mechanical Properties of As-Cast C95800 Alloy [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(6): 541-549.
[10]	Jilin LI, Rongshi CHEN, Yuequn MA,Wei KE. Hot Tearing of Sand Cast Mg-5 wt.% Y-4 wt.% RE (WE54) Alloy [J]. Acta Metallurgica Sinica (English Letters), 2013, 26(6): 728-734.
[11]	Jun CAI, Daogang LU. Bonding Character and Formation Energy of Point Defects of He and Vacancy on (001) Surface of bcc Iron by First Principle Calculations [J]. Acta Metallurgica Sinica (English Letters), 2013, 26(1): 25-32.
[12]	Feng Yang,Wenhuai Tian,Chuanchao Feng,Baosheng Wang. Crystal defects formed in electroformed nickel liners of shaped charges [J]. Acta Metallurgica Sinica (English Letters), 2009, 22(5): 383-391.
[13]	Y.F.Hu. OBSERVATION ON DEFECTS IN POLYCRYSTALLINE SILICON THIN FILMS [J]. Acta Metallurgica Sinica (English Letters), 2005, 18(3): 295-299 .
[14]	D.H.Kim. EFFECT OF CARBON AND BORON ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF A SINGLE CRYSTAL SUPERALLOY RR 2072 [J]. Acta Metallurgica Sinica (English Letters), 2005, 18(1): 33-38 .
[15]	. CRYSTAL DEFECTS IN PLASMA NITRIDED LAYER CATALYZED BY RARE EARTH [J]. Acta Metallurgica Sinica (English Letters), 2002, 15(2): 238-242 .