EFFECTS OF HIGH TEMPERATURE PRETREATMENTS ON HIGH TEMPERATURE FRACTURE BEHAVIOR OF SiC-C／SiC

Abstract

Abstract: The samples made from a SiC-C/SiC composite were pretreated in Ar under creep, fatigue, creep and fatigue interaction, as well as in dry oxygen and wet oxygen under fatigue at 1300℃ for 15 hours, The fracture behaviors of the pretreated samples were investigated at 1300℃. The loading-strain curves and the microstructures of the sample were compared with each other. The various of high temperature tensile behaviors was attributed to the different microstructures resulted from different high temperature pretreatments.

Key words: C/SiC, high temperature, tensile behavior

X.G.Luan, L.F.Cheng, S.R.Qiao, J.Zhang. EFFECTS OF HIGH TEMPERATURE PRETREATMENTS ON HIGH TEMPERATURE FRACTURE BEHAVIOR OF SiC-C／SiC[J]. Acta Metallurgica Sinica (English Letters), 2004, 17(4): 482-486 .

[1]	Jia-Min Shao, Cui-Wei Du, Xin Zhang, Li-Ying Cui. Effects of Lead on the Initial Corrosion Behavior of 316LN Stainless Steel in High-Temperature Alkaline Solution [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(1): 89-97.
[2]	Bo Li, Jun-Hong Jia, Yi-Min Gao, Hong-Jian Guo, Min-Min Han, Wen-Zhen Wang. Influence of Silver Contents on the Tribological Properties of Ni-Based Self-Lubricating Coatings by Atmospheric Plasma Spraying [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(8): 801-808.
[3]	Zhi-Yong Tan, Chang-Wan Min, Hong-Wei Wu, Yu-Hai Qian, Mei-Shuan Li. Comparison of Acoustic Emission Characteristics for C/SiC Composite Component Under Combination of Heating and Mechanical Loading [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(10): 992-998.
[4]	Xiao-Ling Zhou, Yin-Zhong Shen, Zhi-Qiang Xu. Precipitate Phases in an 11% Cr Ferritic/Martensitic Steel with Tempering and Creep Conditions [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(1): 48-57.
[5]	Lin Geng, Lujun Huang. High Temperature Properties of Discontinuously Reinforced Titanium Matrix Composites: A Review [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(5): 787-797.
[6]	Sun Chao, Yang Shanwu, Liu Guoliang. Evolution of Microstructures of a Low Carbon Bainitic Steel Held at High Service Temperature [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(3): 436-443.
[7]	Nian LIU, Guodong ZHANG. Optimal design of self-propagating high temperature one-dimensional nano-SnO₂ synthesis [J]. Acta Metallurgica Sinica (English Letters), 2011, 24(4): 321-325.
[8]	Chunwei MA, Kun SHI, Zhishui YU, Peiquan XU. Correlation between brazed joint elevated strength, microstructure and brazing processing parameter of Inconel superalloy [J]. Acta Metallurgica Sinica (English Letters), 2011, 24(3): 205-212.
[9]	Yujie LIU, Qing GAO and Guozheng KANG. A damage-coupled multi-axial time-dependent low cycle fatigue failure model for SS304 stainless steel at high temperature [J]. Acta Metallurgica Sinica (English Letters), 2011, 24(2): 169-174.
[10]	Shilu ZHAO, Jun ZHANG, Changsheng LIU. Oxidation behavior of TiAlZrCr/(Ti,Al, Zr, Cr)N gradient films deposited by multi-arc ion plating [J]. Acta Metallurgica Sinica (English Letters), 2010, 23(6): 473-480.
[11]	Qing WANG, Dongli SUN, Xiuli HAN, Weigong WANG. Hot deformation behavior of a near alpha titanium alloy with/without thermal hydrogen processing [J]. Acta Metallurgica Sinica (English Letters), 2010, 23(2): 106-112.
[12]	Jiqiang MA, Jun YANG, Qinling BI,Weimin LIU. Preparation of an ultrafine-grained Fe-40Al intermetallic compound [J]. Acta Metallurgica Sinica (English Letters), 2010, 23(1): 50-56.
[13]	Y.H. Ding, X. Liu, S.S. Zhao, Y. Long, R.C. Ye, Y.Q. Chang, F.R. Wan. High-Temperature AC Magnetic Properties of Nanocrystalline Finemet Alloys with Co Addition [J]. Acta Metallurgica Sinica (English Letters), 2007, 20(5): 327-333 .
[14]	F.J. Liu, M.C. Zhang, J.X. Dong, Y.W. Zhang. High Temperature Oxidation of FGH96 P/M Superalloy [J]. Acta Metallurgica Sinica (English Letters), 2007, 20(2): 102-110 .
[15]	C.W.Ma. ISOCHRONOUS STRESS-STRAIN CURVES OF LOW ALLOY STEEL CROSS-WELD-SPECIMEN AT HIGH TEMPERATURE [J]. Acta Metallurgica Sinica (English Letters), 2004, 17(4): 612-617 .

EFFECTS OF HIGH TEMPERATURE PRETREATMENTS ON HIGH TEMPERATURE FRACTURE BEHAVIOR OF SiC-C／SiC

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments