STRAIN-INDUCED ISOTHERMAL PRECIPITATION OF Nb,V AND Ti CARBONITRIDES IN MICROALLOYED STEELS DURING CONTROLLED ROLLING

Acta Metallurgica Sinica (English Letters) ›› 1989, Vol. 2 ›› Issue (3): 174-180.

• Research paper • Previous Articles Next Articles

STRAIN-INDUCED ISOTHERMAL PRECIPITATION OF Nb,V AND Ti CARBONITRIDES IN MICROALLOYED STEELS DURING CONTROLLED ROLLING

Received:1989-06-25 Revised:1989-06-25 Online:1989-06-25 Published:2009-10-10

Abstract

XU Wenchong MA Xiang SUN Fuyu ZONG Guisheng Central Iron and Steel Research Institute,Ministry of Metallurgical Industry,Beijing,China XU Wenchong,Senior Engineer,Department No.13,Central Iron and Steel Research Institute,Ministry of Metallurgical Industry,Beijing,China. STRAIN-INDUCED ISOTHERMAL PRECIPITATION OF Nb,V AND Ti CARBONITRIDES IN MICROALLOYED STEELS DURING CONTROLLED ROLLING[J]. Acta Metallurgica Sinica (English Letters), 1989, 2(3): 174-180.

[1]	Xiao-Lin Pan, Minoru Umemoto. Precipitation Characteristics and Mechanism of Vanadium Carbides in a V-Microalloyed Medium-Carbon Steel [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(11): 1197-1206.
[2]	Ba Li, Qing-You Liu, Shu-Jun Jia, Yi Ren, Bing Wang. Effect of Pre-deformation on Grain Ultrafining by Intercritical Deformation in Low-Carbon Microalloyed Steels [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(10): 1038-1048.
[3]	X.M.Zhao, D.Wu, L.Z.Zhang, Z.Y.Liu. MODELING OF ISOTHERMAL PRECIPrrATION KINETICS IN HSLA STEELS AND ITS APPLICATION [J]. Acta Metallurgica Sinica (English Letters), 2004, 17(6): 902-906 .
[4]	R.Cremer, D.Kurapov, C.Martinez, O.Kyrylov, D.Neuschütz. PECVD OF HARD AND ELASTIC BCN COATINGS [J]. Acta Metallurgica Sinica (English Letters), 2002, 15(1): 15-20 .
[5]	Z. Li, G. D. Wang,X. H. Liu and C. Y. Ma The State Key Lab. of Rolling Technology and Automation, Northeastern Univarsity, Shenyang 110006 China. EFFECT OF THE CONTROLLED ROLLING CONTROLLED COOLING ON STRENGTH AND DUCTILITY OF THE BAINITE MICRO ALLOYED ENGINEERING STEEL [J]. Acta Metallurgica Sinica (English Letters), 2000, 13(2): 421-427.
[6]	J. T.Niu,L.J.Sun and P.Karjalainen 1) Harbin Institute of Technology, Harbin 150001, China 2) University of Oulu, FIN-90571, Oulu, Finland. A NEURAL NETWORK-BASED MODEL FOR PREDICTION OF HOT-ROLLED AUSTENITE GRAIN SIZE AND FLOW STRESS IN MICROALLOY STEEL [J]. Acta Metallurgica Sinica (English Letters), 2000, 13(2): 521-530.
[7]	TANG Guoyi ZHENG Yangzeng Yanshan University,Qinhuangdao,China ZHU Jing CAI Qigong Central Iron and Steel Research Institute,Ministry of Metallurgical Industry,Beijing,China. BEHAVIOR OF FINE V-Ti COMPLEX CARBONITRIDE IN STEEL 09MnVTiN DURING REHEATING [J]. Acta Metallurgica Sinica (English Letters), 1992, 5(2): 112-115.
[8]	XU Wenchong SUN Fuyu Central Iron and Steel Research Institute,Ministry of Metallurgical Industry,Beijing,China XU Wenchong Senior Engineer,Dept.No.13,Central Iron and Steel Research Institute,Ministry of Metallurgical Industry,Beijing 100081,China. LATTICE PARAMETERS OF COMPLEX CARBONITRIDE CONTAINING Ti,Nb AND V [J]. Acta Metallurgica Sinica (English Letters), 1990, 3(9): 211-213.
[9]	YONG Qilong LI Yongfu Yunnan Institute of Technology,Kunming,ChinaSUN Zhenbao WU Baorong Central Iron and Steel Research Institute,Ministry of Metallurgical Industry,Beiiing,China YONG Qilong,Department of Mechanical Engineering,Yunnan Institute of Technology,Kunming,China. THEORETICAL CALCULATION OF SPECIFIC INTERFACIALENERGY OF SEMICOHERENT INTERFACE BETWEEN MICROALLOY CARBONITRIDES AND AUSTENITE [J]. Acta Metallurgica Sinica (English Letters), 1989, 2(2): 153-156.

STRAIN-INDUCED ISOTHERMAL PRECIPITATION OF Nb,V AND Ti CARBONITRIDES IN MICROALLOYED STEELS DURING CONTROLLED ROLLING

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 9

Recommended Articles

Metrics

Comments