TEXTURAL REPRESENTATION FOR DEEP DRAWING STEEL SHEETS

Abstract

Abstract: Based on the crystallographic nature,two major characteristic textures of the deep drawing automobile body steel sheet are represented with inverse pole figures,The correlation between the textures of the deep drawing steel sheets and its deep drawing properties may be simply and directly analysed by the quantitative texture technique.The results obtained by this tech- nique is in agreement with that of ODF quantitative analysis.

Key words: texture, ODF, volume fraction, inverse pole figure

ZHAO Xiang ZUO Liang XU Yiazhen WANG Fu LIANG Zhide Northeast University of Technology,Shenyang,China ZHAO Xiang Lecturer,Faculty of Metallography.Northeast University of Technology Shenyang 110006,China. TEXTURAL REPRESENTATION FOR DEEP DRAWING STEEL SHEETS[J]. Acta Metallurgica Sinica (English Letters), 1990, 3(9): 214-216.

[1]	L. B. Tong, J. H. Chu, D. N. Zou, Q. Sun, S. Kamado, H. G. Brokmeier, M. Y. Zheng. Simultaneously Enhanced Mechanical Properties and Damping Capacities of ZK60 Mg Alloys Processed by Multi-Directional Forging [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(2): 265-277.
[2]	Xiaohui Shi, Zuhan Cao, Zhiyuan Fan, Junwei Qiao. Texture Evolution Behavior and Its Triggered Mechanical Anisotropy of CP Ti During Severe Cold Rolling and Subsequent Annealing [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1271-1282.
[3]	Fenghua Wang, Peng Su, Linxin Qin, Shuai Dong, Yunliang Li, Jie Dong. Microstructure and Mechanical Properties of Mg-3Al-Zn Magnesium Alloy Sheet by Hot Shear Spinning [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1226-1234.
[4]	Hou-Long Liu, Ling-Ling Liu, Ming-Yu Ma, Li-Qing Chen. Influence of Finish Rolling Temperature on Microstructure and Mechanical Properties of a 19Cr1.5Mo0.5 W Ferritic Stainless Steel [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(7): 991-1000.
[5]	Jian Xun, Gaoyong Lin, Huiqun Liu, Siyu Zhao, Jing Chen, Xun Dai, Ruiqian Zhang. Texture Evolution and Dynamic Recrystallization of Zr-1Sn-0.3Nb-0.3Fe-0.1Cr Alloy During Hot Rolling [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(2): 215-224.
[6]	Ying Ma, Fu-Yin Han, Cheng Liu, Ming-Zhe Li. Microstructure, Texture Evolution, and Mechanical Properties of ECAP-Processed ZAT522 Magnesium Alloy [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(2): 233-242.
[7]	A. Shah S., D. Wu, Chen R. S., Song G. S.. Temperature Effects on the Microstructures of Mg-Gd-Y Alloy Processed by Multi-direction Impact Forging [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(2): 243-251.
[8]	Jiang-Li Ning, Bo Xu, Yun-Li Feng, Xu-Dong Li, Xin-Kang Li, Wei-Ping Tong. Tension-Compression Yield Asymmetry Influenced by the Variable Deformation Modes in Gradient Structure Mg Alloys [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(2): 252-266.
[9]	Song-Wei Wang, Hong-Wu Song, Yan Chen, Shi-Hong Zhang, Hai-Hong Li. Evolution of Annealing Twins and Recrystallization Texture in Thin-Walled Copper Tube During Heat Treatment [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1618-1626.
[10]	Jun-Lei Zhang, Han Liu, Yu-Lu Xie, Guang-Sheng Huang, Xiang Chen, Bin Jiang, Ai-Tao Tang, Fu-Sheng Pan. Microstructure Distribution and Tensile Anisotropy of Dissimilar Friction Stir Welded AM60 and AZ31 Magnesium Alloys [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(11): 1487-1504.
[11]	Qiyu Liao, Wenxin Hu, Qichi Le, Xingrui Chen, Ke Hu, Chunlong Cheng, Chenglu Hu. Microstructure, Mechanical Properties and Texture Evolution of Mg-Al-Zn-La-Gd-Y Magnesium Alloy by Hot Extrusion and Multi-Pass Rolling [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(10): 1359-1368.
[12]	Wen Wang, Peng Han, Jie Yuan, Pai Peng, Qiang Liu, Fei Qiang, Ke Qiao, Kuai-She Wang. Enhanced Mechanical Properties of Pure Zirconium via Friction Stir Processing [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(1): 147-153.
[13]	Xiao-Ye Liu, Li-Wei Lu, Kun Sheng, Tao Zhou. Microstructure and Texture Evolution During the Direct Extrusion and Bending-Shear Deformation of AZ31 Magnesium Alloy [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(6): 710-718.
[14]	Yang Wu, Yun-Chang Xin, Xiang-Sheng Xia, Bo Feng, Yan-Bin Wang, Zu-De Zhao. Influence of Annealing Treatments on Microstructure and Mechanical Properties of an Extruded Mg AZ31/Al 7050 Laminate [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(2): 227-234.
[15]	Rong-Guang Li, Farhan Asghar, Jing-Huai Zhang, Guang-Yan Fu, Qun Liu, Bei-Tao Guo, Yong-Mei Yu, Shu-Guo Guo, Yong Su, Xue-Jiao Chen, Lin Zong. Microstructure Evolution of Extruded Mg-6Gd Alloy Under 175 °C and 150 MPa [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(2): 245-252.

TEXTURAL REPRESENTATION FOR DEEP DRAWING STEEL SHEETS

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments