[1] |
Chao Chen, Chenglei Fan, Zeng Liu, Xiaoyu Cai, Sanbao Lin, Yimin Zhuo.
Microstructure Evolutions and Properties of Al-Cu Alloy Joint in the Pulsed Power Ultrasonic-Assisted GMAW
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(10): 1397-1406.
|
[2] |
Ming He, Xian-Liang Li, Xing-An Liu, Xiao-Wei Zhu, Tie Liu, Qiang Wang.
Coil Ambient Temperature and Its Influence on the Formation of Blocking Layer in the Electromagnetic Induction-Controlled Automated Steel-Teeming System
[J]. Acta Metallurgica Sinica (English Letters), 2019, 32(3): 391-400.
|
[3] |
Kang-Xin Chen, Hou-Fa Shen.
Numerical Simulation of Macrosegregation Caused by Thermal-Solutal Convection and Solidification Shrinkage Using ALE Model
[J]. Acta Metallurgica Sinica (English Letters), 2019, 32(11): 1396-1406.
|
[4] |
Zhen-Hu Duan, Hou-Fa Shen, Bai-Cheng Liu.
A Numerical Study of the Effect of Multiple Pouring on Macrosegregation in a 438-Ton Steel Ingot
[J]. Acta Metallurgica Sinica (English Letters), 2015, 28(9): 1123-1133.
|
[5] |
Chetan P. Nikhare.
Prediction of Springback in Long Channels
[J]. Acta Metallurgica Sinica (English Letters), 2015, 28(12): 1525-1531.
|
[6] |
Zu-Qi Hu, Xin-Jian Zhang, Shu-Sen Wu.
Microstructure, Mechanical Properties and Die-Filling Behavior of High-Performance Die-Cast Al-Mg-Si-Mn Alloy
[J]. Acta Metallurgica Sinica (English Letters), 2015, 28(11): 1344-1353.
|
[7] |
Zhenmin WANG, Fang YAN,Pengcheng ZHAO.
Numerical Simulation of the Dynamic Behaviors of a Gas Tungsten Welding Arc for Joining Magnesium Alloy AZ61A
[J]. Acta Metallurgica Sinica (English Letters), 2013, 26(5): 588-596.
|
[8] |
Dean DENG, Yangang TONG, Ninshu MA, Hidekazu MURAKAWA.
Prediction of the Residual Welding Stress in 2.25Cr-1Mo Steel by Taking into Account the Effect of the Solid-State Phase Transformations
[J]. Acta Metallurgica Sinica (English Letters), 2013, 26(3): 333-339.
|
[9] |
Guoxiang XU, Chuansong WU, Xuezhou MA, Xuyou WANG.
Numerical Analysis of Welding Residual Stress and Distortion in Laser+GMAW Hybrid Welding of Aluminum Alloy T-Joint
[J]. Acta Metallurgica Sinica (English Letters), 2013, 26(3): 352-360.
|
[10] |
Junqiu ZHANG, Zhiwu HAN,Wei YIN, Huiyuan WANG,Chao GE, Jialian JIANG.
Numerical Experiment of the Solid Particle Erosion of Bionic Configuration Blade of Centrifugal Fan
[J]. Acta Metallurgica Sinica (English Letters), 2013, 26(1): 16-24.
|
[11] |
Wen ZHENG,Min WANG,Liang KONG,Xuanting CHENG,Ming LEI .
Parameter optimization of dissimilar resistance spot welding on ultra-high strength hot-stamped steel and mild steel by numerical simulation
[J]. Acta Metallurgica Sinica (English Letters), 2012, 25(6): 487-498.
|
[12] |
Prosenjit Das, Sudip K. Samanta, Himadri Chattopadhyay,Pradip Dutta.
Effect of pouring temperature on cooling slope casting of semi-solid Al-Si-Mg alloy
[J]. Acta Metallurgica Sinica (English Letters), 2012, 25(5): 329-339.
|
[13] |
Shude JI,AiliZOU, Yumei YUE, Guohong LUAN,Yanye JIN, Fu LI.
Numerical simulation of effect of rotational tool with screw on material flow behavior of friction stir welding of Ti6Al4V alloy
[J]. Acta Metallurgica Sinica (English Letters), 2012, 25(5): 365-373.
|
[14] |
Haichao CUI, Fenggui LU, Xinhua TANG,Shun YAO.
Particles migration behavior during laser keyhole welding of ZL101/TiB2 composites
[J]. Acta Metallurgica Sinica (English Letters), 2012, 25(3): 190-200.
|
[15] |
Dongrong LIU, Xiuhong KANG, Baoguang SANG, Dianzhong LI.
Numerical study of macrosegregation formation of ingot cast in normal sand mold and water-cooled sand mold
[J]. Acta Metallurgica Sinica (English Letters), 2011, 24(1): 54-64.
|