TRACKING OBSERVATION ON SUBSURFACE CRACK IN BEARING STEEL GCr15 UNDER ROLLING CONTACT

Abstract

Abstract: Based on the sequent tracking observation on spalling of steel GCr15 under rolling contact fa- tigue,an expression for estimating the propagation of subsurface cracks was derived.The rol- ling contact fatigue life was found to be markedly related to the subsurface crack propagation angle.A new explanation of reason why the rolling contact fatigue life can be prolonged by residual compressive stress and retained austenite was advanced.

Key words: contact fatigue, fatigue life, crack propagating angle, residual stress, retained austenite

CHEN Longqing Zhengzhou Institute of Technology,Zhengzhou,China CHEN Qing Luoyang Institute of Technology,Luoyang,China. TRACKING OBSERVATION ON SUBSURFACE CRACK IN BEARING STEEL GCr15 UNDER ROLLING CONTACT[J]. Acta Metallurgica Sinica (English Letters), 1992, 5(2): 128-132.

[1]	Meng Yan, Cong Wang, Tianjiao Luo, Yingju Li, Xiaohui Feng, Qiuyan Huang, Yuansheng Yang. Effect of Pulsed Magnetic Field on the Residual Stress of Rolled Magnium Alloy AZ31 Sheet [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(1): 45-53.
[2]	Siqi Xiang, Xinfang Zhang. Residual Stress Removal Under Pulsed Electric Current [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(2): 281-289.
[3]	Yong-Han Li, Zhong-Hua Jiang, Zhen-Dan Yang, Jue-Shun Zhu. Effect of Indirect Transformation of Retained Austenite During Tempering on the Charpy Impact Toughness of a Low-Alloy Cr-Mo-V Steel [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(10): 1346-1358.
[4]	Wen-Chao Dong, Dian-Bao Gao, Shan-Ping Lu. Numerical Investigation on Residual Stresses of the Safe-End/Nozzle Dissimilar Metal Welded Joint in CAP1400 Nuclear Power Plants [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(5): 618-628.
[5]	Huseyin Zengin, Yunus Turen, Muhammet Emre Turan, Fatih Ayd?n. Evolution of Microstructure, Residual Stress, and Tensile Properties of Mg-Zn-Y-La-Zr Magnesium Alloy Processed by Extrusion [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(11): 1309-1319.
[6]	Lin Jiang, Liang Zhang, Zhi-Quan Liu. Optimal Design of Co/In/Cu Sputtering Target Assembly Using Finite Element Method and Taguchi Method [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(11): 1407-1414.
[7]	Yang Zhao, Wen-Ting Zhu, Shu Yan, Li-Qing Chen. Effect of Microstructure on Tensile Behavior and Mechanical Stability of Retained Austenite in a Cold-Rolled Al-Containing TRIP Steel [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(10): 1237-1243.
[8]	Feng Wang, Dong-Sheng Qian, Xiao-Hui Lu. Effect of Prior Cold Deformation on the Stability of Retained Austenite in GCr15 Bearing Steel [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(1): 107-115.
[9]	Erfan Abbasi, Quanshun Luo, Dave Owens. Microstructural Characteristics and Mechanical Properties of Low-Alloy, Medium-Carbon Steels After Multiple Tempering [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(1): 74-88.
[10]	Shu-Ming Wang, Jiang-Shan Li, Yan-Xin Wang, Xiao-Fang Zhang, Qing Ye. Thermal Shock Behavior Analysis of Tungsten-Armored Plasma-Facing Components for Future Fusion Reactor [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(5): 515-522.
[11]	Zhong-Yuan Feng, Xin-Jie Di, Shi-Pin Wu, Dong-Po Wang, Xiao-Qian Liu. Comparison of Microstructure and Residual Stress Between TIG and MAG Welding Using Low Transformation Temperature Welding Filler [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(3): 263-272.
[12]	Shao-Heng Sun, Ai-Min Zhao, Ran Ding, Xiao-Gang Li. Effect of Heat Treatment on Microstructure and Mechanical Properties of Quenching and Partitioning Steel [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(2): 216-224.
[13]	Z.G. Liu, T.I. Wong, W. Huang, N. Sridhar, S.J. Wang. Effect of Surface Polishing Treatment on the Fatigue Performance of Shot-Peened Ti-6Al-4V Alloy [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(7): 630-640.
[14]	Ye-Jun Zhu, Wen-Feng Ding, Ze-Yu Zhao, Yu-Can Fu, Hong-Hua Su. Compressive Strength and Interface Microstructure of PCBN Grains Brazed with High-Frequency Induction Heating Method [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(7): 641-649.
[15]	Wenbo Zhao, T.Warren Liao, Lampros Kompotiatis. Stress and Springback Analyses of API X70 Pipeline Steel Under 3-Roller Bending via Finite Element Method [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(5): 470-482.

TRACKING OBSERVATION ON SUBSURFACE CRACK IN BEARING STEEL GCr15 UNDER ROLLING CONTACT

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments