DRY SLIDING WEAR OF Cu-BASED SHAPE MEMORY ALLOY

Abstract

Abstract: The wear of Cu-based CuZnAl shape memory alloys under dry sliding against steel was found to be plasticity-dominated,with adhesion and delamination being the two main mecha- nisms.Adhesion was found to be accompanied by metal transfer.TEM observation on tensile test of thin foil showed that the stress-induced martensitic transformation occurred from β-phase in the vicinity of pre-existing microcracks.The blunt effect of crack tips may be proposed to explain the wear of CuZnAl shape memory alloy due to preferential orientation reaction of variants in martensite and stress-induced martensitic transformation in β-phase.

Key words: CuZnAl allov shape memory alloy, wear, martensitic transformation

WANG Hongwei Dalian University of Technology,Dalian,ChinaWU Wangzi Shenyang Institute of Technology,Shenyang,ChinaWANG Fengting YANG Dazhi Dalian University of Technology,Dalian,China. DRY SLIDING WEAR OF Cu-BASED SHAPE MEMORY ALLOY[J]. Acta Metallurgica Sinica (English Letters), 1992, 5(3): 193-198.

[1]	Jinling Lu, Zhenjiang Wang, Wei Wang, Kexuan Zhou, Feng He, Zhijun Wang. Superior Slurry Erosion Behavior of a Casting NiCoCrFeNb_0.45 Eutectic High Entropy Alloy [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1111-1116.
[2]	Yunhai Su, Xuewei Liang, Yunqi Liu, Zhiyong Dai. Effect of Ti Addition on the Microstructure and Property of FeAlCuCrNiMo_0.6 High-Entropy Alloy [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(7): 957-967.
[3]	Jin Hyuk Choi, Gobinda Gyawali, Dhani Ram Dhakal, Bhupendra Joshi, Soo Wohn Lee. Electrodeposited Ni-W-TiC Composite Coatings: Effect of TiC Reinforcement on Microstructural and Tribological Properties [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(4): 573-582.
[4]	Jie Liu, Shui-Sheng Zhu, Xin Deng, Jian-Ye Liu, Zhong-Ping Wang, Zhi Qu. Cutting Performance and Wear Behavior of AlTiN- and TiAlSiN-Coated Carbide Tools During Dry Milling of Ti-6Al-4V [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(3): 459-470.
[5]	Pengfei Gao, Weijian Chen, Feng Li, Beijia Ning, Zhengzhi Zhao. Quasi-Situ Characterization of Deformation in Low-Carbon Steel with Equiaxed and Lamellar Microstructure Treated by the Quenching and Partitioning Process [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1657-1665.
[6]	I. Ansarian, M. H. Shaeri, M. Ebrahimi, P. Minárik. Tribological Characterization of Commercial Pure Titanium Processed by Multi-Directional Forging [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(7): 857-868.
[7]	Jiao Xu, Dan-Qing Yi, Qiang Cui, Bin Wang. Enhanced Wear Resistance of Ni/h-BN Composites with Graphene Addition Produced by Spark Plasma Sintering [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(7): 876-886.
[8]	Li Yang, Zhang Shang-Zhou, Qiu Jian-Xun, He Yong-Yong, Xiu Jun-Jie, Ye Qian-Wen, Liu Zhong-Li. Effect of Electric Potentials on Microstructure, Corrosion and Wear Characteristic of the Nitrided Layer Prepared on 2Cr13 Stainless Steel by Plasma Nitriding [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(6): 733-745.
[9]	Bing-Yu Qian, Wei Miao, Min Qiu, Fan Gao, Dong-Hui Hu, Jian-Feng Sun, Rui-Zhi Wu, Boris Krit, Sergey Betsofen. Influence of Voltage on the Corrosion and Wear Resistance of Micro-Arc Oxidation Coating on Mg-8Li-2Ca Alloy [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(2): 194-204.
[10]	Sabbah Ataya, Naser A. Alsaleh, Mohamed M. El-Sayed Seleman. Strength and Wear Behavior of Mg Alloy AE42 Reinforced with Carbon Short Fibers [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(1): 31-40.
[11]	Ge Bian, Ming Cheng, Yang Liu, Shi-Hong Zhang. Wear Behaviors of GH4169 Super Alloy and 3Cr2W8V Tool Steel Under Dry Rolling Condition [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(9): 983-996.
[12]	Xiao Wang, Jun-Wei Wu, Lu-Hai Zhou, Xi-Cheng Wei, Wu-Rong Wang. Tribological analysis of the surface layer coated by sintered serpentine-reinforced composites [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(6): 615-622.
[13]	Qing-Jie Wu, Hong Yan, Peng-Xiang Zhang, Xue-Qin Zhu, Qiao Nie. Enhancing Wear Resistance of A356 Alloy by Adding CNFs Based on Ultrasonic Vibration Casting [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(5): 523-532.
[14]	Li-Na Wang, Ping Yang, Ting Jin, Wei-Min Mao. Different Mechanisms of ε-M and α′-M Variant Selection and the Influencing Factors of ε-M Reversion During Dynamic Tension in TRIP Steel [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(5): 449-455.
[15]	Zhong-Yuan Feng, Xin-Jie Di, Shi-Pin Wu, Dong-Po Wang, Xiao-Qian Liu. Comparison of Microstructure and Residual Stress Between TIG and MAG Welding Using Low Transformation Temperature Welding Filler [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(3): 263-272.

DRY SLIDING WEAR OF Cu-BASED SHAPE MEMORY ALLOY

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments