DIMPLE FORMATION ON FRACTURE SURFACE OF STEEL 55SiMnMo

Abstract

Abstract: The fracture surface of the normalized steel 55SiMnMo was observed,under tensile device at- tached on the SEM,to be of ductile dimple feature on the bainite which is composed of lath ferrite and austenite platelet.The dimple is essentially nucleated in the ferrite.Because the austenitic plastic deformation is remarkable during fracturing,the tear ridge of dimple is very sharp.

Key words: dimple, plastic deformation, ductile fracture, steel 55SiMnMo

LIANG Sizu LIANG Yaoneng LIU Zhengyi South China University of Technology,Guangzhou,China Lecturer,Department of Mechanical Engineering No.2,South China University of Technology,Guangzhou 510641,China. DIMPLE FORMATION ON FRACTURE SURFACE OF STEEL 55SiMnMo[J]. Acta Metallurgica Sinica (English Letters), 1993, 6(2): 140-143.

[1]	Kai Yan, Huan Liu, Xiaowei Xue, Jing Bai, Honghui Chen, Shuangquan Fang, Jingjing Liu. Enhancing Mechanical Properties of Mg-6Zn Alloy by Deformation-Induced Nanoprecipitation [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(2): 217-226.
[2]	Meichen Liang, Hao Zhang, Lifeng Zhang, Peng Xue, Dingrui Ni, Weizhen Wang, Zongyi Ma, Hengqiang Ye, Zhiqing Yang. Evolution of Quasicrystals and Long-Period Stacking Ordered Structures During Severe Plastic Deformation and Mixing of Dissimilar Mg Alloys Upon Friction Stir Welding [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(1): 12-24.
[3]	Li-Na Wang, Ping Yang, Ting Jin, Wei-Min Mao. Different Mechanisms of ε-M and α′-M Variant Selection and the Influencing Factors of ε-M Reversion During Dynamic Tension in TRIP Steel [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(5): 449-455.
[4]	Oleg Matvienko, Olga Daneyko, Tatyana Kovalevskaya. Mathematical modeling of nanodispersed hardening of FCC materials [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(12): 1297-1304.
[5]	Ren-Guo Guan, Di Tie. A Review on Grain Refinement of Aluminum Alloys: Progresses, Challenges and Prospects [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(5): 409-432.
[6]	Guo-Sheng Zhang, De-Feng Guo, Ming Li, Jing-Tao Li, Qian Zhang, Xiao-Hong Li, Xiang-Yi Zhang. Tailoring Microstructure and Tribological Properties of Cold Deformed TiZrAlV Alloy by Thermal Treatment [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(5): 493-498.
[7]	Amir Mostafapor,Vahid Mohammadinia. Mechanical Properties and Microstructure Evolution of AA1100 Aluminum Sheet Processed by Accumulative Press Bonding Process [J]. Acta Metallurgica Sinica (English Letters), 2016, 29(8): 735-741.
[8]	Qun Zu, Ya-Fang Guo, Shuang Xu, Xiao-Zhi Tang, Yue-Sheng Wang. Molecular Dynamics Simulations of the Orientation Effect on the Initial Plastic Deformation of Magnesium Single Crystals [J]. Acta Metallurgica Sinica (English Letters), 2016, 29(3): 301-312.
[9]	S. E. Hernández-Martínez,J. J. Cruz-Rivera,R. Martínez-Sánchez,C. G. Garay-Reyes,J. A. Mu?oz-Bola?os,J. M. Cabrera,J. L. Hernández-Rivera. Consolidation of AA 7075-2 wt% ZrO₂ Composite Powders by Severe Plastic Deformation via ECAP [J]. Acta Metallurgica Sinica (English Letters), 2016, 29(10): 895-895.
[10]	Xiao Jin, Bao-Qin Fu, Cheng-Lu Zhang, Wei Liu. Study of Dislocation Boundary Structure in Al-Li Alloy During Bending [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(9): 1149-1155.
[11]	Feng Li, Wei Shi, Nan Bian, Hong-Bin Wu. Effect of Accumulative Strain on Grain Refinement and Strengthening of ZM6 Magnesium Alloy During Continuous Variable Cross-Section Direct Extrusion [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(5): 649-655.
[12]	Ming-Wei Zhu, Nan Jia, Feng Shi, Bj, rn Clausen. Neutron Diffraction Study of Low-Cycle Fatigue Behavior in an Austenitic-Ferritic Stainless Steel [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(10): 1247-1256.
[13]	Faramarz Djavanroodi, Ali Asghar Zolfaghari, Mahmoud Ebrahimi, Kamran Nikbin. Route Effect on Equal Channel Angular Pressing of Copper Tube [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(1): 95-100.
[14]	Ying Sun, Xifeng Li, Xiangyu Yu, Delong Ge, Jun Chen, Jieshi Chen. Fracture Morphologies of Advanced High Strength Steel During Deformation [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(1): 101-106.
[15]	Xifeng LI, Jun CHEN, Liyan YE, Wei DING, Pengchao SONG. Influence of Strain Rate on Tensile Characteristics of SUS304 Metastable Austenitic Stainless Steel [J]. Acta Metallurgica Sinica (English Letters), 2013, 26(6): 657-662.

DIMPLE FORMATION ON FRACTURE SURFACE OF STEEL 55SiMnMo

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments