IMPROVEMENT OF DUCTILITY AND TOUGHNESS OF Ni-RICH NiAl AT ROOM TEMPERATURE

Abstract

Abstract: In rapidly solidified Ni-34.6 at-% Al alloy,when the cooling the rate during solidification reached the order of 10~6 K/s,the size of the microstructures,such as the grains and substructure of the martensite,decreased dramatically.The various kinds of interfaces with high density and homogeneous distribution resisted effectively the propagation of the cracks and resulted in localized plastic deformation ahead of the tips of microcracks.The ductility and toughness at room temperature of the Ni-rich NiAl may be improved considerably.

Key words: NiAl, rapid solidification, ductility, toughness

CHENG Tianyi Beijing Institute of Technology,Beijing,ChinaCANTORB University of Oxford,UKMcLEANM FLOWERHM Imperial College,UK CHENG Tianyi,associate professor,Faculty of Metallography,Beijing Institute of Technology,Beijing 100081,China. IMPROVEMENT OF DUCTILITY AND TOUGHNESS OF Ni-RICH NiAl AT ROOM TEMPERATURE[J]. Acta Metallurgica Sinica (English Letters), 1993, 6(5): 296-299.

[1]	Hua-Ping Tang, Qu-Dong Wang, Colin Luo, Chuan Lei, Tian-Wen Liu, Zhong-Yang Li, Kui Wang, Hai-Yan Jiang, Wen-Jiang Ding. Effects of Solution Treatment on the Microstructure, Tensile Properties, and Impact Toughness of an Al-5.0Mg-3.0Zn-1.0Cu Cast Alloy [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(1): 98-110.
[2]	Yongkui Li, Jianxin Lou, Hongtao Ju, Li Lin. Impact Toughness of Heat-Affected Zones of 11Cr Heat-Resistant Steels [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(6): 821-827.
[3]	Jian Han, Zhixiong Zhu, Gang Wei, Xingxu Jiang, Qian Wang, Yangchuan Cai, Zhengyi Jiang. Microstructure and Mechanical Properties of Nb- and Nb + Ti-Stabilised 18Cr-2Mo Ferritic Stainless Steels [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(5): 716-730.
[4]	Mohamad Ebrahimnia, Yujiang Xie, Changtai Chi. Effect of laser power and deposition environment on the microstructure and properties of direct laser metal-deposited 12CrNi2 steel [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(4): 528-538.
[5]	Xian-Kai Fan, Fu-Quan Li, Lei Liu, Hai-Chao Cui, Feng-Gui Lu, Xin-Hua Tang. Evolution of γ′ Particles in Ni-Based Superalloy Weld Joint and Its Effect on Impact Toughness During Long-Term Thermal Exposure [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(4): 561-572.
[6]	Wen-Chao Dong, Ming-Yue Wen, Hui-Yong Pang, Shan-Ping Lu. Effect of Post-weld Tempering on the Microstructure and Mechanical Properties in the Simulated HAZs of a High-Strength-High-Toughness Combination Marine Engineering Steel [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(3): 391-402.
[7]	Ke Xu, Tao Fang, Longfei Zhao, Haichao Cui, Fenggui Lu. Effect of Trace Element on Microstructure and Fracture Toughness of Weld Metal [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(3): 425-436.
[8]	Hamid Mousalou, Sasan Yazdani, Naghi Parvini Ahmadi, Behzad Avishan. Nanostructured Carbide-Free Bainite Formation in Low Carbon Steel [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1635-1644.
[9]	Yong-Han Li, Zhong-Hua Jiang, Zhen-Dan Yang, Jue-Shun Zhu. Effect of Indirect Transformation of Retained Austenite During Tempering on the Charpy Impact Toughness of a Low-Alloy Cr-Mo-V Steel [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(10): 1346-1358.
[10]	Manoj Kumar Pathak, Amit Joshi, K. K. S. Mer, R. Jayaganthan. Mechanical Properties and Microstructural Evolution of Bulk UFG Al 2014 Alloy Processed Through Cryorolling and Warm Rolling [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(7): 845-856.
[11]	Wang Xiao-Jiang, Sun Xin-Jun, Song Cheng, Chen Huan, Tong Shuai, Han Wei, Pan Feng. Grain Size-Dependent Mechanical Properties of a High-Manganese Austenitic Steel [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(6): 746-754.
[12]	Teng Tu, Xian-Hua Chen, Jiao Chen, Chao-Yue Zhao, Fu-Sheng Pan. A High-Ductility Mg-Zn-Ca Magnesium Alloy [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(1): 23-30.
[13]	Gang Liu, Shi-Lei Li, Hai-Long Zhang, Xi-Tao Wang, Yan-Li Wang. Characterization of Impact Deformation Behavior of a Thermally Aged Duplex Stainless Steel by EBSD [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(8): 798-806.
[14]	Li Xiang, Xiao-Hua Min, Xin Ji, Satoshi Emura, Cong-Qian Cheng, Koichi Tsuchiya. Effect of Pre-cold Rolling-Induced Twins and Subsequent Precipitated ω-Phase on Mechanical Properties in a β-Type Ti-Mo Alloy [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(6): 604-614.
[15]	Xiao-Jiang Wang, Xin-Jun Sun, Cheng Song, Shuai Tong, Luo-Jin Liu, Huan Chen, Wei Han, Feng Pan. Control of Secondary Phases by Solution Treatment in a N-Alloyed High-Mn Cryogenic Steel [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(10): 1059-1072.

IMPROVEMENT OF DUCTILITY AND TOUGHNESS OF Ni-RICH NiAl AT ROOM TEMPERATURE

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments