NUMERICAL ANALYSIS OF THREE-DIMENSIONAL FLUID FLOW AND HEAT TRANSFER IN TIG WELD POOL WITH FULL PENETRATION

Abstract

Abstract: A model is established to analyze three-dimensional fluid flow and heat transfer in TICweld pools with full penetration.It considers the deformation of the molten pool surfaceat the condition of full penetrated workpieees,takes the are pressure as the drivingforce of the pool surface deformation,and determines the surface configuration of weldpool based on the dynamic balance of arc pressure,pool gravity and surface tension atdeformed weld pool surface. The SIMPLER algorithm is used to calculate the fluid flowfield and temperature distribution in TIG weld pools of stainless steel workpieces.TIGwelding experiments are made to verify the validity of the model.It shows the calculatedresults by the model are in good agreement with experimental measurements. professor,Dept of Welding Engineering,Harbin Institute of Technology,Harbin 150006,China

Key words: KEY WORDS TIG weld pool, full penetration, fluid flow, heat transfer, numerical analysis

WU Chuansong,CAO Zhenning,WU Lin Harbin Institute of Technology,Harbin,China. NUMERICAL ANALYSIS OF THREE-DIMENSIONAL FLUID FLOW AND HEAT TRANSFER IN TIG WELD POOL WITH FULL PENETRATION[J]. Acta Metallurgica Sinica (English Letters), 1993, 6(8): 130-136.

[1]	Ming He, Xian-Liang Li, Xing-An Liu, Xiao-Wei Zhu, Tie Liu, Qiang Wang. Coil Ambient Temperature and Its Influence on the Formation of Blocking Layer in the Electromagnetic Induction-Controlled Automated Steel-Teeming System [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(3): 391-400.
[2]	Haichao CUI, Fenggui LU, Xinhua TANG,Shun YAO. Particles migration behavior during laser keyhole welding of ZL101/TiB₂ composites [J]. Acta Metallurgica Sinica (English Letters), 2012, 25(3): 190-200.
[3]	Ji CHEN, Chuansong WU. Effect of droplet heat content distribution on humping formation in high speed GMAW [J]. Acta Metallurgica Sinica (English Letters), 2011, 24(6): 457-465.
[4]	W.F. Wu, Y.H. Feng , X.X. Zhang. HEAT TRANSFER ANALYSIS DURING ROLLING OF THIN SLAB IN CSP [J]. Acta Metallurgica Sinica (English Letters), 2006, 19(4): 244-250 .
[5]	M.Y. Gu, G. Chen, M.C. Zhang , X.C. Dai. SIMULATION OF STEEL COIL HEAT TRANSFER IN HPH FURNACE [J]. Acta Metallurgica Sinica (English Letters), 2005, 18(5): 647-652 .
[6]	W.Q, Zhang, L.Xiao. NUMERICAL SIMULATION OF CELLULAR／DENDRITIC PRIMARY SPACING [J]. Acta Metallurgica Sinica (English Letters), 2004, 17(5): 761-766 .
[7]	J.S. Sun, J.Q. Gao, Y. Feng , Y.W. Luan. Influence of Surface-Active Elements on Fluid Flow of MIG Weldpool [J]. Acta Metallurgica Sinica (English Letters), 2004, 17(2): 189-193 .
[8]	D.N.Zou, J.Yang, Y.L.Huang , J.Y.Su. NUMERICAL ANALYSIS OF HEAT TRANSFER DURING LASER CLADDING TO SYNTHESIZE TiCp/Al COMPOSITE [J]. Acta Metallurgica Sinica (English Letters), 2004, 17(1): 1-6 .
[9]	S. Fedosov Samara State Technical University, Galaktionovskaya 141, Samara 443010, Russia. "THERMO": COMPUTER PROGRAM FOR SIMULATION OF SURFACE PULSE HEATING [J]. Acta Metallurgica Sinica (English Letters), 2000, 13(2): 557-560.
[10]	K. Deng, Z.M. Ren, J.Q. Chen and G.C. Jiang School of Materials, Shanghai University, Shanghai 200072, China. THE ELECTROMAGNETIC FIELD CALCULATION AND ANALYSIS OF LEVITATION MELTING WITH COLD CRUCIBLE [J]. Acta Metallurgica Sinica (English Letters), 2000, 13(2): 702-707.
[11]	S. W Ma, J.C, He and H.S. Di 1) School of Materials and Metallurgy, Northeastern University, Shenyang 110006, China 2) The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110006, China. NUMERICAL STUDY ON 3-D FLUID FLOW WITHIN THE MOLTEN POOL DURING UNEQUAL DIAMETER TWIN ROLL STRIP CAST-ROLLING [J]. Acta Metallurgica Sinica (English Letters), 2000, 13(2): 728-733.
[12]	L.L. Chen, R.X. Liu and H.T. Lin College of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China. NUMERICAL SIMULATION OF CASTING PROCESS [J]. Acta Metallurgica Sinica (English Letters), 2000, 13(2): 764-769.
[13]	J.F. Sun, J. Shen, Z. Y. Li, J. Jia and Q.C. Li National Key Laboratory of Metal Precision Hot Processing, Harbin Institute of Technology, Harbin 150001, China. HEAT TRANSFER BEHAVIOR OF SUPERALLOY DROPLETS DURING SPRAY FORMING [J]. Acta Metallurgica Sinica (English Letters), 2000, 13(2): 800-805.
[14]	Y. H. Li; M. Krzyzanowski; J. H. Beynon and C. M. Sellars IMMPETUS( Institute for Microstructural and Mechanical Process Engineering: The University of Sheffield, Sheffield SI 3JD, UK). PHYSICAL SIMULATION OF INTERFACIAL CONDITIONS IN HOT FORMING OF STEELS [J]. Acta Metallurgica Sinica (English Letters), 2000, 13(1): 359-368.
[15]	W.Q. Zhang; Q.M. Liu; Y.F. Zhu; Y.S. Yang and Z.Q. Hu(State Key Laboratory of RSA, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110015, China). STUDY ON STRUCTURES OF Al-CuAl_2 EUTECTIC SOLIDIFIED UNDER ELECTROMAGNETIC STIRRING [J]. Acta Metallurgica Sinica (English Letters), 1997, 10(6): 461-464.

NUMERICAL ANALYSIS OF THREE-DIMENSIONAL FLUID FLOW AND HEAT TRANSFER IN TIG WELD POOL WITH FULL PENETRATION

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments