[1] |
U. K. Tarai, P. S. Robi, Sukhomay Pal.
Thermal Properties of Ni-Cr-Si-B-Fe Based Interlayer Material and Its Application in TLP Bonding of IN 718 Superalloy
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1666-1680.
|
[2] |
J. Esquivel, R. K. Gupta.
Corrosion Behavior and Hardness of Al-M (M: Mo, Si, Ti, Cr) Alloys
[J]. Acta Metallurgica Sinica (English Letters), 2017, 30(4): 333-341.
|
[3] |
Jie Wu, Zhao-Tai Yang, Hong-Zhi Cui, Na Wei, Xiao-Jie Song.
Fabrication, Pore Structures and Mechanical Properties of (TiB2-Al2O3)/NiAl Porous Composites
[J]. Acta Metallurgica Sinica (English Letters), 2017, 30(12): 1145-1154.
|
[4] |
Ruo-Shan Lei, Ming-Pu Wang.
Effect of Milling Tools on the Microstructure and Property of Cu-Based Composites Prepared by Mechanical Alloying
[J]. Acta Metallurgica Sinica (English Letters), 2017, 30(12): 1155-1162.
|
[5] |
Sayyed Erfan Aghili,Mohammad Hossein Enayati,Fathallah Karimzadeh.
Fabrication of Bulk (Fe,Cr)3Al/Al2O3 Intermetallic Matrix Nanocomposite Through Mechanical Alloying and Sintering
[J]. Acta Metallurgica Sinica (English Letters), 2016, 29(10): 911-919.
|
[6] |
Alvaro Torres, Sergio Serna, Cristobal Pati, o, Gerardo Rosas.
Corrosion Behavior of Ψ and β Quasicrystalline Al-Cu-Fe Alloy
[J]. Acta Metallurgica Sinica (English Letters), 2015, 28(9): 1117-1122.
|
[7] |
Mohammad Hossein Enayati, Fathallah Karimzadeh, Soheil Sabooni, Majid Jafari.
Phase Stability in Mechanically Alloyed Mg-Ni System Studied by Experiments and Thermodynamic Calculations
[J]. Acta Metallurgica Sinica (English Letters), 2015, 28(8): 1002-1007.
|
[8] |
Chong-Feng Sun, Sheng-Qi Xi, Yue Zhang, Xiao-Xue Zheng, Jing-En Zhou.
Thermodynamic Characteristic and Phase Evolution in Immiscible Cr-Mo Binary Alloys
[J]. Acta Metallurgica Sinica (English Letters), 2015, 28(8): 1074-1081.
|
[9] |
Na Wei, Hong-Zhi Cui, Jie Wu, Jun Wang, Guan-Long Wang, Chen Jiang.
Effects of Forming Conditions and TiC-TiB2 Contents on the Microstructures of Self-Propagating High-Temperature Synthesized NiAl-TiC-TiB2 Composites
[J]. Acta Metallurgica Sinica (English Letters), 2015, 28(1): 39-47.
|
[10] |
Tingdong ZHOU, Zhengyun WANG, Jiangkang TANG, Haipeng LU.
Structure and magnetic properties of Fe-based powders prepared by mechanical alloying
[J]. Acta Metallurgica Sinica (English Letters), 2010, 23(5): 351-356.
|
[11] |
X.H. Wei , F. Ono.
Anomalous Effect of Pressure on the Curie Temperature in Mechanically Alloyed Fe-Ni Invar
[J]. Acta Metallurgica Sinica (English Letters), 2007, 20(3): 205-209 .
|
[12] |
Y.Z. Yang, X.J. Bai, T.C. Kuang.
EXAFS STUDY OF THE SHORT RANGE STRUCTURE OF NANOCRYSTALLINE BCC-Fe80Cu20 SOLID SOLUTION
[J]. Acta Metallurgica Sinica (English Letters), 2002, 15(3): 307-311 .
|
[13] |
W.H. Tian.
PRECIPITATION HARDENING IN B2-ORDERED NiAl BY Ni2AlTiCOMPOUND
[J]. Acta Metallurgica Sinica (English Letters), 2001, 14(5): 313-318 .
|
[14] |
X.H.Qu; J.L. Fan, Y.M. Li and B. Y Huang(The State Key Laboratory for Powder Metallurgy, Central South University of Technology, Changsha410083, China).
SYNTHESIS AND SOLID STATE SINTERING OF W-Ni-Fe NANO-COMPOSITE POWDERS
[J]. Acta Metallurgica Sinica (English Letters), 2000, 13(3): 917-920.
|
[15] |
W.H. Tian; S.L. Hu and M. Nemoto(1) Department of Materials Physics, University of Science and Technology Beijing, Beijing 100083, China 2) Department of Materials Forming, University of Science and Technology Beijing, Beijing 100083, China 3) Department of Materials Science and Engineering, Faculty of Engineering, Kyushu University, Fukuoka 812, Japan)Manuscript received in revised form 12 October 1998.
EFFECT OF Cr ADDITION ON MICROSTRVCTURES AND MECHANICAL PROPERLIES OF β-NiAl ALLOYS
[J]. Acta Metallurgica Sinica (English Letters), 1999, 12(2): 173-180.
|