EFFECT OF HIGH TEMPERATURE DEFORMATION ON MORPHOLOGY OF Nd-RICH PHASE PARTICLES IN Ti-5Al-4Sn-2Zr-1MO-0.25Si-1Nd ALLOY

Abstract

Abstract: The morphologies of the Nd-rich phase particles in the Ti-5Al-4Sn-2Zn -1Mo-0.25Si-1Nd alloy after high temperature deformation are investigaied by optical microscope and transmission electron microscope. It is found that the Nd-rich phase particles are 1.0～14 μm in diameter and uniformly distributed in ihe matrix, and the majority of the particles are elliptical. Under high temperature deformaiton, high stress concentration occurs on the particles, the particles near to sphericity are obtained.

Key words: Ti alloy, Nd-rich phase, de formation

LI Geping; GUAN Shaoxuan; WANG Qingjiang; LIU Yuyin; LI Dong; HU Zhuangqi (Institute of Metal Researeh, Chinese Academy of Sciences, Shenyang, China Manuscript received 23 January. 1995). EFFECT OF HIGH TEMPERATURE DEFORMATION ON MORPHOLOGY OF Nd-RICH PHASE PARTICLES IN Ti-5Al-4Sn-2Zr-1MO-0.25Si-1Nd ALLOY[J]. Acta Metallurgica Sinica (English Letters), 1995, 8(1): 59-64.

[1]	Zhiying Zheng, Linjiang Chai, Kang Xiang, Weijiu Huang, Yongfeng Wang, Liangliang Liu, Lin Tian. Typical Microstructural Characteristics of Ti-5Al-5Mo-5V-3Cr-1Fe Metastable β Ti Alloy Forged in α+β Region [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1601-1608.
[2]	Wei Liu, Hua-Ping Xiong, Neng Li, Shao-Qing Guo, Ren-Yao Qin. Microstructure Characteristics and Mechanical Properties of Nb-17Si-23Ti Ternary Alloys Fabricated by In Situ Reaction Laser Melting Deposition [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(4): 362-370.
[3]	Ji-Ying Xia, Lin-Jiang Chai, Hao Wu, Yan Zhi, Yin-Ning Gou, Wei-Jiu Huang, Ning Guo. EBSD Study of Microstructural and Textural Changes of Hot-Rolled Ti-6Al-4V Sheet After Annealing at 800 °C [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(11): 1215-1223.
[4]	Ignacio A. Figueroa 1, Sandro Baez-Pimiento, John D. Plummer,Omar Novelo-Peralta,Hywell A. Davies,Iain Todd . A detailed study of metallic glass formation in copper-hafnium-titanium alloys [J]. Acta Metallurgica Sinica (English Letters), 2012, 25(6): 409-419.
[5]	Y.L. Yang, G.J. Zhao, D. Zhang. IMPROVING THE SURFACE PROPERTY OF TC4 ALLOY BY LASER NITRIDING AND ITS MECHANISM [J]. Acta Metallurgica Sinica (English Letters), 2006, 19(2): 151-156 .
[6]	Z. K. Yao; H. Z. Cuo;M. Wang;F. Lan and P. F. Feng (Northwestern Polytechnical University, Xi' an 710072, China). PHYSICAL MODELLING OF ISOTHERMAL DIE FORGING PROCESS OF Ti-ALLOY STRUCTURAL AIR-FRAME PART WITH E TYPE CROSS-SECTION AND VARYING THICKNESS RIB [J]. Acta Metallurgica Sinica (English Letters), 2000, 13(1): 401-405.
[7]	G.P.Li;D.Li; Y.Y.Liu; S.X. Guan and Q.J.Wang (Department of Titanium Alloys, Institute of Metal Research, The Chinese Academy of Sciences, Shenyang 110015, China). Nd-RICH PHASE PARTICLES IN AS-FORGED Ti-5Al-4Sn-2Zr-1Mo-0.25Si-1Nd ALLOY [J]. Acta Metallurgica Sinica (English Letters), 1998, 11(4): 261-264.
[8]	G.P.Li; D.Li and Y. Y. Liu (Department of Titanium Alloys, Institute of Metal Research, The Chinese Academy of Sciences, Shenyang 110015, China). NUCLEATION OF RARE EARTH-RICH PHASE PARTICLES IN Ti-5Al-4Sn-2Zr-1Mo-0.25Si-1Nd ALLOY [J]. Acta Metallurgica Sinica (English Letters), 1998, 11(4): 265-269.
[9]	M. V. Nathal (NASA Lewis Research Center Cleveland OH. USA). HIGH TEMPERATURE COMPOSITES [J]. Acta Metallurgica Sinica (English Letters), 1995, 8(z1): 467-476.
[10]	WANG Qian; WANG Jian; WENG Xiaojun; SUN Jian; CHEN Shipu;HU Gengxiang (Shanghai Jiaotong University, Shanghai 200010. China). DEVELOPING MULTIPHASE AL_3Ti ALLOYS [J]. Acta Metallurgica Sinica (English Letters), 1995, 8(z1): 489-496.
[11]	LI Geping;LIU Yuyin;LI Dong;HU Zhuangqi(Institute of Metal Research,Chinese Academy of Sciences,Shenyang China Manuscript received 19 October 1994). MICROSTRUCTURE OF AS-MELT-QUENCHED Ti-Si-Nd ALLOY [J]. Acta Metallurgica Sinica (English Letters), 1995, 8(2): 84-87.
[12]	LI Geping, LI Dong, LIU Yuyin, HU ZhuangqiInstitute of Metal Research, Chinese Academy of Sciences, Shenyang,China. DISTRIBUTION OF Nd-RICH PHASE PARTICLES IN AS-CAST Ti-5Al-4Sn-2Zr-lMo-0.25Si-1Nd ALLOY [J]. Acta Metallurgica Sinica (English Letters), 1994, 7(3): 215-219.
[13]	LIU Jian QIU Baoqin LIU Muyi XIAO Yaofu University of Science and Technology Beijing,Beijing,China associate professor,Department of Materials,University of Science and Technology Beijing,Beijing 100083,China. TRANSFORMATION OF Nd_(14)Fe_(73)Co_6B_7 ALLOY UNDER HYDROGEN TREATMENT [J]. Acta Metallurgica Sinica (English Letters), 1993, 6(6): 379-382.
[14]	SU Zuwu MENG Guowen GUO Hongzhen LIU Jianchao YAO Zekun Northwestern Polytechnical University,Xi'an,ChinaYANG Zhaosu HU Zongshi Baoji Non-Ferrous Metals Mill,Baoji,China. EQUIAXED REFINEMENT OF GRAINS IN ALLOY TC11 [J]. Acta Metallurgica Sinica (English Letters), 1992, 5(8): 83-86.
[15]	ZHOU Yu ZHO U Yigang YU Hanqing Northwestern Polytechnical University,Xi'an,China. CLEAVAGE RUPTURE OF Ti ALLOY TC11 UNDER FATIGUE-CREEP INTERACTION [J]. Acta Metallurgica Sinica (English Letters), 1992, 5(5): 341-344.

EFFECT OF HIGH TEMPERATURE DEFORMATION ON MORPHOLOGY OF Nd-RICH PHASE PARTICLES IN Ti-5Al-4Sn-2Zr-1MO-0.25Si-1Nd ALLOY

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments