[1] |
U. K. Tarai, P. S. Robi, Sukhomay Pal.
Thermal Properties of Ni-Cr-Si-B-Fe Based Interlayer Material and Its Application in TLP Bonding of IN 718 Superalloy
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1666-1680.
|
[2] |
Zheng-Guan Lu, Jie Wu, Lei Xu, Rui Yang.
Powder Size Influence on Tensile Properties and Porosity for PM Ti2AlNb Alloy Prepared by Hot Isostatic Pressing
[J]. Acta Metallurgica Sinica (English Letters), 2019, 32(11): 1329-1336.
|
[3] |
Abdollah Saboori, Matteo Pavese, Claudio Badini, Paolo Fino.
A Novel Cu-GNPs Nanocomposite with Improved Thermal and Mechanical Properties
[J]. Acta Metallurgica Sinica (English Letters), 2018, 31(2): 148-152.
|
[4] |
Rui-Peng Guo, Lei Xu, Bernie Ya-Ping Zong, Rui Yang.
Characterization of Prealloyed Ti-6Al-4V Powders from EIGA and PREP Process and Mechanical Properties of HIPed Powder Compacts
[J]. Acta Metallurgica Sinica (English Letters), 2017, 30(8): 735-744.
|
[5] |
J. Esquivel, R. K. Gupta.
Corrosion Behavior and Hardness of Al-M (M: Mo, Si, Ti, Cr) Alloys
[J]. Acta Metallurgica Sinica (English Letters), 2017, 30(4): 333-341.
|
[6] |
Ruo-Shan Lei, Ming-Pu Wang.
Effect of Milling Tools on the Microstructure and Property of Cu-Based Composites Prepared by Mechanical Alloying
[J]. Acta Metallurgica Sinica (English Letters), 2017, 30(12): 1155-1162.
|
[7] |
Mamoun Fellah, Linda Aissani, Mohammed Abdul Samad, Alain Iost, Touhami Mohamed Zine, Alex Montagne, Corinne Nouveau.
Effect of Replacing Vanadium by Niobium and Iron on the Tribological Behavior of HIPed Titanium Alloys
[J]. Acta Metallurgica Sinica (English Letters), 2017, 30(11): 1089-1099.
|
[8] |
Sayyed Erfan Aghili,Mohammad Hossein Enayati,Fathallah Karimzadeh.
Fabrication of Bulk (Fe,Cr)3Al/Al2O3 Intermetallic Matrix Nanocomposite Through Mechanical Alloying and Sintering
[J]. Acta Metallurgica Sinica (English Letters), 2016, 29(10): 911-919.
|
[9] |
Alvaro Torres, Sergio Serna, Cristobal Pati, o, Gerardo Rosas.
Corrosion Behavior of Ψ and β Quasicrystalline Al-Cu-Fe Alloy
[J]. Acta Metallurgica Sinica (English Letters), 2015, 28(9): 1117-1122.
|
[10] |
Mohammad Hossein Enayati, Fathallah Karimzadeh, Soheil Sabooni, Majid Jafari.
Phase Stability in Mechanically Alloyed Mg-Ni System Studied by Experiments and Thermodynamic Calculations
[J]. Acta Metallurgica Sinica (English Letters), 2015, 28(8): 1002-1007.
|
[11] |
Chong-Feng Sun, Sheng-Qi Xi, Yue Zhang, Xiao-Xue Zheng, Jing-En Zhou.
Thermodynamic Characteristic and Phase Evolution in Immiscible Cr-Mo Binary Alloys
[J]. Acta Metallurgica Sinica (English Letters), 2015, 28(8): 1074-1081.
|
[12] |
Xiao-Meng Wang, Yu Zhou, Zi-Hua Zhao, Zheng Zhang.
Microstructural Evolution of Creep-Induced Cavities and Casting Porosities for a Damaged Ni-based Superalloy Under Various Hot Isostatic Pressing Conditions
[J]. Acta Metallurgica Sinica (English Letters), 2015, 28(5): 628-633.
|
[13] |
Tingdong ZHOU, Zhengyun WANG, Jiangkang TANG, Haipeng LU.
Structure and magnetic properties of Fe-based powders prepared by mechanical alloying
[J]. Acta Metallurgica Sinica (English Letters), 2010, 23(5): 351-356.
|
[14] |
X.H. Wei , F. Ono.
Anomalous Effect of Pressure on the Curie Temperature in Mechanically Alloyed Fe-Ni Invar
[J]. Acta Metallurgica Sinica (English Letters), 2007, 20(3): 205-209 .
|
[15] |
Y.Z. Yang, X.J. Bai, T.C. Kuang.
EXAFS STUDY OF THE SHORT RANGE STRUCTURE OF NANOCRYSTALLINE BCC-Fe80Cu20 SOLID SOLUTION
[J]. Acta Metallurgica Sinica (English Letters), 2002, 15(3): 307-311 .
|