[1] |
Mohamad Ebrahimnia, Yujiang Xie, Changtai Chi.
Effect of laser power and deposition environment on the microstructure and properties of direct laser metal-deposited 12CrNi2 steel
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(4): 528-538.
|
[2] |
Hamid Ashrafi, Morteza Shamanian, Rahmatollah Emadi, Ehsan Ghassemali.
Void Formation and Plastic Deformation Mechanism of a Cold-Rolled Dual-Phase Steel During Tension
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(2): 299-306.
|
[3] |
Xin He, Jianbo Zhang, Yuanyi Peng, Jingan Li, Jian Ding, Chang Liu, Xingchuan Xia, Xueguang Chen, Yongchang Liu.
Microstructure Evolution of Primary γ′ Phase in Ni3Al-Based Superalloy
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1709-1726.
|
[4] |
Z. D. Fan, D. Wang, C. Liu, G. Zhang, J. Shen, L. H. Lou, J. Zhang.
Low-Cycle Fatigue Properties of Nickel-Based Superalloys Processed by High-Gradient Directional Solidification
[J]. Acta Metallurgica Sinica (English Letters), 2017, 30(9): 878-886.
|
[5] |
Ren-Guo Guan, Di Tie.
A Review on Grain Refinement of Aluminum Alloys: Progresses, Challenges and Prospects
[J]. Acta Metallurgica Sinica (English Letters), 2017, 30(5): 409-432.
|
[6] |
Tan He,Rui Hu,Tie-Bang Zhang,Jin-Shan Li.
Effect of Nb Content on Solidification Characteristics and Microsegregation in Cast Ti-48Al-xNb Alloys
[J]. Acta Metallurgica Sinica (English Letters), 2016, 29(8): 714-721.
|
[7] |
Hui-Jun Kang, Zhong-Lue Hu, Xiao-Xia Gao, Zong-Ning Chen, Yi-Ping Lu, Jin-Chuan Jie, Jing-Jie Guo.
3D Morphology and Formation Process of the Icosahedral Quasicrystalline Phase in Rapidly Solidified Al-Mn Alloy
[J]. Acta Metallurgica Sinica (English Letters), 2016, 29(1): 28-31.
|
[8] |
Tan He, Rui Hu, Jun Wang, Jie-Ren Yang, Jin-Shan Li.
Effects of β-Dendrite Growth Velocity on β → α Transformation of Hypoperitectic Ti-46Al-7Nb Alloy
[J]. Acta Metallurgica Sinica (English Letters), 2015, 28(1): 58-63.
|
[9] |
Dan-Hui Hou, Song-Mao Liang, Rong-Shi Chen, Chuang Dong, En-Hou Han.
Effects of Sb Content on Solidification Pathways and Grain Size of AZ91 Magnesium Alloy
[J]. Acta Metallurgica Sinica (English Letters), 2015, 28(1): 115-121.
|
[10] |
Wenjing YAO, Xiuling NIU, Long ZHOU, Nan WANG, Jehyun LEE.
Competition Growth of α and β Phases in Ti-50 at.%Al Peritectic Alloy during the Rapid Solidification by Laser Melting Technique
[J]. Acta Metallurgica Sinica (English Letters), 2013, 26(5): 523-532.
|
[11] |
Zhongwei CHEN,Cuiying MA,Jing ZHAO .
Eutectic nucleation in Al-7 wt pct Si-Mg casting alloys
[J]. Acta Metallurgica Sinica (English Letters), 2012, 25(5): 340-346.
|
[12] |
Gang WANG, Dechang ZENG, Zhongwu LIU.
Nucleation barrier height in undercooled metallic melts
[J]. Acta Metallurgica Sinica (English Letters), 2012, 25(4): 256-264.
|
[13] |
Renguo GUAN, Zhanyong ZHAO,Runze CHAO, Hongqian HUANG,Chunming LIU.
Heat transfer and grain refining mechanism during melt treatment by cooling sloping plate
[J]. Acta Metallurgica Sinica (English Letters), 2012, 25(4): 320-328.
|
[14] |
Keijiro HIRAGA, Byung-Nam KIM, Koji MORITA, Hidehiro YOSHIDA, Yoshio SAKKA, Masaaki TABUCHI.
High-strain-rate superplasticity in oxide ceramics: a trial of microstructural design based on creep-cavitation mechanisms
[J]. Acta Metallurgica Sinica (English Letters), 2011, 24(3): 195-204.
|
[15] |
Z.M. Zhang, C.J. Xu, X.F. Guo.
Microstructre of Mg-6.4Zn-1.1Y Alloy Fabricatec by Rapid Solidification and Reciprocating Extrusion
[J]. Acta Metallurgica Sinica (English Letters), 2008, 21(1): 30-36 .
|