THE INFLUENCES OF Zn CONTENT AND COOLING RATE ON ASCAST  MICROSTRUCTURE IN Al75% Mg ALLOYS

Search for articles:

Acta Metallurgica Sinica (English Letters) ›› 1999, Vol. 12 ›› Issue (4): 521-527.

• Research paper • Previous Articles Next Articles

THE INFLUENCES OF Zn CONTENT AND COOLING RATE ON ASCAST MICROSTRUCTURE IN Al75% Mg ALLOYS

Q.Wu1)and S.B.Kang2) 1) Department of Material Science and Engineering, Nanjing University of Science and Technology , Nanjing,210014 ,China 2) Department of Material Engineering ,Korea Institute of Mechanics and Materials,Changwon , Korea

Received:1999-08-25 Revised:1999-08-25 Online:1999-08-25 Published:2009-10-10

Abstract

Q.Wu1)and S.B.Kang2) 1) Department of Material Science and Engineering, Nanjing University of Science and Technology , Nanjing,210014 ,China 2) Department of Material Engineering ,Korea Institute of Mechanics and Materials,Changwon , Korea. THE INFLUENCES OF Zn CONTENT AND COOLING RATE ON ASCAST MICROSTRUCTURE IN Al75% Mg ALLOYS[J]. Acta Metallurgica Sinica (English Letters), 1999, 12(4): 521-527.

About AMSE

Authors and reviewers

Contact

WeChat

[1]	Quan Wen, Wenya Li, Vivek Patel, Luciano Bergmann, Benjamin Klusemann, Jorge F. dos Santos. Assessing the Bonding Interface Characteristics and Mechanical Properties of Bobbin Tool Friction Stir Welded Dissimilar Aluminum Alloy Joints [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(1): 125-134.
[2]	Xiong-Wei Yu, Jiang-Hua Chen, Wen-Quan Ming, Xiu-Bo Yang, Tian-Tian Zhao, Ruo-Han Shen, Yu-Tao He, Cui-Lan Wu. Revisiting the Hierarchical Microstructures of an Al-Zn-Mg Alloy Fabricated by Pre-deformation and Aging [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(11): 1518-1526.
[3]	Fengjiao Niu, Jianghua Chen, Cuilan Wu, Jing Wu, Xiandong Xu, Pan Xie, Xiongwei Yu. Improved Properties in Relation to Fine Precipitate Microstructures Tailored by Combinatorial Processes in an Al-Cu-Mg-Si Alloy [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(11): 1527-1534.
[4]	Wei-Ning Shi, Hai-Fei Zhou, Xin-Fang Zhang. Effects of Al₈Cu₄Er Phase on Corrosion Behavior of Al-Cu-Mg alloy with Er addition [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(10): 1379-1387.
[5]	Zhixiong Zhu, Xingxu Jiang, Gang Wei, Xiaogang Fang, Zhihong Zhong, Kuijing Song, Jian Han, Zhengyi Jiang. Influence of Zn Content on Microstructures, Mechanical Properties and Stress Corrosion Behavior of AA5083 Aluminum Alloy [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(10): 1369-1378.
[6]	Hua Zhang, Chang-Yu Zhao, Qi-Long Guo, Rui-Sheng Yang, Li-Yuan Liu, San-Bao Lin. Microstructure and Corrosion Behavior of Friction Stir Welded Al Alloy Coated by In Situ Shot-Peening-Assisted Cold Spray [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(1): 172-182.
[7]	Hiang-Jie Jiang, Bing Zhang, Chong-Yu Liu, Zhen-Xing Yang, Zong-Yi Ma. Mechanical and Damping Behavior of Age-Hardened and Non-age-hardened Al Alloys After Friction Stir Processing [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(9): 1135-1141.
[8]	Jun-Xia Lu, Ling Chang, Shi-Kai Wu, Shi-Kun Yin. Dendritic Boundary Corrosion of AA2198 Weld Using Fiber Laser Welding with Al-Cu Filler Wire [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(7): 735-741.
[9]	Farhad Bakhtiari Argesi, Ali Shamsipur, Seyyed Ehsan Mirsalehi. Dissimilar Joining of Pure Copper to Aluminum Alloy via Friction Stir Welding [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(11): 1183-1196.
[10]	Saad B. Aziz, Mohammad W. Dewan, Daniel J. Huggett, Muhammad A. Wahab, Ayman M. Okeil, T. Warren Liao. A Fully Coupled Thermomechanical Model of Friction Stir Welding (FSW) and Numerical Studies on Process Parameters of Lightweight Aluminum Alloy Joints [J]. Acta Metallurgica Sinica (English Letters), 2018, 31(1): 1-18.
[11]	Yu-Gang Miao, Guang-Yu Chen, Peng Zhang, Duan-Feng Han. Comparative Study of Bypass-Current MIG Welded-Brazed Aluminum/Galvanized Steel and Aluminum/Stainless Steel [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(8): 721-730.
[12]	Lan-Qiang Niu, Xiao-Yan Li, Liang Zhang, Xiao-Bo Liang, Mian Li. Correlation Between Microstructure and Mechanical Properties of 2219-T8 Aluminum Alloy Joints by VPTIG Welding [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(5): 438-446.
[13]	J. Esquivel, R. K. Gupta. Corrosion Behavior and Hardness of Al-M (M: Mo, Si, Ti, Cr) Alloys [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(4): 333-341.
[14]	Jun-Gang Ren, Lei Wang, Dao-Kui Xu, Li-Yang Xie, Zhan-Chang Zhang. Analysis and Modeling of Friction Stir Processing-Based Crack Repairing in 2024 Aluminum Alloy [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(3): 228-237.
[15]	Xin-Jie Di, Hui-Juan Xie, Cui-Xin Chen, Cai-Yan Deng, Dong-Po Wang. Microstructural Evolution and Softening Behavior of Simulated Heat-Affected Zone in 2219 Aluminum Alloy [J]. Acta Metallurgica Sinica (English Letters), 2017, 30(12): 1177-1184.

THE INFLUENCES OF Zn CONTENT AND COOLING RATE ON ASCAST MICROSTRUCTURE IN Al75% Mg ALLOYS

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments