SOME DEVELOPMENTS IN RAPIDLY SOLIDIFIED ALUMINUM ALLOYS  FOR ELEVATED TEMPERATURE APPLICATIONS

Abstract

Abstract: Therecent developments in elevated temperature ( ET) aluminum alloys prepared by therapidsolidification / powder metallurgy ( RS P/ M) process were reviewed briefly. TheRS P/ METaluminum alloyscan beclassified as(a) the aluminum transition metaltype, such as Al Fe, Al Cr, Al Ti, Al Zrsystem alloys,etc.,and (b) thealuminum rareearth elementtype,such as Al Y, Al Nd system alloys,etc. Among them ,the Al Fe and Al Ti system alloysarethe most attractive, which possessthe potentialto replacethetitanium alloy partson aircraft,engines,etc.,fortheuseattemperaturesrangingfrom 200 315℃. Theproblemsin applicationsfor RS P/ M ETaluminum alloys werealso discussed .

Key words: rapidsolidification / powder metallurgy, elevatedtemperaturealuminum alloys, dispersoids, coarsening rate

P.Y. Li, S.L. Dai, C.Y. Li and B.C. Liu Beijing Institute of Aeronautical Materials,P.O.Box 81 2 ,Beijing 150001 , China. SOME DEVELOPMENTS IN RAPIDLY SOLIDIFIED ALUMINUM ALLOYS FOR ELEVATED TEMPERATURE APPLICATIONS[J]. Acta Metallurgica Sinica (English Letters), 1999, 12(4): 452-461.

References

1 F. H.Froesand R.Carbonara,J. Met.40 (2) (1988) 20 .
2 Metals Handbook, Ninth Edition,Vol.7 (ASM, Warrendale,PA,1984) p.25.
3 Metals Handbook, Tenth Edition, Vol.2 (ASM, Warrendale,PA,1990) p.206.
4 M.J.Couperand R.F.Singer,in Processing of Structural Metals by Rapid Solidification ,eds.F. H.Froesand S.J.Savage ( ASMInternational, Metals Park ,OH,1987) p.273.
5 I. M.Lifshitzand V.V.Slyozov, J. Phys. Chem . Sol.19(1961) 35.
6 C. Wagner, Z. Electrochem 65(1961) 581.
7 P. W.Voorkheesand M.E.Glicksman , Metall. Trans. A15 (1984) 1081.
8 H.Buhl, Advanced Aerospace Materials (SpringerVerlag,Berlin ,1952) p.47.
9 S.K. Das,in Microstructure of Materials,ed. K. M. Krishnan (San Fransico Press, CA,1993) p.30.
10 E.J.Lavernia,J.D.Ayersand T.S. Srivatsan , Inter. Mater. Rev .37 (1992) 1 .
11 M.E.Fine.in Dispersion Strengthened Aluminu m Alloys,eds.YW.Kim and W. M.Griffith(TMS, Warrendale,PA,1988) p.103 .
12 R.J.Towner, Metal Progress73(5) (1958) 70 .
13 R. M. German . Powder Metallurgy Science(Metal Powder Industries Federation ,Princeton ,1984)
14 R.l.Bye, N.J. Kim , D.J.Skinner,D. Raybould and A. M.Brown ,in Processing ofStructural Metalsby Rapid Solidification ,eds.F. H.Froes and S.J.Savage ( ASMInternational, Metals Park,OH,1987) p.283 .
15 G.H.Narayanan, W. H.Graham and W.E.Quist,A.L. Wingertand T. M.Ronald ,in Processing of Structural Metals by Rapid Solidification ,eds.F.H.Froes and S.J.Savage (ASMInternational, Metals Park ,OH,1987) p.321.
16 H.H.Libermann and R.L.Bye,in Rapidly Solidified Crystalline Alloys,eds.S. K. DasandB.H. Keer(AIME, Warrendale,PA,1985) p .61 .
17 S.K.Das,R.L.Bye and P.S.Gilman. Mater. Sci. Eng . A134 (1991) 1103.
18 M.P.Thomas,I.G.Palmerand C.Baker,in Processing of Structural Metalsby Rapid Solidification ,eds.F.H.Froesand S.J.Savage ( ASMInternational, Metals Park ,OH,1987)p.337 .
19 C. M.Adam and R.E.Lewis,in Rapidly Solidified Crystalline Alloys,eds.S.K.Dasand B.H. Keern (AIME, Warrendale,PA,1985) p.157 .
20 D.Raybould.in Dispersion Strengthened Alu minum Alloys,eds.YW.Kim and W. M. Griffith (TMS, Warrendale,PA,1988) p.199 .
21 YW. Kim .in Dispersion Strengthened Aluminum Alloys,eds.YW.Kim and W. M.Griffith(TMS, Warrendale,PA,1988) p.157 .
22 K.S.Chan.in Dispersion Strengthened Aluminu m Alloys,eds.YW.Kim and W. M.Griffith(TMS, Warrendale,PA,1988) p.283 .
23 M.Zedalis,D.Raybould,D.J.Skinnerand S.K.Das.in Processing of Structural MetalsbyRapid Solidification ,eds.F.H.Froesand S.J.Savage (ASMInternational, Metals Park ,OH,1987) p.347.
24 S.L.Dai,PhDThesis,Beijing Institute of Aeronautical Materials (Beijing) (1993).
25 I.G.Palmer,M.P.Thomasand G.J. Marshall.in Dipersion Strengthened Aluminu m Alloys,eds.Y. W.Kim and W. M.Griffith (TMS, Warrendale,PA,1988) p.217 .
26 M.S.Chuang,G.C.Tu and K.Shimiza. J. Jpn . Int. Light Met.45 (1995) 497 .
27 M.S.Chuang and G.C.Tu. Scripta . Metall. Mater.33 (1995) 1999.
28 R.Parameswaran,J.R. Weertman and M.E.Fine. Scr. Metall.23(1989) 147.
29 H.Lee,S.Z.Han, H. M.Lee and Z.H.Lee. Mater. Sci. Eng . A163 (1993) 81.
30 K.Kita.European Patent EP0606572A1 (20 July 1994) .
31 Y.Kawamura,H.B.Liu,A.Inoueand T. Masamoto. Scr. Mater .37 (1995) 205 .
32 P.Y.Li,D.B.Liu,S.L.Daiand H.S.Jiao.J. Mater. Eng .(Supplement) (1997) 61(in Chinese).
33 J.A.Hawk,L. M.Angersand H.G.F. Wilsdorf.in Dispersion Strengthened Aluminum Alloys,eds.Y. W.Kim and W. M.Griffith (TMS, Warrendale,PA,1988) p.337.
34 H. Kimura,A.Inoue,K.Sasamoriand K.Kita. J.Jpn . Inst. Light Met.48 (1997) 263 .
35 H. Kimura,A.Inoue,K.Sasamoriand Y.Kawamura.J.Jpn . Int. Light Met.47 (1997)539 .
36 C. M.Adam and R.G.Bourdeau .in Rapid Solidification Processing ,eds. Mehrabian et al.(Boton Rouge,1980) p.246.
37 D.J.Skinner,R.L.Bye,D.Raybould and A. M.Brown ,. Scr. Metall.20 (1986) 867 .
38 O.S. Zarechnyuk, M. G. Msykiv, V. R. Ryabov and I.I. Dikly. Russian Metall. 3(1968) 152 .
39 R.Ager,L. M.Angers,R.R. Mueller,J.C.Scanbon and C.F.Klein. Metall. Trans.A19A(1988) 1645.
40 M.Cooper, Acta Cryst 23 (1967) 1106 .
41 D.J.Skinner,R.L.Bye,D.Raybould,A. M.Brown and M.S.Zedalis,in Processing ofStructural Metals by Rapid Solidification ,eds.F. H.Froes and S.J.Savage ( ASMInternational, Metals Park,OH,1987) p.291 .
42 D.J.Skinner.in Dispersion Strengthened Aluminum Alloys,eds.YW.Kim and W. M.Griffith (TMS, Warrendale,PA,1988) p.181 .
43 J.F. Nie,S.Sridhara and B.C. Muddle, Metall. Trans. A23 (1992) 3193 .
44 A.G.Jackson ,Y.R. Mahajan and S.D.Kirchoff, Scripta Metall.20 (1986) 1247.
45 L. M.Angers,D.G.Konitzer,J.L. Murry and W. G. Trickner,in Dispersion Strengthened Aluminum Alloys,eds.YW.Kim and W. M.Griffith (TMS, Warrendale,PA,1988)p.355 .
46 P.I.Kripyakevichand O.S.Zarechnyuk, Dokl.Akad . Nauk .Ukr. S. S. R.4 (1968) 368
47 L. M. Mondolfo, Aluminum Alloys: Structure and Properties (Butterworths, London ,1979) p .287.
48 K.S.Ravichandran and E.S.Dwarakadasa, J. Met.39 (5) (1987) 28 .
49 J.F.Faureand L.Ackermann,in Dispersion Strengthened Aluminum Alloys,eds.YW.Kimand W. M.Griffith (TMS, Warrendale,PA,1988) p.501 .
50 I.F.Sakataand S.L.Langenbeck. Aerospace Eng .(4) (1984) 5 .
51 D.J.Skinner,K.Okazakiand C. M.Adam ,in Rapid solidification Powder Aluminum Alloys,eds., M.E.Fine,and E.A.Starke,Jr.,(ASTM,1986) p.211 .
52 S.L.Langenbeck and W. M.Griffith,G.J.HildemaandJ. M.Simon ,in Rapid solidification Powder Aluminum Alloys,eds., M.E.Fine,and E.A.Starke,Jr.,(ASTM,1986)p.410 .

SOME DEVELOPMENTS IN RAPIDLY SOLIDIFIED ALUMINUM ALLOYS FOR ELEVATED TEMPERATURE APPLICATIONS

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 0

Recommended Articles

Metrics

Comments