MICROSTRUCTURE AND MECHANICAL PROPERTIES OF SiC  W/BAS (BaAl  2Si  2O  8) GLASS  CERAMIC COMPOSITE

Abstract

Abstract: BAS (BaAl 2Si 2O 8) glass ceramic was prepared by a sol gel process and the SiC W/BAS composites were fabricated by hot pressing. The transformation from hexacelsian to celsian, the microstructure and mechanical properties of the composites was investigated. The results show that the transformation promoted by adding celsian seeds is retarded in the composite by the presence of SiC whisker. SiC whisker has a good effect of improving the mechanical properties of BAS glass ceramic matrix. The toughening mechanisms are crack deflection and whisker fracture. The strengthening mechanism is loading transition. The amorphous phase at SiC W/BAS matrix interface damages the fracture toughness and high temperature strength of the composites.

Key words: glass ceramic, celsian, composite, toughening, strengthening

J.M.Yang,J.C.Lei,J.P.Li and P.Cheng Dept. Mater.Sci.and Eng. Xi'an Institute of Technology, Xi'an 710032,China. MICROSTRUCTURE AND MECHANICAL PROPERTIES OF SiC W/BAS (BaAl 2Si 2O 8) GLASS CERAMIC COMPOSITE[J]. Acta Metallurgica Sinica (English Letters), 1999, 12(5): 1130-1135.

[1]	S. Bi, B. L. Xiao, Z. H. Ji, B. S. Liu, Z. Y. Liu, Z. Y. Ma. Dispersion and Damage of Carbon Nanotubes in Carbon Nanotube/7055Al Composites During High-Energy Ball Milling Process [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(2): 196-204.
[2]	Lin-Yue Jia, Wen-Bo Du, Jin-Long Fu, Zhao-Hui Wang, Ke Liu, Shu-Bo Li, Xian Du. Obtaining Ultra-High Strength and Ductility in a Mg-Gd-Er-Zn-Zr Alloy via Extrusion, Pre-deformation and Two-Stage Aging [J]. Acta Metallurgica Sinica (English Letters), 2021, 34(1): 39-44.
[3]	Hao Wu, Si-Rui Huang, Cheng-Yan Zhu, Ji-Feng Zhang, He-Guo Zhu, Zong-Han Xie. In Situ TiC/FeCrNiCu High-Entropy Alloy Matrix Composites: Reaction Mechanism, Microstructure and Mechanical Properties [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1091-1102.
[4]	Zhigang Zhang, Xiaotong Lu, Jianrong Xu, Hongjie Luo. Characterization and Tribological Properties of Graphene/Copper Composites Fabricated by Electroless Plating and Powder Metallurgy [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(7): 903-912.
[5]	Yu-Ning Zan, Yang-Tao Zhou, Xiao-Nan Li, Guo-Nan Ma, Zhen-Yu Liu, Quan-Zhao Wang, Dong Wang, Bo-Lv Xiao, Zong-Yi Ma. Enhancing High-Temperature Strength and Thermal Stability of Al₂O₃/Al Composites by High-Temperature Pre-treatment of Ultrafine Al Powders [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(7): 913-921.
[6]	Ning Li, Cun-Lei Jia, Zhi-Wei Wang, Li-Hui Wu, Ding-Rui Ni, Zheng-Kun Li, Hua-Meng Fu, Peng Xue, Bo-Lv Xiao, Zong-Yi Ma, Yi Shao, Yun-Long Chang. Achieving a High-Strength CoCrFeNiCu High-Entropy Alloy with an Ultrafine-Grained Structure via Friction Stir Processing [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(7): 947-956.
[7]	Juan Liu, Yuze Wu, Lin Wang, Hui Wang, Charlie Kong, Alexander Pesin, Alexander P. Zhilyaev, Hailiang Yu. Fabrication and Characterization of High-Bonding-Strength Al/Ti/Al-Laminated Composites via Cryorolling [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(6): 871-880.
[8]	Yue Su, Shun-Cun Luo, Liang Meng, Piao Gao, Ze-Min Wang. Selective Laser Melting of In Situ TiB/Ti6Al4V Composites: Formability, Microstructure Evolution and Mechanical Performance [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(6): 774-788.
[9]	Dong Li, Chaoyu Wang, Yishi Su, Di Zhang, Qiubao Ouyang. Governing the Inclination Angle of Graphite Flakes in the Graphite Flake/Al Composites by Controlling the Al Particle Size via Flake Powder Metallurgy [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(5): 649-658.
[10]	Tielong Han, Jiajun Li, Naiqin Zhao, Chunnian He. Fabrication of Graphene Nanoplates Modified with Nickel Nanoparticles for Reinforcing Copper Matrix Composites [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(5): 643-648.
[11]	Jin Hyuk Choi, Gobinda Gyawali, Dhani Ram Dhakal, Bhupendra Joshi, Soo Wohn Lee. Electrodeposited Ni-W-TiC Composite Coatings: Effect of TiC Reinforcement on Microstructural and Tribological Properties [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(4): 573-582.
[12]	Le Zhang, Wei Wang, fei Xiao, Shahzad M. Babar, Yiyin Shan, Ke Yang. Ultra-thin Laminated Metal Composites with Ultra-high Strength and Excellent Soft Magnetic Properties [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(3): 385-390.
[13]	Jinwei Yin, Peilong Zhou, Hanqin Liang, Dongxu Yao, Yongfeng Xia, Kaihui Zuo, YuPing Zeng. Microstructure and Mechanical Properties of Cu Matrix Composites Reinforced by TiB₂/TiN Ceramic Reinforcements [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1609-1617.
[14]	Qiu Zhang, Wencai Liu, Guohua Wu, Liang Zhang, Wenjiang Ding. Effect of Zn Addition on the Microstructure and Mechanical Properties of Cast Mg-10Gd-3.5Er-xZn-0.5Zr Alloys [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(11): 1505-1517.
[15]	Sami Bin Humam, Gobinda Gyawali, Dhani Ram Dhakal, Jin-Hyuk Choi, Soo Wohn Lee. Effect of Pulse and Direct Current Electrodeposition on Microstructure, Surface, and Scratch Resistance Properties of Ni-W Alloy and Ni-W-SiC Composite Coatings [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(10): 1321-1330.

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF SiC W/BAS (BaAl 2Si 2O 8) GLASS CERAMIC COMPOSITE

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments