INTRODUCTION OF NEW ANTICORROSIVE DESIGN FOR REACTORS   EXPOSED TO HIGH TEMPERATURE AND HIGH PRESSURE HYDROGEN

Abstract

Abstract: This paper integrates the characteristic of structure design and manufacture and maintenance for Chinese flat steel band wound pressure vessel(UCWPV) with the problems existing in current in service high temperature and pressure vessel exposed to hydrogen. In view of economy and safety it is suggested that it be practicable for UCWPV to act as reactors for platreating, hydrogenating, and catforming. UCWPV has not only potential advantages, but also removes shortages present in in-service reactors for hydrogen.

Key words: design, pressure vessel, hydrogen attack

J.L. Li 1,2) , K.F. Wong 3) and G.H. Zhu 3) 1) Fushun Petroleum Institute,Fushun 113001,China 2) State Key Laboratory for Corrosion and Protection of Metal,Institute of Corrosion and Protection of Metals, The Chinese Academy of Sciences,Shenyang 110015, China 3) Zhejiang University, Hangzhou 310027, China. INTRODUCTION OF NEW ANTICORROSIVE DESIGN FOR REACTORS EXPOSED TO HIGH TEMPERATURE AND HIGH PRESSURE HYDROGEN[J]. Acta Metallurgica Sinica (English Letters), 1999, 12(5): 932-935.

[1]	Lin Jiang, Liang Zhang, Zhi-Quan Liu. Optimal Design of Co/In/Cu Sputtering Target Assembly Using Finite Element Method and Taguchi Method [J]. Acta Metallurgica Sinica (English Letters), 2019, 32(11): 1407-1414.
[2]	Feng-Xiang Qin,Yang Zhou,Chuan Ji,Zhen-Hua Dan,Guo-Qiang Xie,Sen Yang. Enhanced Mechanical Properties, Corrosion Behavior and Bioactivity of Ti-based Bulk Metallic Glasses with Minor Addition Elements [J]. Acta Metallurgica Sinica (English Letters), 2016, 29(11): 1011-1018.
[3]	Christoph Heinze, Thomas Michael, Andreas Pittner, Michael Rethmeier. Microcrack Formation During Gas Metal Arc Welding of High-Strength Fine-Grained Structural Steel [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(1): 140-148.
[4]	Liu FENG, Bangxin ZHOU, Jianchao PENG, Junan WANG. Crystal Structure Evolution of the Cu-rich Nano Precipitates from bcc to 9R in Reactor Pressure Vessel Model Steel [J]. Acta Metallurgica Sinica (English Letters), 2013, 26(6): 707-712.
[5]	Nian LIU, Guodong ZHANG. Optimal design of self-propagating high temperature one-dimensional nano-SnO₂ synthesis [J]. Acta Metallurgica Sinica (English Letters), 2011, 24(4): 321-325.
[6]	M. Balasubramanian, V. Jayabalan, V. Balasubramanian. Effect of process parameters of pulsed current tungsten inert gas welding on weld pool geometry of titanium welds [J]. Acta Metallurgica Sinica (English Letters), 2010, 23(4): 312-320.
[7]	Dashan SUI,Zhenshan CUI. Application of orthogonal experimental design and Tikhonov regularization method for the identification of parameters in the casting solidificationp rocess [J]. Acta Metallurgica Sinica (English Letters), 2009, 22(1): 13-21.
[8]	S.H. Song. Embrittlement of a Cr-Mo Low-Alloy Steel due to Low-Temperature Neutron Irradiation [J]. Acta Metallurgica Sinica (English Letters), 2006, 19(1): 20-26 .
[9]	X.G. Li. HEALING OF HYDROGEN ATTACK CRACK IN AUSTENITE STAINLESS STEEL UNDER HEAT TREATMENT [J]. Acta Metallurgica Sinica (English Letters), 2002, 15(4): 385-390 .
[10]	J. Brnic, G. Turkalj and M. Canadija Faculty of Engineering, Vukovarska 58, 51000 Rijeka, Croatia. OPTIMAL DESIGN PROCEDURE BASED ON VISCOPLASTIC MATERIAL BEHAVIOUR [J]. Acta Metallurgica Sinica (English Letters), 2000, 13(2): 587-592.
[11]	G. L. Ma, Y. H. Lu and C. Zhu 1) Northwest Institute for Nonferrous Metal Research, Baoji 721014, China 2) Baoji Nonferrous Metals Works, Baoji 721014, China. COMPOSITION AND PROPERTY OPTIMIZATION FOR TC4 Ti ALLOY [J]. Acta Metallurgica Sinica (English Letters), 2000, 13(2): 665-668.
[12]	C. Q. Wang and W. F. Feng National ho. of Advanced welding Technolgy, HIT, Harbin 150001,China. SELECTING CLUSTER MODEL IN Sn - BASED SOLDER ALLOY DESIGN WITH DV - X_α CALCULATION METHOD [J]. Acta Metallurgica Sinica (English Letters), 2000, 13(1): 84-88.
[13]	Yu. N. Sarave;O. I.Shpigunova(Institute of Shength Physics and Materials Science, Siberian Branch, Russian Academy Of Sciences,Tom-sk, Russia). COMPUTER-AIDED DESIGN OF ADAPTIVE PULSED ARC WELDING OF ROOT WELDS BY MELTING ELECTRODE [J]. Acta Metallurgica Sinica (English Letters), 2000, 13(1): 63-68.
[14]	D.M. Zhen, B.Q. Jiang, J. Yan and L.J. Xu Chemical Engineering Department of Nanchang University, Nanchang 330029, China. STUDY ON UNIFORMITY OF ELECTROLESS PLATING SOLUTION OF SOLAR CONTROL GLASS [J]. Acta Metallurgica Sinica (English Letters), 1999, 12(5): 1086-1089.
[15]	S.C. Fan 1) , X.H. Wang 2) , J.J. Zhang 2) and J.M. Wan 2) 1)School of Mechanical Engineering, Tianjin University, Tianjin 300070, China 2)School of Mechanical Engineering, Hebei University of Technology, Tianjin 300130, China. APPLICATION OF UNIFORM PRECRIPTION DESIGN IN STUDYING OF WEARREISTANT COATING IN PLASMA SPRAYING [J]. Acta Metallurgica Sinica (English Letters), 1999, 12(5): 765-770.

INTRODUCTION OF NEW ANTICORROSIVE DESIGN FOR REACTORS EXPOSED TO HIGH TEMPERATURE AND HIGH PRESSURE HYDROGEN

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments