| [1] |
Zhen-Hu Duan, Hou-Fa Shen, Bai-Cheng Liu.
A Numerical Study of the Effect of Multiple Pouring on Macrosegregation in a 438-Ton Steel Ingot
[J]. Acta Metallurgica Sinica (English Letters), 2015, 28(9): 1123-1133.
|
| [2] |
Chetan P. Nikhare.
Prediction of Springback in Long Channels
[J]. Acta Metallurgica Sinica (English Letters), 2015, 28(12): 1525-1531.
|
| [3] |
Zu-Qi Hu, Xin-Jian Zhang, Shu-Sen Wu.
Microstructure, Mechanical Properties and Die-Filling Behavior of High-Performance Die-Cast Al-Mg-Si-Mn Alloy
[J]. Acta Metallurgica Sinica (English Letters), 2015, 28(11): 1344-1353.
|
| [4] |
Zhenmin WANG, Fang YAN,Pengcheng ZHAO.
Numerical Simulation of the Dynamic Behaviors of a Gas Tungsten Welding Arc for Joining Magnesium Alloy AZ61A
[J]. Acta Metallurgica Sinica (English Letters), 2013, 26(5): 588-596.
|
| [5] |
Dean DENG, Yangang TONG, Ninshu MA, Hidekazu MURAKAWA.
Prediction of the Residual Welding Stress in 2.25Cr-1Mo Steel by Taking into Account the Effect of the Solid-State Phase Transformations
[J]. Acta Metallurgica Sinica (English Letters), 2013, 26(3): 333-339.
|
| [6] |
Guoxiang XU, Chuansong WU, Xuezhou MA, Xuyou WANG.
Numerical Analysis of Welding Residual Stress and Distortion in Laser+GMAW Hybrid Welding of Aluminum Alloy T-Joint
[J]. Acta Metallurgica Sinica (English Letters), 2013, 26(3): 352-360.
|
| [7] |
Junqiu ZHANG, Zhiwu HAN,Wei YIN, Huiyuan WANG,Chao GE, Jialian JIANG.
Numerical Experiment of the Solid Particle Erosion of Bionic Configuration Blade of Centrifugal Fan
[J]. Acta Metallurgica Sinica (English Letters), 2013, 26(1): 16-24.
|
| [8] |
Wen ZHENG,Min WANG,Liang KONG,Xuanting CHENG,Ming LEI .
Parameter optimization of dissimilar resistance spot welding on ultra-high strength hot-stamped steel and mild steel by numerical simulation
[J]. Acta Metallurgica Sinica (English Letters), 2012, 25(6): 487-498.
|
| [9] |
Prosenjit Das, Sudip K. Samanta, Himadri Chattopadhyay,Pradip Dutta.
Effect of pouring temperature on cooling slope casting of semi-solid Al-Si-Mg alloy
[J]. Acta Metallurgica Sinica (English Letters), 2012, 25(5): 329-339.
|
| [10] |
Shude JI,AiliZOU, Yumei YUE, Guohong LUAN,Yanye JIN, Fu LI.
Numerical simulation of effect of rotational tool with screw on material flow behavior of friction stir welding of Ti6Al4V alloy
[J]. Acta Metallurgica Sinica (English Letters), 2012, 25(5): 365-373.
|
| [11] |
Haichao CUI, Fenggui LU, Xinhua TANG,Shun YAO.
Particles migration behavior during laser keyhole welding of ZL101/TiB2 composites
[J]. Acta Metallurgica Sinica (English Letters), 2012, 25(3): 190-200.
|
| [12] |
Dongrong LIU, Xiuhong KANG, Baoguang SANG, Dianzhong LI.
Numerical study of macrosegregation formation of ingot cast in normal sand mold and water-cooled sand mold
[J]. Acta Metallurgica Sinica (English Letters), 2011, 24(1): 54-64.
|
| [13] |
Huaping TANG, Changqian HAO, Yongzheng JIANG, Lei DU.
Forming process and numerical simulation of making upset on oil drill pipe
[J]. Acta Metallurgica Sinica (English Letters), 2010, 23(1): 72-80.
|
| [14] |
Haipeng JIN,Jiarong LI,Dong PAN.
Application of inverse method to estimation of boundary conditions during investment casting simulation
[J]. Acta Metallurgica Sinica (English Letters), 2009, 22(6): 429-434.
|
| [15] |
Dashan SUI,Zhenshan CUI.
Application of orthogonal experimental design and Tikhonov regularization method for the identification of parameters in the casting solidificationp rocess
[J]. Acta Metallurgica Sinica (English Letters), 2009, 22(1): 13-21.
|
WeChat
