STUDY ON SYNCHRONIZER HUB PLASTIC FORMING

Search for articles:

Acta Metallurgica Sinica (English Letters) ›› 2000, Vol. 13 ›› Issue (2): 446-450.

• Research paper • Previous Articles Next Articles

STUDY ON SYNCHRONIZER HUB PLASTIC FORMING

B. H. Zhang and Z. M. Zhang North China Institute of Technology, Taiyuan 030051, China Mancuscript received 30 July 1999

Received:2000-04-25 Revised:2000-04-25 Online:2000-04-25 Published:2009-10-10

Abstract

Abstract: Metal flowing has been numerically simulated for synchronizer hub at different forming conditions. The influences of billet shape, frictional factor,deformation degree and radius of rounded corner on form- ing for been studied and the processing parameters have been optimized. On the basis, a new technol- ogy of refilling multiplicity forming has been put forward and workpiece that meets the requirement of synchronizer hub has been manufactured.

Key words: synchronizer hub, plastic forming, numerical simulation

B. H. Zhang and Z. M. Zhang North China Institute of Technology, Taiyuan 030051, China Mancuscript received 30 July 1999. STUDY ON SYNCHRONIZER HUB PLASTIC FORMING[J]. Acta Metallurgica Sinica (English Letters), 2000, 13(2): 446-450.

About AMSE

Authors and reviewers

Contact

WeChat

[1]	Zhen-Hu Duan, Hou-Fa Shen, Bai-Cheng Liu. A Numerical Study of the Effect of Multiple Pouring on Macrosegregation in a 438-Ton Steel Ingot [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(9): 1123-1133.
[2]	Chetan P. Nikhare. Prediction of Springback in Long Channels [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(12): 1525-1531.
[3]	Zu-Qi Hu, Xin-Jian Zhang, Shu-Sen Wu. Microstructure, Mechanical Properties and Die-Filling Behavior of High-Performance Die-Cast Al-Mg-Si-Mn Alloy [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(11): 1344-1353.
[4]	Zhenmin WANG, Fang YAN,Pengcheng ZHAO. Numerical Simulation of the Dynamic Behaviors of a Gas Tungsten Welding Arc for Joining Magnesium Alloy AZ61A [J]. Acta Metallurgica Sinica (English Letters), 2013, 26(5): 588-596.
[5]	Dean DENG, Yangang TONG, Ninshu MA, Hidekazu MURAKAWA. Prediction of the Residual Welding Stress in 2.25Cr-1Mo Steel by Taking into Account the Effect of the Solid-State Phase Transformations [J]. Acta Metallurgica Sinica (English Letters), 2013, 26(3): 333-339.
[6]	Guoxiang XU, Chuansong WU, Xuezhou MA, Xuyou WANG. Numerical Analysis of Welding Residual Stress and Distortion in Laser+GMAW Hybrid Welding of Aluminum Alloy T-Joint [J]. Acta Metallurgica Sinica (English Letters), 2013, 26(3): 352-360.
[7]	Junqiu ZHANG, Zhiwu HAN,Wei YIN, Huiyuan WANG,Chao GE, Jialian JIANG. Numerical Experiment of the Solid Particle Erosion of Bionic Configuration Blade of Centrifugal Fan [J]. Acta Metallurgica Sinica (English Letters), 2013, 26(1): 16-24.
[8]	Wen ZHENG,Min WANG,Liang KONG,Xuanting CHENG,Ming LEI . Parameter optimization of dissimilar resistance spot welding on ultra-high strength hot-stamped steel and mild steel by numerical simulation [J]. Acta Metallurgica Sinica (English Letters), 2012, 25(6): 487-498.
[9]	Prosenjit Das, Sudip K. Samanta, Himadri Chattopadhyay,Pradip Dutta. Effect of pouring temperature on cooling slope casting of semi-solid Al-Si-Mg alloy [J]. Acta Metallurgica Sinica (English Letters), 2012, 25(5): 329-339.
[10]	Shude JI,AiliZOU, Yumei YUE, Guohong LUAN,Yanye JIN, Fu LI. Numerical simulation of effect of rotational tool with screw on material flow behavior of friction stir welding of Ti6Al4V alloy [J]. Acta Metallurgica Sinica (English Letters), 2012, 25(5): 365-373.
[11]	Haichao CUI, Fenggui LU, Xinhua TANG,Shun YAO. Particles migration behavior during laser keyhole welding of ZL101/TiB₂ composites [J]. Acta Metallurgica Sinica (English Letters), 2012, 25(3): 190-200.
[12]	Dongrong LIU, Xiuhong KANG, Baoguang SANG, Dianzhong LI. Numerical study of macrosegregation formation of ingot cast in normal sand mold and water-cooled sand mold [J]. Acta Metallurgica Sinica (English Letters), 2011, 24(1): 54-64.
[13]	Huaping TANG, Changqian HAO, Yongzheng JIANG, Lei DU. Forming process and numerical simulation of making upset on oil drill pipe [J]. Acta Metallurgica Sinica (English Letters), 2010, 23(1): 72-80.
[14]	Haipeng JIN,Jiarong LI,Dong PAN. Application of inverse method to estimation of boundary conditions during investment casting simulation [J]. Acta Metallurgica Sinica (English Letters), 2009, 22(6): 429-434.
[15]	Dashan SUI,Zhenshan CUI. Application of orthogonal experimental design and Tikhonov regularization method for the identification of parameters in the casting solidificationp rocess [J]. Acta Metallurgica Sinica (English Letters), 2009, 22(1): 13-21.

STUDY ON SYNCHRONIZER HUB PLASTIC FORMING

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments