EFFECT OF THE CONTROLLED ROLLING CONTROLLED COOLING ON STRENGTH AND DUCTILITY OF THE BAINITE  MICRO ALLOYED ENGINEERING STEEL

Acta Metallurgica Sinica (English Letters) ›› 2000, Vol. 13 ›› Issue (2): 421-427.

• Research paper • Next Articles

EFFECT OF THE CONTROLLED ROLLING CONTROLLED COOLING ON STRENGTH AND DUCTILITY OF THE BAINITE MICRO ALLOYED ENGINEERING STEEL

Z. Li, G. D. Wang,X. H. Liu and C. Y. Ma The State Key Lab. of Rolling Technology and Automation, Northeastern Univarsity, Shenyang 110006 China

Received:2000-04-25 Revised:2000-04-25 Online:2000-04-25 Published:2009-10-10

Abstract

Abstract: The continuous cooling transformation of hot deformation austenite austenite of test steel and the effect of different processing schedules of controlled rolling and controlled cooling on the strength and ductility have been studied. The theory and the experiment base are presented for controlled rolling and controlled cooling of the SBL micro alloyed engineering steel.

Key words: micro alloyed engineering steel, controlled rolling and controlled cooling, strength and ductility, bainite

Z. Li, G. D. Wang,X. H. Liu and C. Y. Ma The State Key Lab. of Rolling Technology and Automation, Northeastern Univarsity, Shenyang 110006 China. EFFECT OF THE CONTROLLED ROLLING CONTROLLED COOLING ON STRENGTH AND DUCTILITY OF THE BAINITE MICRO ALLOYED ENGINEERING STEEL[J]. Acta Metallurgica Sinica (English Letters), 2000, 13(2): 421-427.

[1]	Mohamad Ebrahimnia, Yujiang Xie, Changtai Chi. Effect of laser power and deposition environment on the microstructure and properties of direct laser metal-deposited 12CrNi2 steel [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(4): 528-538.
[2]	Hamid Mousalou, Sasan Yazdani, Naghi Parvini Ahmadi, Behzad Avishan. Nanostructured Carbide-Free Bainite Formation in Low Carbon Steel [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(12): 1635-1644.
[3]	Yong-Han Li, Zhong-Hua Jiang, Zhen-Dan Yang, Jue-Shun Zhu. Effect of Indirect Transformation of Retained Austenite During Tempering on the Charpy Impact Toughness of a Low-Alloy Cr-Mo-V Steel [J]. Acta Metallurgica Sinica (English Letters), 2020, 33(10): 1346-1358.
[4]	Bo Han, Lei Chen, Su-Jun Wu. Effect of Austempering-Partitioning on the Bainitic Transformation and Mechanical Properties of a High-Carbon Steel [J]. Acta Metallurgica Sinica (English Letters), 2015, 28(5): 614-618.
[5]	Genlian Fan, Run Xu, Zhanqiu Tan, Di Zhang, Zhiqiang Li. Development of Flake Powder Metallurgy in Fabricating Metal Matrix Composites: A Review [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(5): 806-815.
[6]	Li Changsheng, Ma Biao, Li Tao, Zhu Tao. Microstructure and Mechanical Properties of 1,000 MPa Ultra-High Strength Hot-Rolled Plate Steel for Coal Mine Refuge Chamber [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(3): 422-429.
[7]	Sun Chao, Yang Shanwu, Liu Guoliang. Evolution of Microstructures of a Low Carbon Bainitic Steel Held at High Service Temperature [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(3): 436-443.
[8]	Cui Junjun, Zhang Hongyun, Chen Liqing, Li Haizhi, Tong Weiping. Microstructure and Mechanical Properties of a Wear-Resistant As-Cast Alloyed Bainite Ductile Iron [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(3): 476-482.
[9]	Alejandro Leiro, Arash Roshan, Karl-Gustaf Sundin, Esa Vuorinen, Braham Prakash. Fatigue of 0.55C-1.72Si Steel with Tempered Martensitic and Carbide-Free Bainitic Microstructures [J]. Acta Metallurgica Sinica (English Letters), 2014, 27(1): 55-62.
[10]	Hongyu SONG, Shunhu ZHANG, Liangyun LAN, Canming LI, Haitao LIU, Dewen ZHAO,Guodong WANG. Effect of Direct Quenching on Microstructure and Mechanical Properties of a Wear-resistant Steel [J]. Acta Metallurgica Sinica (English Letters), 2013, 26(4): 390-398.
[11]	Minghui CAI,Hua DING,Jiansu ZHANG,Long LI. Effect of silicon and prior deformation of austenite on isothermal transformation in low carbon steels [J]. Acta Metallurgica Sinica (English Letters), 2009, 22(2): 100-109.
[12]	L.J. Zhu, D. Wu, X.M. Zhao. Effect Of Silicon Addition On Recrystallization And Phase Transformation Behavior Of High-Strength Hot-Rolled Trip Steel [J]. Acta Metallurgica Sinica (English Letters), 2008, 21(3): 163-168 .
[13]	H.B. Wu, H.T. Jiang, S.W. Yang, D. Tang, X.L. He. Thermal Stability of Non-Equilibrius Microstructure in Microalloyed Steel During Reheating [J]. Acta Metallurgica Sinica (English Letters), 2007, 20(5): 313-326 .
[14]	H.S. Fang and C. Zhang Departmentof Materials Science and Engineering ,Tsinghua University,Beijing 100084 ,China. SYSTEMETIC VIE WPOINTS ON BAINITE FORMATION MECHANISM [J]. Acta Metallurgica Sinica (English Letters), 1999, 12(4): 315-321.
[15]	Z.D. Wang; J.B. Qu; X.H. Liu and G.D. Wang(State Key Lab of Rolling and Automation, Northeastern University, Shenyang 110006, China). INFLUENCE OF HOT DEFORMATION ON CONTINUOUS COOLING BAINITIC TRANSFORMATION IN A LOW CARBON STEEL [J]. Acta Metallurgica Sinica (English Letters), 1998, 11(2): 121-127.

EFFECT OF THE CONTROLLED ROLLING CONTROLLED COOLING ON STRENGTH AND DUCTILITY OF THE BAINITE MICRO ALLOYED ENGINEERING STEEL

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments