| [1] |
L. B. Tong, J. H. Chu, D. N. Zou, Q. Sun, S. Kamado, H. G. Brokmeier, M. Y. Zheng.
Simultaneously Enhanced Mechanical Properties and Damping Capacities of ZK60 Mg Alloys Processed by Multi-Directional Forging
[J]. Acta Metallurgica Sinica (English Letters), 2021, 34(2): 265-277.
|
| [2] |
Xi Zhao, Fa-Fa Yan, Zhi-Min Zhang, Peng-Cheng Gao, Shu-Chang Li.
Influence of Heat Treatment on Precipitation Behavior and Mechanical Properties of Extruded AZ80 Magnesium Alloy
[J]. Acta Metallurgica Sinica (English Letters), 2021, 34(1): 54-64.
|
| [3] |
Xiaohui Shi, Zuhan Cao, Zhiyuan Fan, Junwei Qiao.
Texture Evolution Behavior and Its Triggered Mechanical Anisotropy of CP Ti During Severe Cold Rolling and Subsequent Annealing
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1271-1282.
|
| [4] |
Fenghua Wang, Peng Su, Linxin Qin, Shuai Dong, Yunliang Li, Jie Dong.
Microstructure and Mechanical Properties of Mg-3Al-Zn Magnesium Alloy Sheet by Hot Shear Spinning
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1226-1234.
|
| [5] |
Guohua Wu, Chunchang Shi, Liang Zhang, Wencai Liu, Antao Chen, Wenjiang Ding.
Effect of Different Ageing Processes on Microstructure and Mechanical Properties of Cast Al-3Li-2Cu-0.2Zr Alloy
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1243-1251.
|
| [6] |
Lu An, Yan-Tao Sun, Shan-Ping Lu, Zhen-Bo Wang.
Enhanced Fatigue Property of Welded S355J2W Steel by Forming a Gradient Nanostructured Surface Layer
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(9): 1252-1258.
|
| [7] |
Yuan Yu, Peiying Shi, Kai Feng, Jiongjie Liu, Jun Cheng, Zhuhui Qiao, Jun Yang, Jinshan Li, Weimin Liu.
Effects of Ti and Cu on the Microstructure Evolution of AlCoCrFeNi High-Entropy Alloy During Heat Treatment
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(8): 1077-1090.
|
| [8] |
Hou-Long Liu, Ling-Ling Liu, Ming-Yu Ma, Li-Qing Chen.
Influence of Finish Rolling Temperature on Microstructure and Mechanical Properties of a 19Cr1.5Mo0.5 W Ferritic Stainless Steel
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(7): 991-1000.
|
| [9] |
Zheng-Rong Ye, Zhi-Chao Qiu, Zheng-Bin Wang, Yu-Gui Zheng, Ran Yi, Xiang Zhou.
Can the Prior Cathodic Polarisation Treatment Remove the Air-Formed Surface Film and Is It Necessary for the Potentiodynamic Polarisation Test?
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(6): 839-845.
|
| [10] |
Wen-Chao Dong, Ming-Yue Wen, Hui-Yong Pang, Shan-Ping Lu.
Effect of Post-weld Tempering on the Microstructure and Mechanical Properties in the Simulated HAZs of a High-Strength-High-Toughness Combination Marine Engineering Steel
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(3): 391-402.
|
| [11] |
Guercio Giuseppe Del, Manuela Galati, Abdollah Saboori, Paolo Fino, Luca Iuliano.
Microstructure and Mechanical Performance of Ti-6Al-4V Lattice Structures Manufactured via Electron Beam Melting (EBM): A Review
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(2): 183-203.
|
| [12] |
Jian Xun, Gaoyong Lin, Huiqun Liu, Siyu Zhao, Jing Chen, Xun Dai, Ruiqian Zhang.
Texture Evolution and Dynamic Recrystallization of Zr-1Sn-0.3Nb-0.3Fe-0.1Cr Alloy During Hot Rolling
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(2): 215-224.
|
| [13] |
Ying Ma, Fu-Yin Han, Cheng Liu, Ming-Zhe Li.
Microstructure, Texture Evolution, and Mechanical Properties of ECAP-Processed ZAT522 Magnesium Alloy
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(2): 233-242.
|
| [14] |
A. Shah S., D. Wu, Chen R. S., Song G. S..
Temperature Effects on the Microstructures of Mg-Gd-Y Alloy Processed by Multi-direction Impact Forging
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(2): 243-251.
|
| [15] |
Jiang-Li Ning, Bo Xu, Yun-Li Feng, Xu-Dong Li, Xin-Kang Li, Wei-Ping Tong.
Tension-Compression Yield Asymmetry Influenced by the Variable Deformation Modes in Gradient Structure Mg Alloys
[J]. Acta Metallurgica Sinica (English Letters), 2020, 33(2): 252-266.
|
WeChat
